)]}'
{
  "log": [
    {
      "commit": "247adf39f6172aace09aef819c245d92263a86f4",
      "tree": "e1d886b8030deaa9222a4f165fb3ac914a3d6a23",
      "parents": [
        "0923b795fe51df4431061fa8b44d975aa8027f52"
      ],
      "author": {
        "name": "Nico Huber",
        "email": "nico.huber@secunet.com",
        "time": "Mon Jun 12 14:39:11 2017 +0200"
      },
      "committer": {
        "name": "Nico Huber",
        "email": "nico.h@gmx.de",
        "time": "Tue Jul 25 20:15:32 2017 +0000"
      },
      "message": "gma hsw+: Add default value for HDMI buffer levels\n\nAdd a configuration option to override the default HDMI translation.\nIt\u0027s not exported yet, as we\u0027ve never seen a non-default value being\nused. So this is just to have a common place for the defaults.\n\nAlso sets the recommended default value for Broxton as defined in the\nPRM.\n\nChange-Id: I59fae0fb4f444d9193a98b6a0edf337ecbba3b62\nSigned-off-by: Nico Huber \u003cnico.huber@secunet.com\u003e\nReviewed-on: https://review.coreboot.org/20165\nTested-by: Nico Huber \u003cnico.h@gmx.de\u003e\nReviewed-by: Stefan Reinauer \u003cstefan.reinauer@coreboot.org\u003e\n"
    },
    {
      "commit": "1c3b9285ceb3ff7bbb6dab8d9805ca3bda9d0ff3",
      "tree": "78a2fe0e2c18db7ad8bfd5bd81bee78ddb2f661a",
      "parents": [
        "fdd93659e03396051940988de328f28cdb7d448c"
      ],
      "author": {
        "name": "Nico Huber",
        "email": "nico.huber@secunet.com",
        "time": "Thu Feb 09 13:57:04 2017 +0100"
      },
      "committer": {
        "name": "Nico Huber",
        "email": "nico.h@gmx.de",
        "time": "Sat Jun 03 15:24:28 2017 +0200"
      },
      "message": "gma broxton: Add final glue\n\nAdd new configuration flags for Broxton and hook up its DDI_Phy\nimplementation in the shared Haswell DDI code. Haswell and Skylake\nget DDI_Phy stubs.\n\nTested (in Linux userspace) on ASRock J3455-ITX which exposes the\nfollowing ports:\n  o VGA through an active eDP to VGA converter chip\n  o HDMI 2.0 through an active DP to HDMI converter chip\n  o DVI-D connected to the SoC\n\nChange-Id: If72b228c6a4c45487261e6e7435d281ec2d97f38\nSigned-off-by: Nico Huber \u003cnico.huber@secunet.com\u003e\nReviewed-on: https://review.coreboot.org/18426\nTested-by: Nico Huber \u003cnico.h@gmx.de\u003e\nReviewed-by: Arthur Heymans \u003carthur@aheymans.xyz\u003e\n"
    }
  ]
}