diff --git a/common/hw-gfx-gma.adb b/common/hw-gfx-gma.adb
index 0a92d1c..fbb5d98 100644
--- a/common/hw-gfx-gma.adb
+++ b/common/hw-gfx-gma.adb
@@ -402,109 +402,6 @@
       Power_And_Clocks.Power_Set_To (Cur_Configs);
    end Scan_Ports;
 
-   procedure Auto_Configure
-     (Configs     : in out Pipe_Configs;
-      Keep_Power  : in     Boolean := False)
-   is
-      Raw_EDID : EDID.Raw_EDID_Data := (others => 16#00#);
-      Success : Boolean;
-
-      Config_Idx : Pipe_Index;
-      Port_Cfg : Port_Config;
-
-      function Free_Config return Boolean
-      with
-         Pre => True
-      is
-      begin
-         return Port_Configured (Configs, Disabled);
-      end Free_Config;
-
-      function First_Free_Config return Pipe_Index
-      with
-         Pre => Free_Config
-      is
-      begin
-         return (if Configs (Primary).Port = Disabled then Primary else
-                 (if Configs (Secondary).Port = Disabled then Secondary
-                  else Tertiary));
-      end First_Free_Config;
-   begin
-      -- TODO: Only check ports with hot-plug event?
-
-      if Config.Has_Internal_Display and then
-         not Keep_Power and then
-         not Port_Configured (Cur_Configs, Internal)
-      then
-         Panel.On (Wait => False);
-      end if;
-
-      -- Check if displays are still connected
-      for I in Pipe_Index loop
-         if Configs (I).Port /= Disabled then
-            Fill_Port_Config (Port_Cfg, Configs, I, Success);
-            if Success then
-               Connector_Info.Read_EDID
-                 (Raw_EDID => Raw_EDID,
-                  Port_Cfg => Port_Cfg,
-                  Success  => Success);
-            end if;
-            if not Success or else
-               not EDID.Has_Preferred_Mode (Raw_EDID) or else
-               Configs (I).Mode /= EDID.Preferred_Mode (Raw_EDID)
-            then
-               Configs (I).Port := Disabled;
-            end if;
-         end if;
-      end loop;
-
-      -- Add new displays as long as there is a free pipe config
-      for Port in Active_Port_Type loop
-         if Free_Config and then not Port_Configured (Configs, Port) then
-            Config_Idx := First_Free_Config;
-            Configs (Config_Idx).Port := Port;
-            Fill_Port_Config (Port_Cfg, Configs, Config_Idx, Success);
-
-            if Success then
-               -- Need power to probe port
-               if not Keep_Power and then To_Display_Type (Port) = DP then
-                  Power_And_Clocks.Power_Up (Cur_Configs, Configs);
-               end if;
-               if not Keep_Power and then Port = Internal then
-                  Panel.Wait_On;
-               end if;
-
-               Connector_Info.Read_EDID
-                 (Raw_EDID => Raw_EDID,
-                  Port_Cfg => Port_Cfg,
-                  Success  => Success);
-            end if;
-
-            if Success and then
-               (EDID.Compatible_Display (Raw_EDID, Port_Cfg.Display) and
-                EDID.Has_Preferred_Mode (Raw_EDID))
-            then
-               Configs (Config_Idx) := Pipe_Config'
-                 (Port        => Port,
-                  Framebuffer => Configs (Config_Idx).Framebuffer,
-                  Mode        => EDID.Preferred_Mode (Raw_EDID));
-            else
-               Configs (Config_Idx).Port := Disabled;
-            end if;
-         end if;
-      end loop;
-
-      if not Keep_Power then
-         Power_And_Clocks.Power_Set_To (Cur_Configs);
-
-         if Config.Has_Internal_Display and then
-            not Port_Configured (Cur_Configs, Internal)
-         then
-            Panel.Off;
-         end if;
-      end if;
-   end Auto_Configure;
-
    ----------------------------------------------------------------------------
 
    procedure Update_Outputs (Configs : Pipe_Configs)
diff --git a/common/hw-gfx-gma.ads b/common/hw-gfx-gma.ads
index de00962..baf16da 100644
--- a/common/hw-gfx-gma.ads
+++ b/common/hw-gfx-gma.ads
@@ -82,9 +82,6 @@
      (Configs  :    out Pipe_Configs;
       Ports    : in     Port_List;
       Max_Pipe : in     Pipe_Index := Pipe_Index'Last);
-   procedure Auto_Configure
-     (Configs     : in out Pipe_Configs;
-      Keep_Power  : in     Boolean := False);
    procedure Update_Outputs (Configs : Pipe_Configs);
 
    pragma Warnings (GNATprove, Off, "subprogram ""Dump_Configs"" has no effect",