)]}'
{
  "log": [
    {
      "commit": "450c24cbf61b758ffa39cde702015c99eb46a8f0",
      "tree": "7ea770b5c3f41d73f1e4c7bc25139b7083b427ac",
      "parents": [
        "3f86b0b121ff5f07d5d1ab5c1b210ea92620bb30"
      ],
      "author": {
        "name": "Angel Pons",
        "email": "th3fanbus@gmail.com",
        "time": "Wed May 13 00:49:52 2020 +0200"
      },
      "committer": {
        "name": "Nico Huber",
        "email": "nico.h@gmx.de",
        "time": "Sun Jul 19 18:04:00 2020 +0000"
      },
      "message": "haswell: Make VGA on FDI work\n\nAttempting to light up a 1920x1080 monitor through VGA with libgfxinit\non Haswell would either hang the system or show garbage on the monitor.\nThis was due to two different problems around FDI initialization code.\n\nThe system would only hang if libgfxinit was the first program to light\nup a monitor on VGA. This is because no one had performed the required\nFDI mPHY initialization that is described on the Haswell graphics PRMs.\nAdd it to libgfxinit alongside some code to disable bending CLKOUT_DP.\n\nEven with the FDI mPHY initialization in place, the garbage would still\nbe present on the VGA monitor. Digital interfaces were not affected.\nBy carefully dumping and comparing the display registers of a good and\na bad case, it was determinted that the fault was due to a mismatched\nlink width for FDI. The FDI link between the iGPU and the Lynxpoint PCH\ncan operate in either x1 or x2 width, depending on the bandwidth needs\nof the monitor on the PCH\u0027s VGA port. To drive a 1920x1080 VGA monitor,\nit is necessary to use both FDI lanes. Moreover, both ends of the link\nneed to be configured to use the same link width. However, the wrong\nlink width was assumed when configuring the display pipe, because\n`DP.Lane_Count` was used unconditionally instead of `FDI.Lane_Count`.\n\nAfter fixing both issues, gfx_test is able to light up a 1920x1080 VGA\nmonitor on the Asrock B85M Pro4 successfully, even after a S3 resume.\n\nChange-Id: Ieabe3b7f947be2ef488ddb57bfeae85fa055d360\nSigned-off-by: Angel Pons \u003cth3fanbus@gmail.com\u003e\nReviewed-on: https://review.coreboot.org/c/libgfxinit/+/41343\nTested-by: Nico Huber \u003cnico.h@gmx.de\u003e\nReviewed-by: Nico Huber \u003cnico.h@gmx.de\u003e\n"
    },
    {
      "commit": "3f86b0b121ff5f07d5d1ab5c1b210ea92620bb30",
      "tree": "8bef2905e89040626ee649e5ae1f1f85c1488112",
      "parents": [
        "c0db994900fe9dabff9efd1b7fc547288a68c6c0"
      ],
      "author": {
        "name": "Angel Pons",
        "email": "th3fanbus@gmail.com",
        "time": "Sat Jul 18 00:22:32 2020 +0200"
      },
      "committer": {
        "name": "Nico Huber",
        "email": "nico.h@gmx.de",
        "time": "Sun Jul 19 17:38:39 2020 +0000"
      },
      "message": "Move `PSR_Off` out of `Power_And_Clocks_Haswell`\n\nAllowing other platforms to use the Haswell-specific power and clocks\npackage precludes with\u0027ing other Haswell-specific units unless they are\nplaced under `haswell_shared` as well. This unnecessarily forces several\nimplementation-specific details to be public, breaking encapsulation.\n\nThe only benefit is that the `PSR_Off` procedure gets to be shared.\nHowever, we can allow reusing said procedure without having to destroy\nencapsulation, by moving it elsewhere. As the SRD/PSR registers are tied\nto transcoders, place `PSR_Off` and the corresponding definitions to the\ncommon `Transcoder` package. Also update the callers of this procedure\nto refer to the `Transcoder` package, and then drop the visibility of\nthe power and clocks package for Haswell.\n\nChange-Id: I7483409b8b7db58874cbba3c0a7edb1968bba456\nSigned-off-by: Angel Pons \u003cth3fanbus@gmail.com\u003e\nReviewed-on: https://review.coreboot.org/c/libgfxinit/+/43563\nTested-by: Nico Huber \u003cnico.h@gmx.de\u003e\nReviewed-by: Nico Huber \u003cnico.h@gmx.de\u003e\n"
    },
    {
      "commit": "730f17c6abf9be8b43734dbfabe90256d479fecb",
      "tree": "785a5838e616535e58743d977745733addea6aed",
      "parents": [
        "01b680ff020b1bcc9e5d8a864affd47bac75488b"
      ],
      "author": {
        "name": "Nico Huber",
        "email": "nico.huber@secunet.com",
        "time": "Mon Jun 12 15:51:25 2017 +0200"
      },
      "committer": {
        "name": "Nico Huber",
        "email": "nico.h@gmx.de",
        "time": "Tue Jul 25 20:21:27 2017 +0000"
      },
      "message": "gma hsw bdw: Add DDI buffer translations\n\nChange-Id: Ib87be86e2853e6b9df7e19dd9cb80d4f7effefc5\nSigned-off-by: Nico Huber \u003cnico.huber@secunet.com\u003e\nReviewed-on: https://review.coreboot.org/20166\nTested-by: Nico Huber \u003cnico.h@gmx.de\u003e\nReviewed-by: Stefan Reinauer \u003cstefan.reinauer@coreboot.org\u003e\n"
    },
    {
      "commit": "01b680ff020b1bcc9e5d8a864affd47bac75488b",
      "tree": "7800b9c5ed6c760e2f7f81335b17b94c66d9e09f",
      "parents": [
        "247adf39f6172aace09aef819c245d92263a86f4"
      ],
      "author": {
        "name": "Nico Huber",
        "email": "nico.huber@secunet.com",
        "time": "Fri Jun 09 16:24:22 2017 +0200"
      },
      "committer": {
        "name": "Nico Huber",
        "email": "nico.h@gmx.de",
        "time": "Tue Jul 25 20:20:27 2017 +0000"
      },
      "message": "gma hsw+: Add boilerplate for DDI buffer translations\n\nChange-Id: I8fcba64a3c663b9eea7fb11088c62ea584d63e04\nSigned-off-by: Nico Huber \u003cnico.huber@secunet.com\u003e\nReviewed-on: https://review.coreboot.org/20129\nTested-by: Nico Huber \u003cnico.h@gmx.de\u003e\nReviewed-by: Stefan Reinauer \u003cstefan.reinauer@coreboot.org\u003e\n"
    },
    {
      "commit": "1c3b9285ceb3ff7bbb6dab8d9805ca3bda9d0ff3",
      "tree": "78a2fe0e2c18db7ad8bfd5bd81bee78ddb2f661a",
      "parents": [
        "fdd93659e03396051940988de328f28cdb7d448c"
      ],
      "author": {
        "name": "Nico Huber",
        "email": "nico.huber@secunet.com",
        "time": "Thu Feb 09 13:57:04 2017 +0100"
      },
      "committer": {
        "name": "Nico Huber",
        "email": "nico.h@gmx.de",
        "time": "Sat Jun 03 15:24:28 2017 +0200"
      },
      "message": "gma broxton: Add final glue\n\nAdd new configuration flags for Broxton and hook up its DDI_Phy\nimplementation in the shared Haswell DDI code. Haswell and Skylake\nget DDI_Phy stubs.\n\nTested (in Linux userspace) on ASRock J3455-ITX which exposes the\nfollowing ports:\n  o VGA through an active eDP to VGA converter chip\n  o HDMI 2.0 through an active DP to HDMI converter chip\n  o DVI-D connected to the SoC\n\nChange-Id: If72b228c6a4c45487261e6e7435d281ec2d97f38\nSigned-off-by: Nico Huber \u003cnico.huber@secunet.com\u003e\nReviewed-on: https://review.coreboot.org/18426\nTested-by: Nico Huber \u003cnico.h@gmx.de\u003e\nReviewed-by: Arthur Heymans \u003carthur@aheymans.xyz\u003e\n"
    },
    {
      "commit": "83693c8d7d87f5cebe120abdf25951c9e212b319",
      "tree": "249eff589087c2ed8deeeeda1710ff49a3c3c810",
      "parents": [],
      "author": {
        "name": "Nico Huber",
        "email": "nico.huber@secunet.com",
        "time": "Sat Oct 08 22:17:55 2016 +0200"
      },
      "committer": {
        "name": "Nico Huber",
        "email": "nico.h@gmx.de",
        "time": "Sun Oct 09 11:34:25 2016 +0200"
      },
      "message": "Initial upstream commit\n\nThe history contained unlicensed code so everything got squashed, sorry.\n\nChange-Id: I9f5775208f9df6fb29074bf3bc498f68cb17b3a0\nSigned-off-by: Nico Huber \u003cnico.huber@secunet.com\u003e\n"
    }
  ]
}