)]}'
{
  "log": [
    {
      "commit": "247adf39f6172aace09aef819c245d92263a86f4",
      "tree": "e1d886b8030deaa9222a4f165fb3ac914a3d6a23",
      "parents": [
        "0923b795fe51df4431061fa8b44d975aa8027f52"
      ],
      "author": {
        "name": "Nico Huber",
        "email": "nico.huber@secunet.com",
        "time": "Mon Jun 12 14:39:11 2017 +0200"
      },
      "committer": {
        "name": "Nico Huber",
        "email": "nico.h@gmx.de",
        "time": "Tue Jul 25 20:15:32 2017 +0000"
      },
      "message": "gma hsw+: Add default value for HDMI buffer levels\n\nAdd a configuration option to override the default HDMI translation.\nIt\u0027s not exported yet, as we\u0027ve never seen a non-default value being\nused. So this is just to have a common place for the defaults.\n\nAlso sets the recommended default value for Broxton as defined in the\nPRM.\n\nChange-Id: I59fae0fb4f444d9193a98b6a0edf337ecbba3b62\nSigned-off-by: Nico Huber \u003cnico.huber@secunet.com\u003e\nReviewed-on: https://review.coreboot.org/20165\nTested-by: Nico Huber \u003cnico.h@gmx.de\u003e\nReviewed-by: Stefan Reinauer \u003cstefan.reinauer@coreboot.org\u003e\n"
    },
    {
      "commit": "21da5741378af7c9f8db23b55aa316a905ae9183",
      "tree": "64d43912915ee62a2ff6953dbe7270e2c61acf02",
      "parents": [
        "b83107c60fbabfaf8db02a506fb4693b90363691"
      ],
      "author": {
        "name": "Nico Huber",
        "email": "nico.huber@secunet.com",
        "time": "Fri Jan 20 14:00:53 2017 +0100"
      },
      "committer": {
        "name": "Nico Huber",
        "email": "nico.h@gmx.de",
        "time": "Sat Jun 03 15:19:33 2017 +0200"
      },
      "message": "gma: Add config plus stubs for Broxton SoC\n\nCurrent plan is to support all DDI outputs of Apollo Lake. This\nincludes one eDP (DDI A) and two fully fledged DDIs (B, C) that can\nbe either configured to DP 1.2 or HDMI 1.4. MIPI/DSI outputs won\u0027t\nbe supported for now.\n\nSince there doesn\u0027t exist any public documentation, the code will be\nsolely based on analysis of Linux\u0027 i915 driver.\n\nEverything is a stub. In the existing code, at least DDI configu-\nration will also have to be adapted.\n\nv2: Escape hash characters in config file\n\nChange-Id: I4a79d4531d238049ba00ab4f03e270e6b58f81ab\nSigned-off-by: Nico Huber \u003cnico.huber@secunet.com\u003e\nReviewed-on: https://review.coreboot.org/18421\nTested-by: Nico Huber \u003cnico.h@gmx.de\u003e\nReviewed-by: Arthur Heymans \u003carthur@aheymans.xyz\u003e\n"
    },
    {
      "commit": "33912aa2a409416451e5e2d8eee05dc17212004d",
      "tree": "5e94fc767cefb263821ed57e4cc406846c0fceac",
      "parents": [
        "f3e23668c6e2f0179d8c6dc81e7ba23e8a5e9869"
      ],
      "author": {
        "name": "Nico Huber",
        "email": "nico.huber@secunet.com",
        "time": "Tue Dec 06 20:36:23 2016 +0100"
      },
      "committer": {
        "name": "Nico Huber",
        "email": "nico.h@gmx.de",
        "time": "Tue Feb 14 12:51:29 2017 +0100"
      },
      "message": "gma: Move Legacy_VGA_Off() into Pipe_Setup\n\nIt\u0027s about the VGA plane and thus belongs into Pipe_Setup.\n\nChange-Id: I2f59b027c47c06b01f36695c517ed0847617a472\nSigned-off-by: Nico Huber \u003cnico.huber@secunet.com\u003e\nReviewed-on: https://review.coreboot.org/17762\nTested-by: Nico Huber \u003cnico.h@gmx.de\u003e\nReviewed-by: Patrick Georgi \u003cpgeorgi@google.com\u003e\n"
    },
    {
      "commit": "793a8d49affaaba2a3ef725fd0202ebaff37c888",
      "tree": "067ca410826c1ee29e501559d0dcf5c6d570f696",
      "parents": [
        "6a4dfc89a75a492fde715d2062c3ee438357c945"
      ],
      "author": {
        "name": "Nico Huber",
        "email": "nico.h@gmx.de",
        "time": "Mon Nov 21 18:57:03 2016 +0100"
      },
      "committer": {
        "name": "Nico Huber",
        "email": "nico.h@gmx.de",
        "time": "Sun Jan 08 17:06:58 2017 +0100"
      },
      "message": "gma: Make cleaning the hardware state optional\n\nIn Initialize(), the state of the graphics hardware is reset to a\nknown state (i.e. everything is turned off first). That\u0027s unnecessary\nin the coreboot case where we just came out of reset. Thus, make the\nstate cleaning optional with a `Clean_State` parameter that defaults\nto `False`.\n\nChange-Id: Ifee6ec9e9876fca8a715684718014917a3e35879\nSigned-off-by: Nico Huber \u003cnico.h@gmx.de\u003e\nReviewed-on: https://review.coreboot.org/17758\nReviewed-by: Paul Menzel \u003cpaulepanter@users.sourceforge.net\u003e\nReviewed-by: Ronald G. Minnich \u003crminnich@gmail.com\u003e\n"
    },
    {
      "commit": "8c45bcfc4d024c866e4c2b92b1768b413ec8be9c",
      "tree": "dfcfa082dcf1ab6dc31ccf9a50a9ed4a08c8539c",
      "parents": [
        "3c544eeb50590b2bbc69f04725b279ec96a4b2fa"
      ],
      "author": {
        "name": "Nico Huber",
        "email": "nico.h@gmx.de",
        "time": "Sun Nov 20 17:30:57 2016 +0100"
      },
      "committer": {
        "name": "Nico Huber",
        "email": "nico.h@gmx.de",
        "time": "Sun Jan 01 17:36:07 2017 +0100"
      },
      "message": "gma: Split out config derivation and port probing\n\nThe GMA package has grown way too big. Move derivation of the internal\nconfiguration into new package `Config_Helpers`, EDID probing into new\npackage `Display_Probing`.\n\nChange-Id: Ib49ac7b00367be4295d18dba3afd1a0692e0497f\nSigned-off-by: Nico Huber \u003cnico.h@gmx.de\u003e\nReviewed-on: https://review.coreboot.org/17757\nReviewed-by: Adrian-Ken Rueegsegger \u003cken@codelabs.ch\u003e\n"
    },
    {
      "commit": "dca242dbb76fea44ba4bcbf7e4eb15a6c9174679",
      "tree": "311cafdc02fb6d78ebb1a3fe2bc8894a85df1720",
      "parents": [
        "0d454cde12f33a67528c1343bfda7e37b37e7559"
      ],
      "author": {
        "name": "Nico Huber",
        "email": "nico.h@gmx.de",
        "time": "Sun Nov 20 01:53:40 2016 +0100"
      },
      "committer": {
        "name": "Nico Huber",
        "email": "nico.h@gmx.de",
        "time": "Tue Dec 13 22:58:36 2016 +0100"
      },
      "message": "gma: Drop Auto_Configure()\n\nThis procedure was never used to its full extent, afaict. It does too\nmuch and that\u0027s barely tested. New code should be based on Scan_Ports().\n\nChange-Id: I2367488f4b906a03a226313a41bf3d5f8dc4e6ef\nSigned-off-by: Nico Huber \u003cnico.h@gmx.de\u003e\nReviewed-on: https://review.coreboot.org/17751\nReviewed-by: Reto Buerki \u003creet@codelabs.ch\u003e\n"
    },
    {
      "commit": "0d454cde12f33a67528c1343bfda7e37b37e7559",
      "tree": "60e8b70525f9bb4770e4129b8112bcc78c89a485",
      "parents": [
        "99f10f30d15c287ed8e27159a1a4350a1228bc51"
      ],
      "author": {
        "name": "Nico Huber",
        "email": "nico.h@gmx.de",
        "time": "Mon Nov 21 13:33:43 2016 +0100"
      },
      "committer": {
        "name": "Nico Huber",
        "email": "nico.h@gmx.de",
        "time": "Tue Dec 13 22:58:07 2016 +0100"
      },
      "message": "gma: Rename ports Digital[123] \u003d\u003e HDMI[123]\n\nBefore we had DP support, Digital just meant HDMI or DVI, but now it\u0027s\npretty confusing. Rename them to HDMI as it supersedes DVI.\n\nChange-Id: Ie8b4c60ac60040aa5c725ffc9cd06aa164391756\nSigned-off-by: Nico Huber \u003cnico.h@gmx.de\u003e\nReviewed-on: https://review.coreboot.org/17750\nReviewed-by: Reto Buerki \u003creet@codelabs.ch\u003e\n"
    },
    {
      "commit": "99f10f30d15c287ed8e27159a1a4350a1228bc51",
      "tree": "e1831c8087faec3cc34cd82f54ba01f23d6d5dfd",
      "parents": [
        "43cf8d5b120bda9a3ecbec5dd4cfa479818d32b6"
      ],
      "author": {
        "name": "Nico Huber",
        "email": "nico.h@gmx.de",
        "time": "Sun Nov 20 00:34:05 2016 +0100"
      },
      "committer": {
        "name": "Nico Huber",
        "email": "nico.h@gmx.de",
        "time": "Tue Dec 13 22:57:51 2016 +0100"
      },
      "message": "gma: Rename Config_Type \u003d\u003e Pipe_Config\n\nThis was long overdue. Originally, we only had one type of `confi-\nguration` but those times are over. Thus, rename `Config_Type` to\n`Pipe_Config` along with `Configs_Type` to `Pipe_Configs` and\n`Config_Index` to `Pipe_Index` to give them more meaningful names.\n\nChange-Id: Ic02c738f51b01a883e05eff1c94f9c2d6058fdc4\nSigned-off-by: Nico Huber \u003cnico.h@gmx.de\u003e\nReviewed-on: https://review.coreboot.org/17749\nReviewed-by: Reto Buerki \u003creet@codelabs.ch\u003e\n"
    },
    {
      "commit": "aa91bb52025338ced775360130b77b8b312e0516",
      "tree": "41e605323b8a9d9ef7c6a7515659373cbda7dc93",
      "parents": [
        "74ec962821b6151d8fec6639c07080a552d2ffc7"
      ],
      "author": {
        "name": "Nico Huber",
        "email": "nico.huber@secunet.com",
        "time": "Mon Nov 07 12:51:20 2016 +0100"
      },
      "committer": {
        "name": "Nico Huber",
        "email": "nico.h@gmx.de",
        "time": "Wed Dec 07 15:40:56 2016 +0100"
      },
      "message": "gma: Add parameter to Scan_Ports to limit number of pipes\n\nIn some configurations (e.g. textmode) we know that we\u0027ll only enable\na limited number of pipes. So let\u0027s skip additional port probing in\nScan_Ports() that would only waste time otherwise.\n\nChange-Id: I496e84cfe8bb170a6b500f64461db4c837c439fd\nSigned-off-by: Nico Huber \u003cnico.huber@secunet.com\u003e\nReviewed-on: https://review.coreboot.org/17278\nTested-by: Nico Huber \u003cnico.h@gmx.de\u003e\nReviewed-by: Stefan Reinauer \u003cstefan.reinauer@coreboot.org\u003e\n"
    },
    {
      "commit": "3675db58aa729bfb565b61389d3b2568360095af",
      "tree": "1908d586caf388165f18ba7eeef31a13c1e8d1da",
      "parents": [
        "4916e34ddfc7c48b78ed7ac81fe7063287504cd2"
      ],
      "author": {
        "name": "Nico Huber",
        "email": "nico.huber@secunet.com",
        "time": "Fri Nov 04 16:27:29 2016 +0100"
      },
      "committer": {
        "name": "Nico Huber",
        "email": "nico.h@gmx.de",
        "time": "Mon Dec 05 12:34:27 2016 +0100"
      },
      "message": "gma: Add option for VGA plane on the primary pipe\n\nAdd special VGA_PLANE_FRAMEBUFFER_OFFSET that, if set on the primary\npipe, toggles the use of the legacy VGA plane instead of the `hires`\nplane.\n\nThe caller is responsible for the configuration of the VGA plane and\nhas to specify the framebuffer width and height accordingly.\n\nChange-Id: I9f678fe033d835c9183fbb2d2b05b6585eb545ca\nSigned-off-by: Nico Huber \u003cnico.huber@secunet.com\u003e\nReviewed-on: https://review.coreboot.org/17276\nTested-by: Nico Huber \u003cnico.h@gmx.de\u003e\nReviewed-by: Ronald G. Minnich \u003crminnich@gmail.com\u003e\n"
    },
    {
      "commit": "393aa8a8b62455d69651122d1aa3dacc21dd750c",
      "tree": "88b06915c9a42a3c7a85682620ad3647a625aa8d",
      "parents": [
        "abe3de257c482ebeb90cf9f93d69ae744c60f9a6"
      ],
      "author": {
        "name": "Nico Huber",
        "email": "nico.huber@secunet.com",
        "time": "Fri Oct 21 14:18:53 2016 +0200"
      },
      "committer": {
        "name": "Nico Huber",
        "email": "nico.h@gmx.de",
        "time": "Sat Oct 29 01:24:23 2016 +0200"
      },
      "message": "gma edid: Check expected display type\n\nCheck that the EDID\u0027s digital-input bit matches the expected display\ntype (i.e. it should only be set for non-VGA displays).\n\nChange-Id: I099112f190f866525e882d5e24a428092d4d8331\nSigned-off-by: Nico Huber \u003cnico.huber@secunet.com\u003e\nReviewed-on: https://review.coreboot.org/17085\nTested-by: Nico Huber \u003cnico.h@gmx.de\u003e\nReviewed-by: Stefan Reinauer \u003cstefan.reinauer@coreboot.org\u003e\n"
    },
    {
      "commit": "125a29e84242900a5556e8a068227e59420c3e1c",
      "tree": "925c85a1e9a5dc0506c9ccd26cd8ba4e05dd3d33",
      "parents": [
        "be4eaddc67ee3a11b1222db049cd8830491363d9"
      ],
      "author": {
        "name": "Nico Huber",
        "email": "nico.huber@secunet.com",
        "time": "Tue Oct 18 00:23:54 2016 +0200"
      },
      "committer": {
        "name": "Nico Huber",
        "email": "nico.h@gmx.de",
        "time": "Thu Oct 20 13:05:15 2016 +0200"
      },
      "message": "Relicense libgfxinit under GPL v2+\n\nChange-Id: I5d683dda83d23e89955a4d840b5570bd8642834a\nSigned-off-by: Nico Huber \u003cnico.huber@secunet.com\u003e\nReviewed-on: https://review.coreboot.org/17052\nReviewed-by: Paul Menzel \u003cpaulepanter@users.sourceforge.net\u003e\nReviewed-by: Stefan Reinauer \u003cstefan.reinauer@coreboot.org\u003e\nTested-by: Nico Huber \u003cnico.h@gmx.de\u003e\nReviewed-by: Patrick Georgi \u003cpgeorgi@google.com\u003e\n"
    },
    {
      "commit": "83693c8d7d87f5cebe120abdf25951c9e212b319",
      "tree": "249eff589087c2ed8deeeeda1710ff49a3c3c810",
      "parents": [],
      "author": {
        "name": "Nico Huber",
        "email": "nico.huber@secunet.com",
        "time": "Sat Oct 08 22:17:55 2016 +0200"
      },
      "committer": {
        "name": "Nico Huber",
        "email": "nico.h@gmx.de",
        "time": "Sun Oct 09 11:34:25 2016 +0200"
      },
      "message": "Initial upstream commit\n\nThe history contained unlicensed code so everything got squashed, sorry.\n\nChange-Id: I9f5775208f9df6fb29074bf3bc498f68cb17b3a0\nSigned-off-by: Nico Huber \u003cnico.huber@secunet.com\u003e\n"
    }
  ]
}