)]}'
{
  "log": [
    {
      "commit": "4916e34ddfc7c48b78ed7ac81fe7063287504cd2",
      "tree": "1d173567e74bceb55a7904b3cccc0e1cbb535f57",
      "parents": [
        "770fe4a07caa37cca50d32fb4c218ea63607e34c"
      ],
      "author": {
        "name": "Nico Huber",
        "email": "nico.huber@secunet.com",
        "time": "Fri Nov 04 14:37:53 2016 +0100"
      },
      "committer": {
        "name": "Nico Huber",
        "email": "nico.h@gmx.de",
        "time": "Tue Nov 29 23:43:40 2016 +0100"
      },
      "message": "gma: Configure panel fitter / pipe scaler\n\nIf the framebuffer size is smaller than the display mode\u0027s resolution,\nenable the panel fitter or pipe scaler (on Skylake+).\n\nChange-Id: I0a648a7e7bf495a80636a589a74b698ecba7e7d5\nSigned-off-by: Nico Huber \u003cnico.huber@secunet.com\u003e\nReviewed-on: https://review.coreboot.org/17263\nReviewed-by: Arthur Heymans \u003carthur@aheymans.xyz\u003e\nTested-by: Nico Huber \u003cnico.h@gmx.de\u003e\n"
    },
    {
      "commit": "dcd274b28d49570a7fdeace8806af3d17cfd92dd",
      "tree": "df95cee9fa72ef9b66f8db59fc7a7bbde4f1aa05",
      "parents": [
        "c7a4fee02f526fd851ac87acae5862dc7bb34800"
      ],
      "author": {
        "name": "Nico Huber",
        "email": "nico.huber@secunet.com",
        "time": "Thu Nov 03 20:15:39 2016 +0100"
      },
      "committer": {
        "name": "Nico Huber",
        "email": "nico.h@gmx.de",
        "time": "Thu Nov 17 11:21:45 2016 +0100"
      },
      "message": "gma: Validate maximum scalable width\n\nChange-Id: Iba8199a2451e1976ac8aa0f8632d0846fc0caeb4\nSigned-off-by: Nico Huber \u003cnico.huber@secunet.com\u003e\nReviewed-on: https://review.coreboot.org/17261\nTested-by: Nico Huber \u003cnico.h@gmx.de\u003e\nReviewed-by: Martin Roth \u003cmartinroth@google.com\u003e\n"
    },
    {
      "commit": "d55afebf8bc03f87d1a8b8f92144c2f8da6ca0ae",
      "tree": "7703f06d76adeaf58b1fd9c8980716410c92909d",
      "parents": [
        "393aa8a8b62455d69651122d1aa3dacc21dd750c"
      ],
      "author": {
        "name": "Nico Huber",
        "email": "nico.huber@secunet.com",
        "time": "Fri Oct 21 14:31:10 2016 +0200"
      },
      "committer": {
        "name": "Nico Huber",
        "email": "nico.h@gmx.de",
        "time": "Sat Oct 29 01:26:13 2016 +0200"
      },
      "message": "gma i2c: Make I2C port for VGA displays a config option\n\nBoards with a DVI-I connector share the I2C pins for both analog and\ndigital displays. In that case, the EDID for a VGA display has to be\nread over the I2C interface of the coupled digital port.\n\nTEST\u003dBooted kontron/ktqm77 with DVI-I to VGA cable. Display is detected\n     and enabled (but doesn\u0027t show anything, yet?).\n\nChange-Id: I5c4f77d5ad1927f075877a3719361ed2193f4c39\nSigned-off-by: Nico Huber \u003cnico.huber@secunet.com\u003e\nReviewed-on: https://review.coreboot.org/17086\nTested-by: Nico Huber \u003cnico.h@gmx.de\u003e\nReviewed-by: Stefan Reinauer \u003cstefan.reinauer@coreboot.org\u003e\n"
    },
    {
      "commit": "abe3de257c482ebeb90cf9f93d69ae744c60f9a6",
      "tree": "6181e69238840704e1370e005ddca3ee7e1f1d4d",
      "parents": [
        "f54d0962018b0443973f84e525e0d112ce956800"
      ],
      "author": {
        "name": "Nico Huber",
        "email": "nico.huber@secunet.com",
        "time": "Thu Oct 20 15:03:46 2016 +0200"
      },
      "committer": {
        "name": "Nico Huber",
        "email": "nico.h@gmx.de",
        "time": "Sat Oct 29 01:23:09 2016 +0200"
      },
      "message": "gma dp aux: Program 2x bit clock divider\n\nThis setting exists for any platform before Skylake. Some have sane\ndefaults after reset, some don\u0027t. So we always set the correct divisor.\n\nThis makes external DP output work with coreboot on Ivy Bridge.\n\nChange-Id: I91d8030a985cc35c7cf826c0276753137b5d6b77\nSigned-off-by: Nico Huber \u003cnico.huber@secunet.com\u003e\nReviewed-on: https://review.coreboot.org/17072\nTested-by: Nico Huber \u003cnico.h@gmx.de\u003e\nReviewed-by: Arthur Heymans \u003carthur@aheymans.xyz\u003e\n"
    },
    {
      "commit": "f54d0962018b0443973f84e525e0d112ce956800",
      "tree": "80d5b86e918fab1d92d7455eec2c3590c0d354a8",
      "parents": [
        "125a29e84242900a5556e8a068227e59420c3e1c"
      ],
      "author": {
        "name": "Nico Huber",
        "email": "nico.huber@secunet.com",
        "time": "Thu Oct 20 14:17:18 2016 +0200"
      },
      "committer": {
        "name": "Nico Huber",
        "email": "nico.h@gmx.de",
        "time": "Sat Oct 29 01:21:38 2016 +0200"
      },
      "message": "gma: Program PCH_RAWCLK_FREQ register\n\nThis seems to be a scratchpad register to tell later drivers which\nfrequency the platform uses. Linux reads this but never writes the\nregister.\n\nChange-Id: I55af7c7b675da580c7f52d9997262b232019132c\nSigned-off-by: Nico Huber \u003cnico.huber@secunet.com\u003e\nReviewed-on: https://review.coreboot.org/17071\nTested-by: Nico Huber \u003cnico.h@gmx.de\u003e\nReviewed-by: Stefan Reinauer \u003cstefan.reinauer@coreboot.org\u003e\n"
    },
    {
      "commit": "125a29e84242900a5556e8a068227e59420c3e1c",
      "tree": "925c85a1e9a5dc0506c9ccd26cd8ba4e05dd3d33",
      "parents": [
        "be4eaddc67ee3a11b1222db049cd8830491363d9"
      ],
      "author": {
        "name": "Nico Huber",
        "email": "nico.huber@secunet.com",
        "time": "Tue Oct 18 00:23:54 2016 +0200"
      },
      "committer": {
        "name": "Nico Huber",
        "email": "nico.h@gmx.de",
        "time": "Thu Oct 20 13:05:15 2016 +0200"
      },
      "message": "Relicense libgfxinit under GPL v2+\n\nChange-Id: I5d683dda83d23e89955a4d840b5570bd8642834a\nSigned-off-by: Nico Huber \u003cnico.huber@secunet.com\u003e\nReviewed-on: https://review.coreboot.org/17052\nReviewed-by: Paul Menzel \u003cpaulepanter@users.sourceforge.net\u003e\nReviewed-by: Stefan Reinauer \u003cstefan.reinauer@coreboot.org\u003e\nTested-by: Nico Huber \u003cnico.h@gmx.de\u003e\nReviewed-by: Patrick Georgi \u003cpgeorgi@google.com\u003e\n"
    },
    {
      "commit": "83693c8d7d87f5cebe120abdf25951c9e212b319",
      "tree": "249eff589087c2ed8deeeeda1710ff49a3c3c810",
      "parents": [],
      "author": {
        "name": "Nico Huber",
        "email": "nico.huber@secunet.com",
        "time": "Sat Oct 08 22:17:55 2016 +0200"
      },
      "committer": {
        "name": "Nico Huber",
        "email": "nico.h@gmx.de",
        "time": "Sun Oct 09 11:34:25 2016 +0200"
      },
      "message": "Initial upstream commit\n\nThe history contained unlicensed code so everything got squashed, sorry.\n\nChange-Id: I9f5775208f9df6fb29074bf3bc498f68cb17b3a0\nSigned-off-by: Nico Huber \u003cnico.huber@secunet.com\u003e\n"
    }
  ]
}