gma: Add Intel i945 (Gen3) graphics init support
Add i945G (desktop) and i945GM (mobile) generation support, modeled
after the existing G45 generation code with hardware-specific
adaptations based on the Linux i915 DRM driver and coreboot.
Key hardware differences from G45 (Gen4):
- GTT on separate PCI BAR3 (not within BAR0)
- Simple 32-bit GTT PTEs (addr[31:12] | valid[0])
- No DSPSURF register (uses DSPADDR/DSPLINOFF instead)
- Gen3 fence registers: 32-bit at split 0x2000/0x3000 addresses
- Different PLL limits (VCO 1400-2800 MHz, 96 MHz refclk)
- SDVO multiplier in DPLL register bits[7:4]
- LVDS restricted to Pipe B (pre-i965 requirement)
- CDClk: fixed 400 MHz (desktop) or GCFGC-based (mobile)
- No HDMI/DP, only VGA, LVDS, and SDVO outputs
- PCI IDs: 0x2772 (I945G), 0x27a2/0x27ae (I945GM)
TESTED with thinkpad x60: LVDS & VGA works with a linear framebuffer.
Change-Id: Ib67b3d0ee5e06df427869dce4db926ba57a80fd8
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.sourcearcade.org/c/libgfxinit/+/476
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: Nico Huber <nico.h@gmx.de>
diff --git a/common/i945/Makefile.inc b/common/i945/Makefile.inc
new file mode 100644
index 0000000..3c7d022
--- /dev/null
+++ b/common/i945/Makefile.inc
@@ -0,0 +1,11 @@
+gfxinit-y += hw-gfx-gma-connectors.adb
+gfxinit-y += hw-gfx-gma-gmch-lvds.adb
+gfxinit-y += hw-gfx-gma-gmch-lvds.ads
+gfxinit-y += hw-gfx-gma-gmch-vga.adb
+gfxinit-y += hw-gfx-gma-gmch-vga.ads
+gfxinit-y += hw-gfx-gma-plls.adb
+gfxinit-y += hw-gfx-gma-plls.ads
+gfxinit-y += hw-gfx-gma-port_detect.adb
+gfxinit-y += hw-gfx-gma-gmch.ads
+gfxinit-y += hw-gfx-gma-power_and_clocks.ads
+gfxinit-y += hw-gfx-gma-power_and_clocks.adb