)]}'
{
  "log": [
    {
      "commit": "b03c8f19ae0d7e1f9f27ff258e72a37dfb87f323",
      "tree": "4406950a9497d0683687521c760430a02d907663",
      "parents": [
        "51375ad75a99d395f3843e46783c0743b5fea29b"
      ],
      "author": {
        "name": "Nico Huber",
        "email": "nico.huber@secunet.com",
        "time": "Fri Aug 25 13:29:08 2017 +0200"
      },
      "committer": {
        "name": "Nico Huber",
        "email": "nico.h@gmx.de",
        "time": "Tue Dec 12 14:25:56 2017 +0000"
      },
      "message": "gma registers: Add procedures to set fence registers\n\nThrough fence registers, we can tell the hardware which parts of the\naperture cover tiled framebuffers. Only legacy X and Y tiling is sup-\nported. According to `i915_reg.h` there are 16 fence registers from\nG4x on and 32 from Ivy Bridge on (this only partially matches docu-\nmentation: Haswell has 16 regs documented and the fence registers\nwere not documented at all before).\n\nChange-Id: I02edc99b315e24dc175c6f93aff627e59cb1ff0b\nSigned-off-by: Nico Huber \u003cnico.huber@secunet.com\u003e\nReviewed-on: https://review.coreboot.org/22708\nReviewed-by: Nico Huber \u003cnico.h@gmx.de\u003e\nTested-by: Nico Huber \u003cnico.h@gmx.de\u003e\n"
    },
    {
      "commit": "e7ac6ebddc771fb7262c5f15decd617deea1bb50",
      "tree": "5a2eb830a9a1c57677210f0665d50ea9a7e66dca",
      "parents": [
        "208857d393022e9a5b314f7e7ce21b7d40546c44"
      ],
      "author": {
        "name": "Nico Huber",
        "email": "nico.h@gmx.de",
        "time": "Mon Sep 04 23:54:13 2017 +0200"
      },
      "committer": {
        "name": "Nico Huber",
        "email": "nico.h@gmx.de",
        "time": "Tue Dec 12 14:03:22 2017 +0000"
      },
      "message": "gma: Implement PCI Id based generation check\n\nWe were used to sanity check the GPU generation by the audio id because\nthat was easily accessible in MMIO space and only one number per gene-\nration. It doesn\u0027t work on Skylake, though, so we read PCI ids instead.\n\nChange-Id: Id6c9cfdb00664dc2c36b2cbd13136568829297d5\nSigned-off-by: Nico Huber \u003cnico.h@gmx.de\u003e\nReviewed-on: https://review.coreboot.org/21394\nReviewed-by: Paul Menzel \u003cpaulepanter@users.sourceforge.net\u003e\nReviewed-by: Stefan Reinauer \u003cstefan.reinauer@coreboot.org\u003e\nTested-by: Stefan Reinauer \u003cstefan.reinauer@coreboot.org\u003e\n"
    },
    {
      "commit": "208857d393022e9a5b314f7e7ce21b7d40546c44",
      "tree": "2cd1eb59cf6cd9468c74efdd23bf14c740a8b993",
      "parents": [
        "907e4157aab4b0fb078e2a81ca9f21fade4ba257"
      ],
      "author": {
        "name": "Nico Huber",
        "email": "nico.h@gmx.de",
        "time": "Sat Jul 29 21:30:24 2017 +0200"
      },
      "committer": {
        "name": "Nico Huber",
        "email": "nico.h@gmx.de",
        "time": "Tue Dec 12 13:59:24 2017 +0000"
      },
      "message": "gma hsw+: Treat DDI E and PCH DAC disabling separately\n\nWe only use DDI E for analog VGA outputs through the PCH DAC. DDI E\nmight be configured differently, though, by a previously running dri-\nver, so we have to treat the two entities seperately on the All_Off()\npath.\n\nChange-Id: I603ecd29c48af43bc21acaadbedaeae451acbcf3\nSigned-off-by: Nico Huber \u003cnico.h@gmx.de\u003e\nReviewed-on: https://review.coreboot.org/20822\nReviewed-by: Stefan Reinauer \u003cstefan.reinauer@coreboot.org\u003e\n"
    },
    {
      "commit": "907e4157aab4b0fb078e2a81ca9f21fade4ba257",
      "tree": "8e0a627f6eeb243aaf1c40c3fa82f709bd786d16",
      "parents": [
        "19729a747bb78d4e5d4babfc6b9680b2ec0e5bb2"
      ],
      "author": {
        "name": "Nico Huber",
        "email": "nico.h@gmx.de",
        "time": "Sat Jul 29 21:18:59 2017 +0200"
      },
      "committer": {
        "name": "Nico Huber",
        "email": "nico.h@gmx.de",
        "time": "Tue Dec 12 13:55:14 2017 +0000"
      },
      "message": "gma hsw+: Don\u0027t use DDI E if DDI A uses all lanes\n\nDDI E shares its two lanes with DDI A. If DDI A is configured to use\nall four lanes, DDI E is disabled. As DDI E is the only DDI that can\nbe configured in FDI mode to feed the PCH DAC, treat `Analog` as in-\nvalid in this configuration.\n\nChange-Id: I94e9537c9f30d0cbf757b816f38d44e1b43805b3\nSigned-off-by: Nico Huber \u003cnico.h@gmx.de\u003e\nReviewed-on: https://review.coreboot.org/20821\nReviewed-by: Stefan Reinauer \u003cstefan.reinauer@coreboot.org\u003e\n"
    },
    {
      "commit": "19729a747bb78d4e5d4babfc6b9680b2ec0e5bb2",
      "tree": "3963b14b90045460a813fa061f68f0aa3f3a714b",
      "parents": [
        "5fd9a319684f71fa6f4dcb77ce8bc9337f5695b7"
      ],
      "author": {
        "name": "Nico Huber",
        "email": "nico.h@gmx.de",
        "time": "Sun Jul 30 01:05:05 2017 +0200"
      },
      "committer": {
        "name": "Nico Huber",
        "email": "nico.h@gmx.de",
        "time": "Tue Dec 12 13:54:25 2017 +0000"
      },
      "message": "gma hsw+: Revise Has_DDI_D flag\n\nThe GFX Programmer\u0027s Reference Manuals (PRMs) aren\u0027t clear on this but\nit\u0027s pretty clear from the processor datasheets which SKUs expose which\npins: All U/Y processors lack DDI D.\n\nChange-Id: I84c40b6bc01091de8a512e21354243c74643e0f5\nSigned-off-by: Nico Huber \u003cnico.h@gmx.de\u003e\nReviewed-on: https://review.coreboot.org/20820\nReviewed-by: Paul Menzel \u003cpaulepanter@users.sourceforge.net\u003e\nReviewed-by: Stefan Reinauer \u003cstefan.reinauer@coreboot.org\u003e\n"
    },
    {
      "commit": "1bc496fc832cde66cad36d299cb4f193775a26a4",
      "tree": "68777156972175b157b5fe279ac26ac03b24ac41",
      "parents": [
        "c3f66f635352be8f49da55f2727a6fc3093d7e62"
      ],
      "author": {
        "name": "Nico Huber",
        "email": "nico.h@gmx.de",
        "time": "Fri Jun 09 22:23:28 2017 +0200"
      },
      "committer": {
        "name": "Nico Huber",
        "email": "nico.h@gmx.de",
        "time": "Mon Aug 28 20:12:45 2017 +0000"
      },
      "message": "gma-display_probing: Only check display type on DVI-I\n\nOn DVI-I connectors the DDC is shared between the analog and digital\nparts. To decide which path to take we checked the digital input bit\nof the EDID. We did this overeagerly for all ports, which broke com-\npatibility with DP adapters (the DP realm is very complex and we are\nsupposed to discover the whole downstream hierarchie, which obviously\nwould be overkill).\n\nChange-Id: Ifc53e8ab985695e6e4ff1d42659826710a50eae9\nSigned-off-by: Nico Huber \u003cnico.h@gmx.de\u003e\nReviewed-on: https://review.coreboot.org/20135\nReviewed-by: Arthur Heymans \u003carthur@aheymans.xyz\u003e\nReviewed-by: Felix Held \u003cfelix-coreboot@felixheld.de\u003e\n"
    },
    {
      "commit": "2b6f6992188460bbb10ce2838a981ddc37141755",
      "tree": "e744d7d06e1414a4d089fd6f7c2849ea15286045",
      "parents": [
        "b8ae61876b8ddbf788f2168c87c8fce8dbaad0e3"
      ],
      "author": {
        "name": "Nico Huber",
        "email": "nico.h@gmx.de",
        "time": "Sun Jul 09 18:11:34 2017 +0200"
      },
      "committer": {
        "name": "Nico Huber",
        "email": "nico.h@gmx.de",
        "time": "Mon Aug 21 10:56:15 2017 +0000"
      },
      "message": "gma: Add a HW.PCI.Dev for dynamic MMIO setup\n\nRemove `MMIO_Base` option from Initialize() and try to derive it\nusing libhwbase\u0027 PCI mechanism instead.\n\nChange-Id: Iacd4d098954bb96c1c6b40fdfb2636191d9517c7\nSigned-off-by: Nico Huber \u003cnico.h@gmx.de\u003e\nReviewed-on: https://review.coreboot.org/20600\nReviewed-by: Arthur Heymans \u003carthur@aheymans.xyz\u003e\n"
    },
    {
      "commit": "b8ae61876b8ddbf788f2168c87c8fce8dbaad0e3",
      "tree": "44a2d4bce1cb8d7bd1fafdf90e048d47eac6e8a6",
      "parents": [
        "fda2d6eaef548a193cc70fc2c2dd0dbeb649951e"
      ],
      "author": {
        "name": "Nico Huber",
        "email": "nico.h@gmx.de",
        "time": "Sat Jul 15 20:03:56 2017 +0200"
      },
      "committer": {
        "name": "Nico Huber",
        "email": "nico.h@gmx.de",
        "time": "Mon Aug 21 10:54:09 2017 +0000"
      },
      "message": "gma: Move GTT constants into GMA.Config\n\nChange-Id: Ie4b017f26b658c1818f90701089ce5d3171e4953\nSigned-off-by: Nico Huber \u003cnico.h@gmx.de\u003e\nReviewed-on: https://review.coreboot.org/20599\nReviewed-by: Paul Menzel \u003cpaulepanter@users.sourceforge.net\u003e\nReviewed-by: Arthur Heymans \u003carthur@aheymans.xyz\u003e\n"
    },
    {
      "commit": "58afc202b1b29898f68f239ec7e50ac532b5d46c",
      "tree": "bce198ed9feb3b08fdb1412531e0867c139976ad",
      "parents": [
        "18ff0c13b740f4153f39dfeb5b9af474bfa13e0a"
      ],
      "author": {
        "name": "Nico Huber",
        "email": "nico.huber@secunet.com",
        "time": "Mon Jun 12 21:34:55 2017 +0200"
      },
      "committer": {
        "name": "Nico Huber",
        "email": "nico.h@gmx.de",
        "time": "Tue Jul 25 20:23:59 2017 +0000"
      },
      "message": "gma skl: Add I_boost configuration\n\nHardcoded to 1 since we don\u0027t support Skylake-Y (ULX).\n\nChange-Id: I22fa056531cac18828c867f9c9f5745ec424d38c\nSigned-off-by: Nico Huber \u003cnico.huber@secunet.com\u003e\nReviewed-on: https://review.coreboot.org/20168\nTested-by: Nico Huber \u003cnico.h@gmx.de\u003e\nReviewed-by: Stefan Reinauer \u003cstefan.reinauer@coreboot.org\u003e\n"
    },
    {
      "commit": "18ff0c13b740f4153f39dfeb5b9af474bfa13e0a",
      "tree": "6dee0d9f2256d54af9e317f8bafef835eb2b1d10",
      "parents": [
        "730f17c6abf9be8b43734dbfabe90256d479fecb"
      ],
      "author": {
        "name": "Nico Huber",
        "email": "nico.huber@secunet.com",
        "time": "Mon Jun 12 15:41:31 2017 +0200"
      },
      "committer": {
        "name": "Nico Huber",
        "email": "nico.h@gmx.de",
        "time": "Tue Jul 25 20:23:19 2017 +0000"
      },
      "message": "gma skl: Add DDI buffer translations\n\nChange-Id: Ibb058de78f671b94ee788f30342184a8c31a1154\nSigned-off-by: Nico Huber \u003cnico.huber@secunet.com\u003e\nReviewed-on: https://review.coreboot.org/20167\nTested-by: Nico Huber \u003cnico.h@gmx.de\u003e\nReviewed-by: Stefan Reinauer \u003cstefan.reinauer@coreboot.org\u003e\n"
    },
    {
      "commit": "730f17c6abf9be8b43734dbfabe90256d479fecb",
      "tree": "785a5838e616535e58743d977745733addea6aed",
      "parents": [
        "01b680ff020b1bcc9e5d8a864affd47bac75488b"
      ],
      "author": {
        "name": "Nico Huber",
        "email": "nico.huber@secunet.com",
        "time": "Mon Jun 12 15:51:25 2017 +0200"
      },
      "committer": {
        "name": "Nico Huber",
        "email": "nico.h@gmx.de",
        "time": "Tue Jul 25 20:21:27 2017 +0000"
      },
      "message": "gma hsw bdw: Add DDI buffer translations\n\nChange-Id: Ib87be86e2853e6b9df7e19dd9cb80d4f7effefc5\nSigned-off-by: Nico Huber \u003cnico.huber@secunet.com\u003e\nReviewed-on: https://review.coreboot.org/20166\nTested-by: Nico Huber \u003cnico.h@gmx.de\u003e\nReviewed-by: Stefan Reinauer \u003cstefan.reinauer@coreboot.org\u003e\n"
    },
    {
      "commit": "01b680ff020b1bcc9e5d8a864affd47bac75488b",
      "tree": "7800b9c5ed6c760e2f7f81335b17b94c66d9e09f",
      "parents": [
        "247adf39f6172aace09aef819c245d92263a86f4"
      ],
      "author": {
        "name": "Nico Huber",
        "email": "nico.huber@secunet.com",
        "time": "Fri Jun 09 16:24:22 2017 +0200"
      },
      "committer": {
        "name": "Nico Huber",
        "email": "nico.h@gmx.de",
        "time": "Tue Jul 25 20:20:27 2017 +0000"
      },
      "message": "gma hsw+: Add boilerplate for DDI buffer translations\n\nChange-Id: I8fcba64a3c663b9eea7fb11088c62ea584d63e04\nSigned-off-by: Nico Huber \u003cnico.huber@secunet.com\u003e\nReviewed-on: https://review.coreboot.org/20129\nTested-by: Nico Huber \u003cnico.h@gmx.de\u003e\nReviewed-by: Stefan Reinauer \u003cstefan.reinauer@coreboot.org\u003e\n"
    },
    {
      "commit": "247adf39f6172aace09aef819c245d92263a86f4",
      "tree": "e1d886b8030deaa9222a4f165fb3ac914a3d6a23",
      "parents": [
        "0923b795fe51df4431061fa8b44d975aa8027f52"
      ],
      "author": {
        "name": "Nico Huber",
        "email": "nico.huber@secunet.com",
        "time": "Mon Jun 12 14:39:11 2017 +0200"
      },
      "committer": {
        "name": "Nico Huber",
        "email": "nico.h@gmx.de",
        "time": "Tue Jul 25 20:15:32 2017 +0000"
      },
      "message": "gma hsw+: Add default value for HDMI buffer levels\n\nAdd a configuration option to override the default HDMI translation.\nIt\u0027s not exported yet, as we\u0027ve never seen a non-default value being\nused. So this is just to have a common place for the defaults.\n\nAlso sets the recommended default value for Broxton as defined in the\nPRM.\n\nChange-Id: I59fae0fb4f444d9193a98b6a0edf337ecbba3b62\nSigned-off-by: Nico Huber \u003cnico.huber@secunet.com\u003e\nReviewed-on: https://review.coreboot.org/20165\nTested-by: Nico Huber \u003cnico.h@gmx.de\u003e\nReviewed-by: Stefan Reinauer \u003cstefan.reinauer@coreboot.org\u003e\n"
    },
    {
      "commit": "1c3b9285ceb3ff7bbb6dab8d9805ca3bda9d0ff3",
      "tree": "78a2fe0e2c18db7ad8bfd5bd81bee78ddb2f661a",
      "parents": [
        "fdd93659e03396051940988de328f28cdb7d448c"
      ],
      "author": {
        "name": "Nico Huber",
        "email": "nico.huber@secunet.com",
        "time": "Thu Feb 09 13:57:04 2017 +0100"
      },
      "committer": {
        "name": "Nico Huber",
        "email": "nico.h@gmx.de",
        "time": "Sat Jun 03 15:24:28 2017 +0200"
      },
      "message": "gma broxton: Add final glue\n\nAdd new configuration flags for Broxton and hook up its DDI_Phy\nimplementation in the shared Haswell DDI code. Haswell and Skylake\nget DDI_Phy stubs.\n\nTested (in Linux userspace) on ASRock J3455-ITX which exposes the\nfollowing ports:\n  o VGA through an active eDP to VGA converter chip\n  o HDMI 2.0 through an active DP to HDMI converter chip\n  o DVI-D connected to the SoC\n\nChange-Id: If72b228c6a4c45487261e6e7435d281ec2d97f38\nSigned-off-by: Nico Huber \u003cnico.huber@secunet.com\u003e\nReviewed-on: https://review.coreboot.org/18426\nTested-by: Nico Huber \u003cnico.h@gmx.de\u003e\nReviewed-by: Arthur Heymans \u003carthur@aheymans.xyz\u003e\n"
    },
    {
      "commit": "21da5741378af7c9f8db23b55aa316a905ae9183",
      "tree": "64d43912915ee62a2ff6953dbe7270e2c61acf02",
      "parents": [
        "b83107c60fbabfaf8db02a506fb4693b90363691"
      ],
      "author": {
        "name": "Nico Huber",
        "email": "nico.huber@secunet.com",
        "time": "Fri Jan 20 14:00:53 2017 +0100"
      },
      "committer": {
        "name": "Nico Huber",
        "email": "nico.h@gmx.de",
        "time": "Sat Jun 03 15:19:33 2017 +0200"
      },
      "message": "gma: Add config plus stubs for Broxton SoC\n\nCurrent plan is to support all DDI outputs of Apollo Lake. This\nincludes one eDP (DDI A) and two fully fledged DDIs (B, C) that can\nbe either configured to DP 1.2 or HDMI 1.4. MIPI/DSI outputs won\u0027t\nbe supported for now.\n\nSince there doesn\u0027t exist any public documentation, the code will be\nsolely based on analysis of Linux\u0027 i915 driver.\n\nEverything is a stub. In the existing code, at least DDI configu-\nration will also have to be adapted.\n\nv2: Escape hash characters in config file\n\nChange-Id: I4a79d4531d238049ba00ab4f03e270e6b58f81ab\nSigned-off-by: Nico Huber \u003cnico.huber@secunet.com\u003e\nReviewed-on: https://review.coreboot.org/18421\nTested-by: Nico Huber \u003cnico.h@gmx.de\u003e\nReviewed-by: Arthur Heymans \u003carthur@aheymans.xyz\u003e\n"
    },
    {
      "commit": "ac455ad15a7acfec0ae1e1046fe10aa28358d6a5",
      "tree": "35e13c7864a7472221d1c3c72bda06d37c31bff2",
      "parents": [
        "bcb2c47c5120ed32d8d9a42990acc3f16f202ad9"
      ],
      "author": {
        "name": "Nico Huber",
        "email": "nico.huber@secunet.com",
        "time": "Tue Feb 14 14:41:19 2017 +0100"
      },
      "committer": {
        "name": "Nico Huber",
        "email": "nico.h@gmx.de",
        "time": "Tue Mar 14 11:55:01 2017 +0100"
      },
      "message": "gma ddi: Don\u0027t try to disable non-existent DDI D\n\nDidn\u0027t hurt on Haswell-/Broadwell-U, but did lock up Broxton.\n\nChange-Id: I6a47d0fba8cb6e59d8ace1ab64eed6182769a37b\nSigned-off-by: Nico Huber \u003cnico.huber@secunet.com\u003e\nReviewed-on: https://review.coreboot.org/18420\nTested-by: Nico Huber \u003cnico.h@gmx.de\u003e\nReviewed-by: Arthur Heymans \u003carthur@aheymans.xyz\u003e\n"
    },
    {
      "commit": "7ad2d6569640f2f18b736fbf372ffb9aea5bed27",
      "tree": "9d107b97b846924b40f7e202de1ff1a17b8d99a8",
      "parents": [
        "113a14bd5a3e96225c1717a09a578a434385592e"
      ],
      "author": {
        "name": "Nico Huber",
        "email": "nico.huber@secunet.com",
        "time": "Wed Dec 07 15:19:32 2016 +0100"
      },
      "committer": {
        "name": "Nico Huber",
        "email": "nico.h@gmx.de",
        "time": "Mon Mar 06 14:57:21 2017 +0100"
      },
      "message": "gma: Move transcoder setup into own package\n\nSplit the transcoder setup out of `Pipe_Setup` into a new package\n`Transcoder`. This comes closer to how Intel\u0027s manuals describe the\nhardware.\n\nAlso rework the related constant definitions to make things more\nhuman readable.\n\nChange-Id: Ife0f0d635d87b874d4b713a00ca7a1bec688c672\nSigned-off-by: Nico Huber \u003cnico.huber@secunet.com\u003e\nReviewed-on: https://review.coreboot.org/17764\nTested-by: Nico Huber \u003cnico.h@gmx.de\u003e\nReviewed-by: Arthur Heymans \u003carthur@aheymans.xyz\u003e\nReviewed-by: Patrick Georgi \u003cpgeorgi@google.com\u003e\n"
    },
    {
      "commit": "3c544eeb50590b2bbc69f04725b279ec96a4b2fa",
      "tree": "41da4546fce3638382feef931c4b76fdc4755437",
      "parents": [
        "6b7a40b94ca3b9d77a6cb2d262ed763a6bba3012"
      ],
      "author": {
        "name": "Nico Huber",
        "email": "nico.h@gmx.de",
        "time": "Sun Nov 20 04:56:58 2016 +0100"
      },
      "committer": {
        "name": "Nico Huber",
        "email": "nico.h@gmx.de",
        "time": "Sun Jan 01 17:34:54 2017 +0100"
      },
      "message": "gma: Refactor Port_Config derivation\n\nMostly renaming and some type tightening. Move the call to\nConfigure_FDI_Link() into Fill_Port_Config() as it\u0027s part of the\nPort_Config.\n\nAlso start to document some procedures. The whole high-level con-\nfiguration is driven by non-obvious software-design choices, and\nthus isn\u0027t self-explanatory even if you know the hardware.\n\nChange-Id: Ib6a0893333e9359776140ed9de110f54cf36f6e5\nSigned-off-by: Nico Huber \u003cnico.h@gmx.de\u003e\nReviewed-on: https://review.coreboot.org/17756\nReviewed-by: Adrian-Ken Rueegsegger \u003cken@codelabs.ch\u003e\n"
    },
    {
      "commit": "1b2c9a3a0c0c8dfaa539baf5db1c76ef16c317c9",
      "tree": "835aa42dffc90db437dbb4a1061b3ca794242b45",
      "parents": [
        "995436b6ba33b7682356b06cfa7a034d5adc5cfe"
      ],
      "author": {
        "name": "Nico Huber",
        "email": "nico.h@gmx.de",
        "time": "Sun Nov 20 03:42:08 2016 +0100"
      },
      "committer": {
        "name": "Nico Huber",
        "email": "nico.h@gmx.de",
        "time": "Tue Dec 13 22:58:54 2016 +0100"
      },
      "message": "gma: Refactor Scan_Ports()\n\nFactor the probing of a single port\u0027s EDID out. Not only to save some\nindentation levels but also to make it more flexible for later en-\nhancements.\n\nChange-Id: I063787ac42174a02e83e3d5ed93c033f16d3df7a\nSigned-off-by: Nico Huber \u003cnico.h@gmx.de\u003e\nReviewed-on: https://review.coreboot.org/17753\nReviewed-by: Reto Buerki \u003creet@codelabs.ch\u003e\n"
    },
    {
      "commit": "0d454cde12f33a67528c1343bfda7e37b37e7559",
      "tree": "60e8b70525f9bb4770e4129b8112bcc78c89a485",
      "parents": [
        "99f10f30d15c287ed8e27159a1a4350a1228bc51"
      ],
      "author": {
        "name": "Nico Huber",
        "email": "nico.h@gmx.de",
        "time": "Mon Nov 21 13:33:43 2016 +0100"
      },
      "committer": {
        "name": "Nico Huber",
        "email": "nico.h@gmx.de",
        "time": "Tue Dec 13 22:58:07 2016 +0100"
      },
      "message": "gma: Rename ports Digital[123] \u003d\u003e HDMI[123]\n\nBefore we had DP support, Digital just meant HDMI or DVI, but now it\u0027s\npretty confusing. Rename them to HDMI as it supersedes DVI.\n\nChange-Id: Ie8b4c60ac60040aa5c725ffc9cd06aa164391756\nSigned-off-by: Nico Huber \u003cnico.h@gmx.de\u003e\nReviewed-on: https://review.coreboot.org/17750\nReviewed-by: Reto Buerki \u003creet@codelabs.ch\u003e\n"
    },
    {
      "commit": "99f10f30d15c287ed8e27159a1a4350a1228bc51",
      "tree": "e1831c8087faec3cc34cd82f54ba01f23d6d5dfd",
      "parents": [
        "43cf8d5b120bda9a3ecbec5dd4cfa479818d32b6"
      ],
      "author": {
        "name": "Nico Huber",
        "email": "nico.h@gmx.de",
        "time": "Sun Nov 20 00:34:05 2016 +0100"
      },
      "committer": {
        "name": "Nico Huber",
        "email": "nico.h@gmx.de",
        "time": "Tue Dec 13 22:57:51 2016 +0100"
      },
      "message": "gma: Rename Config_Type \u003d\u003e Pipe_Config\n\nThis was long overdue. Originally, we only had one type of `confi-\nguration` but those times are over. Thus, rename `Config_Type` to\n`Pipe_Config` along with `Configs_Type` to `Pipe_Configs` and\n`Config_Index` to `Pipe_Index` to give them more meaningful names.\n\nChange-Id: Ic02c738f51b01a883e05eff1c94f9c2d6058fdc4\nSigned-off-by: Nico Huber \u003cnico.h@gmx.de\u003e\nReviewed-on: https://review.coreboot.org/17749\nReviewed-by: Reto Buerki \u003creet@codelabs.ch\u003e\n"
    },
    {
      "commit": "74ec962821b6151d8fec6639c07080a552d2ffc7",
      "tree": "2badba75821f2d3dce4ec7661f2d0d15f56380cf",
      "parents": [
        "fbb422015506b6c175ff35d084e5cf267dfc0096"
      ],
      "author": {
        "name": "Nico Huber",
        "email": "nico.h@gmx.de",
        "time": "Sat Nov 19 03:00:43 2016 +0100"
      },
      "committer": {
        "name": "Nico Huber",
        "email": "nico.h@gmx.de",
        "time": "Mon Dec 05 12:38:06 2016 +0100"
      },
      "message": "gma: Limit HDMI pixel rate\n\nGiven that current Intel chips only support 4K@30Hz over HDMI, it\u0027s\nactually no surprise that older chips had even lower limits. For a\n24bpp mode, it\u0027s 225MHz for Nehalem, Sandy and Ivy Bridge and 300MHz\nfor everything newer.\n\nTo keep the code most simple we keep the display\u0027s native resolution\nand just limit the clock if we encouter an unsupported mode.\n\nTEST\u003dBooted T420 with a DELL U3415W attached over DP-to-HDMI and\n     DVI-to-HDMI adapters. The display came up with 3440x1440@42Hz\n     (instead of a garbled picture at 1720x1440@60Hz).\n\nChange-Id: I5386386c648db267a49ed1f62750d2a5fdb2d934\nSigned-off-by: Nico Huber \u003cnico.h@gmx.de\u003e\nReviewed-on: https://review.coreboot.org/17499\nReviewed-by: Arthur Heymans \u003carthur@aheymans.xyz\u003e\nReviewed-by: Paul Menzel \u003cpaulepanter@users.sourceforge.net\u003e\n"
    },
    {
      "commit": "fbb422015506b6c175ff35d084e5cf267dfc0096",
      "tree": "800db7e4028ed730b7c4c10d08e0252062fd5eae",
      "parents": [
        "3675db58aa729bfb565b61389d3b2568360095af"
      ],
      "author": {
        "name": "Nico Huber",
        "email": "nico.huber@secunet.com",
        "time": "Mon Nov 07 15:08:26 2016 +0100"
      },
      "committer": {
        "name": "Nico Huber",
        "email": "nico.h@gmx.de",
        "time": "Mon Dec 05 12:35:25 2016 +0100"
      },
      "message": "gma: Implement Ivy Bridge VGA plane workaround\n\nIt\u0027s a documented requirement, even though it doesn\u0027t seem necessary.\n\nChange-Id: Id4f579c1ca34633ee00c771b39e6ff45cdcfbf69\nSigned-off-by: Nico Huber \u003cnico.huber@secunet.com\u003e\nReviewed-on: https://review.coreboot.org/17277\nTested-by: Nico Huber \u003cnico.h@gmx.de\u003e\nReviewed-by: Ronald G. Minnich \u003crminnich@gmail.com\u003e\n"
    },
    {
      "commit": "4916e34ddfc7c48b78ed7ac81fe7063287504cd2",
      "tree": "1d173567e74bceb55a7904b3cccc0e1cbb535f57",
      "parents": [
        "770fe4a07caa37cca50d32fb4c218ea63607e34c"
      ],
      "author": {
        "name": "Nico Huber",
        "email": "nico.huber@secunet.com",
        "time": "Fri Nov 04 14:37:53 2016 +0100"
      },
      "committer": {
        "name": "Nico Huber",
        "email": "nico.h@gmx.de",
        "time": "Tue Nov 29 23:43:40 2016 +0100"
      },
      "message": "gma: Configure panel fitter / pipe scaler\n\nIf the framebuffer size is smaller than the display mode\u0027s resolution,\nenable the panel fitter or pipe scaler (on Skylake+).\n\nChange-Id: I0a648a7e7bf495a80636a589a74b698ecba7e7d5\nSigned-off-by: Nico Huber \u003cnico.huber@secunet.com\u003e\nReviewed-on: https://review.coreboot.org/17263\nReviewed-by: Arthur Heymans \u003carthur@aheymans.xyz\u003e\nTested-by: Nico Huber \u003cnico.h@gmx.de\u003e\n"
    },
    {
      "commit": "dcd274b28d49570a7fdeace8806af3d17cfd92dd",
      "tree": "df95cee9fa72ef9b66f8db59fc7a7bbde4f1aa05",
      "parents": [
        "c7a4fee02f526fd851ac87acae5862dc7bb34800"
      ],
      "author": {
        "name": "Nico Huber",
        "email": "nico.huber@secunet.com",
        "time": "Thu Nov 03 20:15:39 2016 +0100"
      },
      "committer": {
        "name": "Nico Huber",
        "email": "nico.h@gmx.de",
        "time": "Thu Nov 17 11:21:45 2016 +0100"
      },
      "message": "gma: Validate maximum scalable width\n\nChange-Id: Iba8199a2451e1976ac8aa0f8632d0846fc0caeb4\nSigned-off-by: Nico Huber \u003cnico.huber@secunet.com\u003e\nReviewed-on: https://review.coreboot.org/17261\nTested-by: Nico Huber \u003cnico.h@gmx.de\u003e\nReviewed-by: Martin Roth \u003cmartinroth@google.com\u003e\n"
    },
    {
      "commit": "d55afebf8bc03f87d1a8b8f92144c2f8da6ca0ae",
      "tree": "7703f06d76adeaf58b1fd9c8980716410c92909d",
      "parents": [
        "393aa8a8b62455d69651122d1aa3dacc21dd750c"
      ],
      "author": {
        "name": "Nico Huber",
        "email": "nico.huber@secunet.com",
        "time": "Fri Oct 21 14:31:10 2016 +0200"
      },
      "committer": {
        "name": "Nico Huber",
        "email": "nico.h@gmx.de",
        "time": "Sat Oct 29 01:26:13 2016 +0200"
      },
      "message": "gma i2c: Make I2C port for VGA displays a config option\n\nBoards with a DVI-I connector share the I2C pins for both analog and\ndigital displays. In that case, the EDID for a VGA display has to be\nread over the I2C interface of the coupled digital port.\n\nTEST\u003dBooted kontron/ktqm77 with DVI-I to VGA cable. Display is detected\n     and enabled (but doesn\u0027t show anything, yet?).\n\nChange-Id: I5c4f77d5ad1927f075877a3719361ed2193f4c39\nSigned-off-by: Nico Huber \u003cnico.huber@secunet.com\u003e\nReviewed-on: https://review.coreboot.org/17086\nTested-by: Nico Huber \u003cnico.h@gmx.de\u003e\nReviewed-by: Stefan Reinauer \u003cstefan.reinauer@coreboot.org\u003e\n"
    },
    {
      "commit": "abe3de257c482ebeb90cf9f93d69ae744c60f9a6",
      "tree": "6181e69238840704e1370e005ddca3ee7e1f1d4d",
      "parents": [
        "f54d0962018b0443973f84e525e0d112ce956800"
      ],
      "author": {
        "name": "Nico Huber",
        "email": "nico.huber@secunet.com",
        "time": "Thu Oct 20 15:03:46 2016 +0200"
      },
      "committer": {
        "name": "Nico Huber",
        "email": "nico.h@gmx.de",
        "time": "Sat Oct 29 01:23:09 2016 +0200"
      },
      "message": "gma dp aux: Program 2x bit clock divider\n\nThis setting exists for any platform before Skylake. Some have sane\ndefaults after reset, some don\u0027t. So we always set the correct divisor.\n\nThis makes external DP output work with coreboot on Ivy Bridge.\n\nChange-Id: I91d8030a985cc35c7cf826c0276753137b5d6b77\nSigned-off-by: Nico Huber \u003cnico.huber@secunet.com\u003e\nReviewed-on: https://review.coreboot.org/17072\nTested-by: Nico Huber \u003cnico.h@gmx.de\u003e\nReviewed-by: Arthur Heymans \u003carthur@aheymans.xyz\u003e\n"
    },
    {
      "commit": "f54d0962018b0443973f84e525e0d112ce956800",
      "tree": "80d5b86e918fab1d92d7455eec2c3590c0d354a8",
      "parents": [
        "125a29e84242900a5556e8a068227e59420c3e1c"
      ],
      "author": {
        "name": "Nico Huber",
        "email": "nico.huber@secunet.com",
        "time": "Thu Oct 20 14:17:18 2016 +0200"
      },
      "committer": {
        "name": "Nico Huber",
        "email": "nico.h@gmx.de",
        "time": "Sat Oct 29 01:21:38 2016 +0200"
      },
      "message": "gma: Program PCH_RAWCLK_FREQ register\n\nThis seems to be a scratchpad register to tell later drivers which\nfrequency the platform uses. Linux reads this but never writes the\nregister.\n\nChange-Id: I55af7c7b675da580c7f52d9997262b232019132c\nSigned-off-by: Nico Huber \u003cnico.huber@secunet.com\u003e\nReviewed-on: https://review.coreboot.org/17071\nTested-by: Nico Huber \u003cnico.h@gmx.de\u003e\nReviewed-by: Stefan Reinauer \u003cstefan.reinauer@coreboot.org\u003e\n"
    },
    {
      "commit": "125a29e84242900a5556e8a068227e59420c3e1c",
      "tree": "925c85a1e9a5dc0506c9ccd26cd8ba4e05dd3d33",
      "parents": [
        "be4eaddc67ee3a11b1222db049cd8830491363d9"
      ],
      "author": {
        "name": "Nico Huber",
        "email": "nico.huber@secunet.com",
        "time": "Tue Oct 18 00:23:54 2016 +0200"
      },
      "committer": {
        "name": "Nico Huber",
        "email": "nico.h@gmx.de",
        "time": "Thu Oct 20 13:05:15 2016 +0200"
      },
      "message": "Relicense libgfxinit under GPL v2+\n\nChange-Id: I5d683dda83d23e89955a4d840b5570bd8642834a\nSigned-off-by: Nico Huber \u003cnico.huber@secunet.com\u003e\nReviewed-on: https://review.coreboot.org/17052\nReviewed-by: Paul Menzel \u003cpaulepanter@users.sourceforge.net\u003e\nReviewed-by: Stefan Reinauer \u003cstefan.reinauer@coreboot.org\u003e\nTested-by: Nico Huber \u003cnico.h@gmx.de\u003e\nReviewed-by: Patrick Georgi \u003cpgeorgi@google.com\u003e\n"
    },
    {
      "commit": "83693c8d7d87f5cebe120abdf25951c9e212b319",
      "tree": "249eff589087c2ed8deeeeda1710ff49a3c3c810",
      "parents": [],
      "author": {
        "name": "Nico Huber",
        "email": "nico.huber@secunet.com",
        "time": "Sat Oct 08 22:17:55 2016 +0200"
      },
      "committer": {
        "name": "Nico Huber",
        "email": "nico.h@gmx.de",
        "time": "Sun Oct 09 11:34:25 2016 +0200"
      },
      "message": "Initial upstream commit\n\nThe history contained unlicensed code so everything got squashed, sorry.\n\nChange-Id: I9f5775208f9df6fb29074bf3bc498f68cb17b3a0\nSigned-off-by: Nico Huber \u003cnico.huber@secunet.com\u003e\n"
    }
  ]
}