diff --git a/common/Makefile.inc b/common/Makefile.inc
index 9378f41..af6dc11 100644
--- a/common/Makefile.inc
+++ b/common/Makefile.inc
@@ -47,10 +47,13 @@
 gfxinit-y += hw-gfx-framebuffer_filler.adb
 gfxinit-y += hw-gfx-framebuffer_filler.ads
 
+CONFIG_GFX_GMA_PANEL_2_PORT	?= Disabled
+
 CONFIG_GFX_GMA_GENERATION	:= $(call strip_quotes,$(CONFIG_GFX_GMA_GENERATION))
 CONFIG_GFX_GMA_CPU		:= $(call strip_quotes,$(CONFIG_GFX_GMA_CPU))
 CONFIG_GFX_GMA_CPU_VARIANT	:= $(call strip_quotes,$(CONFIG_GFX_GMA_CPU_VARIANT))
 CONFIG_GFX_GMA_PANEL_1_PORT	:= $(call strip_quotes,$(CONFIG_GFX_GMA_PANEL_1_PORT))
+CONFIG_GFX_GMA_PANEL_2_PORT	:= $(call strip_quotes,$(CONFIG_GFX_GMA_PANEL_2_PORT))
 CONFIG_GFX_GMA_ANALOG_I2C_PORT	:= $(call strip_quotes,$(CONFIG_GFX_GMA_ANALOG_I2C_PORT))
 
 _GEN_NONCONST := $(strip \
@@ -73,6 +76,7 @@
 	printf "    GENERATE   $(patsubst /%,%,$(subst $(obj)/,,$@))\n"
 	sed -e's/<<GEN>>/$(CONFIG_GFX_GMA_GENERATION)/' \
 	    -e's/<<PANEL_1_PORT>>/$(CONFIG_GFX_GMA_PANEL_1_PORT)/' \
+	    -e's/<<PANEL_2_PORT>>/$(CONFIG_GFX_GMA_PANEL_2_PORT)/' \
 	    -e's/<<ANALOG_I2C_PORT>>/$(CONFIG_GFX_GMA_ANALOG_I2C_PORT)/' \
 	    -e's/<<DEFAULT_MMIO_BASE>>/$(CONFIG_GFX_GMA_DEFAULT_MMIO)/' \
 	    -e'/constant Gen_CPU\(_Var\)\?/d' \
@@ -91,6 +95,7 @@
 	    -e's/<<CPU>>/$(CONFIG_GFX_GMA_CPU)/' \
 	    -e's/<<CPU_VARIANT>>/$(CONFIG_GFX_GMA_CPU_VARIANT)/' \
 	    -e's/<<PANEL_1_PORT>>/$(CONFIG_GFX_GMA_PANEL_1_PORT)/' \
+	    -e's/<<PANEL_2_PORT>>/$(CONFIG_GFX_GMA_PANEL_2_PORT)/' \
 	    -e's/<<ANALOG_I2C_PORT>>/$(CONFIG_GFX_GMA_ANALOG_I2C_PORT)/' \
 	    -e's/<<DEFAULT_MMIO_BASE>>/$(CONFIG_GFX_GMA_DEFAULT_MMIO)/' \
 	    -e":s$$(printf '\n ')/,$$/{N;s/,\n.*Dyn_CPU\(_Var\)\?[^,)]*//;ts$$(printf '\n ')P;D;}" \
diff --git a/common/hw-gfx-gma-config.ads.template b/common/hw-gfx-gma-config.ads.template
index 39fa825..8cd3cff 100644
--- a/common/hw-gfx-gma-config.ads.template
+++ b/common/hw-gfx-gma-config.ads.template
@@ -44,7 +44,8 @@
    CPU_Var : constant Gen_CPU_Variant := <<CPU_VARIANT>>;
 
    Panel_Ports : constant array (Valid_Panels) of Port_Type :=
-     (Panel_1 => <<PANEL_1_PORT>>);
+     (Panel_1 => <<PANEL_1_PORT>>,
+      Panel_2 => <<PANEL_2_PORT>>);
 
    Analog_I2C_Port : constant PCH_Port := <<ANALOG_I2C_PORT>>;
 
diff --git a/common/hw-gfx-gma-panel.adb b/common/hw-gfx-gma-panel.adb
index 3d6b342..e343deb 100644
--- a/common/hw-gfx-gma-panel.adb
+++ b/common/hw-gfx-gma-panel.adb
@@ -38,7 +38,7 @@
       BL_Off_To_Power_Down =>  50_000,
       Power_Cycle_Delay    => 510_000);
 
-   Delays_US : Panel_Power_Delays;
+   Delays_US : array (Valid_Panels) of Panel_Power_Delays;
 
    ----------------------------------------------------------------------------
 
@@ -53,8 +53,9 @@
    -- and the hardware power sequencer. The latter option would be less error
    -- prone, as the hardware might just don't work as expected.
 
-   Power_Cycle_Timer : Time.T;
-   Power_Up_Timer    : Time.T;
+   type Panel_Times is array (Valid_Panels) of Time.T;
+   Power_Cycle_Timer : Panel_Times;
+   Power_Up_Timer    : Panel_Times;
 
    ----------------------------------------------------------------------------
 
@@ -97,18 +98,28 @@
       DIVISOR    : Registers.Registers_Index;
    end record;
 
-   Panel_PP_Regs : constant PP_Regs := (if Config.Has_PCH_Panel_Power then
-     (STATUS     => Registers.PCH_PP_STATUS,
-      CONTROL    => Registers.PCH_PP_CONTROL,
-      ON_DELAYS  => Registers.PCH_PP_ON_DELAYS,
-      OFF_DELAYS => Registers.PCH_PP_OFF_DELAYS,
-      DIVISOR    => Registers.PCH_PP_DIVISOR)
-   else
-     (STATUS     => Registers.GMCH_PP_STATUS,
-      CONTROL    => Registers.GMCH_PP_CONTROL,
-      ON_DELAYS  => Registers.GMCH_PP_ON_DELAYS,
-      OFF_DELAYS => Registers.GMCH_PP_OFF_DELAYS,
-      DIVISOR    => Registers.GMCH_PP_DIVISOR));
+   PP : constant array (Valid_Panels) of PP_Regs :=
+     (if Config.Has_PCH_Panel_Power then
+        (Panel_1 =>
+           (STATUS     => Registers.PCH_PP_STATUS,
+            CONTROL    => Registers.PCH_PP_CONTROL,
+            ON_DELAYS  => Registers.PCH_PP_ON_DELAYS,
+            OFF_DELAYS => Registers.PCH_PP_OFF_DELAYS,
+            DIVISOR    => Registers.PCH_PP_DIVISOR),
+         Panel_2 =>
+           (STATUS     => Registers.BXT_PP_STATUS_2,
+            CONTROL    => Registers.BXT_PP_CONTROL_2,
+            ON_DELAYS  => Registers.BXT_PP_ON_DELAYS_2,
+            OFF_DELAYS => Registers.BXT_PP_OFF_DELAYS_2,
+            DIVISOR    => Registers.PCH_PP_DIVISOR))  -- won't be used
+
+      else
+        (Panel_1 .. Panel_2 =>
+           (STATUS     => Registers.GMCH_PP_STATUS,
+            CONTROL    => Registers.GMCH_PP_CONTROL,
+            ON_DELAYS  => Registers.GMCH_PP_ON_DELAYS,
+            OFF_DELAYS => Registers.GMCH_PP_OFF_DELAYS,
+            DIVISOR    => Registers.GMCH_PP_DIVISOR)));
 
    function PCH_PP_ON_DELAYS_PWR_UP (US : Natural) return Word32 is
    begin
@@ -160,6 +171,22 @@
 
    BXT_BLC_PWM_CTL_ENABLE              : constant := 16#00_0001# * 2 ** 31;
 
+   type BLC_Regs is record
+      CTL   : Registers.Registers_Index;
+      FREQ  : Registers.Registers_Index;
+      DUTY  : Registers.Registers_Index;
+   end record;
+
+   BLC : constant array (Valid_Panels) of BLC_Regs :=
+     (Panel_1 =>
+        (CTL   => Registers.BXT_BLC_PWM_CTL_1,
+         FREQ  => Registers.BXT_BLC_PWM_FREQ_1,
+         DUTY  => Registers.BXT_BLC_PWM_DUTY_1),
+      Panel_2 =>
+        (CTL   => Registers.BXT_BLC_PWM_CTL_2,
+         FREQ  => Registers.BXT_BLC_PWM_FREQ_2,
+         DUTY  => Registers.BXT_BLC_PWM_DUTY_2));
+
    ----------------------------------------------------------------------------
 
    procedure Static_Init
@@ -168,11 +195,12 @@
         (Output => (Power_Cycle_Timer, Power_Up_Timer, Delays_US),
          Input  => (Time.State))
    is
+      Now : constant Time.T := Time.Now;
    begin
-      Power_Cycle_Timer := Time.Now;
+      Power_Cycle_Timer := (others => Now);
       Power_Up_Timer    := Power_Cycle_Timer;
 
-      Delays_US := Default_EDP_Delays_US;
+      Delays_US := (others => Default_EDP_Delays_US);
    end Static_Init;
 
    ----------------------------------------------------------------------------
@@ -189,7 +217,7 @@
       end loop;
    end Check_PP_Delays;
 
-   procedure Setup_PP_Sequencer (Default_Delays : Boolean := False)
+   procedure Setup_PP_Sequencer (Panel : Valid_Panels; Default_Delays : Boolean)
    is
       Power_Delay, Port_Select : Word32;
 
@@ -197,35 +225,34 @@
    begin
       pragma Debug (Debug.Put_Line (GNAT.Source_Info.Enclosing_Entity));
 
-      Static_Init;
-
       if Default_Delays then
          Override_Delays := True;
       else
-         Registers.Read (Panel_PP_Regs.ON_DELAYS, Power_Delay);
-         Delays_US (Power_Up_Delay) := 100 * Natural
+         Registers.Read (PP (Panel).ON_DELAYS, Power_Delay);
+         Delays_US (Panel) (Power_Up_Delay) := 100 * Natural
            (Shift_Right (Power_Delay and PCH_PP_ON_DELAYS_PWR_UP_MASK, 16));
-         Delays_US (Power_Up_To_BL_On) := 100 * Natural
+         Delays_US (Panel) (Power_Up_To_BL_On) := 100 * Natural
            (Power_Delay and PCH_PP_ON_DELAYS_PWR_UP_BL_ON_MASK);
 
-         Registers.Read (Panel_PP_Regs.OFF_DELAYS, Power_Delay);
-         Delays_US (Power_Down_Delay) := 100 * Natural
+         Registers.Read (PP (Panel).OFF_DELAYS, Power_Delay);
+         Delays_US (Panel) (Power_Down_Delay) := 100 * Natural
            (Shift_Right (Power_Delay and PCH_PP_OFF_DELAYS_PWR_DOWN_MASK, 16));
-         Delays_US (BL_Off_To_Power_Down) := 100 * Natural
+         Delays_US (Panel) (BL_Off_To_Power_Down) := 100 * Natural
            (Power_Delay and PCH_PP_OFF_DELAYS_BL_OFF_PWR_DOWN_MASK);
 
          if Config.Has_PP_Divisor_Reg then
-            Registers.Read (Panel_PP_Regs.DIVISOR, Power_Delay);
+            Registers.Read (PP (Panel).DIVISOR, Power_Delay);
          else
-            Registers.Read (Panel_PP_Regs.CONTROL, Power_Delay);
-            Power_Delay := Shift_Right (Power_Delay, BXT_PP_CONTROL_PWR_CYC_DELAY_SHIFT);
+            Registers.Read (PP (Panel).CONTROL, Power_Delay);
+            Power_Delay := Shift_Right
+              (Power_Delay, BXT_PP_CONTROL_PWR_CYC_DELAY_SHIFT);
          end if;
          if (Power_Delay and PCH_PP_DIVISOR_PWR_CYC_DELAY_MASK) > 1 then
-            Delays_US (Power_Cycle_Delay) := 100_000 * (Natural
+            Delays_US (Panel) (Power_Cycle_Delay) := 100_000 * (Natural
               (Power_Delay and PCH_PP_DIVISOR_PWR_CYC_DELAY_MASK) - 1);
          end if;
 
-         Check_PP_Delays (Delays_US, Override_Delays);
+         Check_PP_Delays (Delays_US (Panel), Override_Delays);
       end if;
 
       if Override_Delays then
@@ -243,51 +270,63 @@
 
          -- Force power-up to backlight-on delay to 100us as recommended by PRM.
          Registers.Unset_And_Set_Mask
-           (Register    => Panel_PP_Regs.ON_DELAYS,
+           (Register    => PP (Panel).ON_DELAYS,
             Mask_Unset  => PCH_PP_ON_DELAYS_PORT_SELECT_MASK or
                            PCH_PP_ON_DELAYS_PWR_UP_MASK or
                            PCH_PP_ON_DELAYS_PWR_UP_BL_ON_MASK,
             Mask_Set    => Port_Select or
-                           PCH_PP_ON_DELAYS_PWR_UP (Delays_US (Power_Up_Delay))
+                           PCH_PP_ON_DELAYS_PWR_UP
+                             (Delays_US (Panel) (Power_Up_Delay))
                            or PCH_PP_ON_DELAYS_PWR_UP_BL_ON (100));
 
          Registers.Unset_And_Set_Mask
-           (Register    => Panel_PP_Regs.OFF_DELAYS,
+           (Register    => PP (Panel).OFF_DELAYS,
             Mask_Unset  => PCH_PP_OFF_DELAYS_PWR_DOWN_MASK or
                            PCH_PP_OFF_DELAYS_BL_OFF_PWR_DOWN_MASK,
             Mask_Set    => PCH_PP_OFF_DELAYS_PWR_DOWN
-                             (Delays_US (Power_Down_Delay)) or
+                             (Delays_US (Panel) (Power_Down_Delay)) or
                            PCH_PP_OFF_DELAYS_BL_OFF_PWR_DOWN
-                             (Delays_US (BL_Off_To_Power_Down)));
+                             (Delays_US (Panel) (BL_Off_To_Power_Down)));
 
          if Config.Has_PP_Divisor_Reg then
             Registers.Unset_And_Set_Mask
-              (Register    => Panel_PP_Regs.DIVISOR,
+              (Register    => PP (Panel).DIVISOR,
                Mask_Unset  => PCH_PP_DIVISOR_PWR_CYC_DELAY_MASK,
                Mask_Set    => PCH_PP_DIVISOR_PWR_CYC_DELAY
-                                (Delays_US (Power_Cycle_Delay)));
+                                (Delays_US (Panel) (Power_Cycle_Delay)));
          else
             Registers.Unset_And_Set_Mask
-              (Register    => Panel_PP_Regs.CONTROL,
+              (Register    => PP (Panel).CONTROL,
                Mask_Unset  => BXT_PP_CONTROL_PWR_CYC_DELAY_MASK,
                Mask_Set    => BXT_PP_CONTROL_PWR_CYC_DELAY
-                                (Delays_US (Power_Cycle_Delay)));
+                                (Delays_US (Panel) (Power_Cycle_Delay)));
          end if;
       end if;
 
       if Config.Has_PP_Write_Protection then
          Registers.Unset_And_Set_Mask
-           (Register    => Panel_PP_Regs.CONTROL,
+           (Register    => PP (Panel).CONTROL,
             Mask_Unset  => PCH_PP_CONTROL_WRITE_PROTECT_MASK,
             Mask_Set    => PCH_PP_CONTROL_WRITE_PROTECT_KEY or
                            PCH_PP_CONTROL_POWER_DOWN_ON_RESET);
       else
          Registers.Set_Mask
-           (Register => Panel_PP_Regs.CONTROL,
+           (Register => PP (Panel).CONTROL,
             Mask     => PCH_PP_CONTROL_POWER_DOWN_ON_RESET);
       end if;
    end Setup_PP_Sequencer;
 
+   procedure Setup_PP_Sequencer (Default_Delays : Boolean := False) is
+   begin
+      pragma Debug (Debug.Put_Line (GNAT.Source_Info.Enclosing_Entity));
+
+      for Panel in Valid_Panels loop
+         if Config.Panel_Ports (Panel) /= Disabled then
+            Setup_PP_Sequencer (Panel, Default_Delays);
+         end if;
+      end loop;
+   end Setup_PP_Sequencer;
+
    ----------------------------------------------------------------------------
 
    procedure VDD_Override (Panel : Panel_Control) is
@@ -315,14 +354,15 @@
 
       pragma Debug (Debug.Put_Line (GNAT.Source_Info.Enclosing_Entity));
 
-      Registers.Is_Set_Mask (Panel_PP_Regs.CONTROL, PCH_PP_CONTROL_TARGET_ON, Was_On);
+      Registers.Is_Set_Mask (PP (Panel).CONTROL, PCH_PP_CONTROL_TARGET_ON, Was_On);
       if not Was_On then
-         Time.Delay_Until (Power_Cycle_Timer);
+         Time.Delay_Until (Power_Cycle_Timer (Panel));
       end if;
 
-      Registers.Set_Mask (Panel_PP_Regs.CONTROL, PCH_PP_CONTROL_TARGET_ON);
+      Registers.Set_Mask (PP (Panel).CONTROL, PCH_PP_CONTROL_TARGET_ON);
       if not Was_On then
-         Power_Up_Timer := Time.US_From_Now (Delays_US (Power_Up_Delay));
+         Power_Up_Timer (Panel) :=
+            Time.US_From_Now (Delays_US (Panel) (Power_Up_Delay));
       end if;
       if Wait then
          Wait_On (Panel);
@@ -337,13 +377,13 @@
 
       pragma Debug (Debug.Put_Line (GNAT.Source_Info.Enclosing_Entity));
 
-      Time.Delay_Until (Power_Up_Timer);
+      Time.Delay_Until (Power_Up_Timer (Panel));
       Registers.Wait_Unset_Mask
-        (Register => Panel_PP_Regs.STATUS,
+        (Register => PP (Panel).STATUS,
          Mask     => PCH_PP_STATUS_PWR_SEQ_PROGRESS_MASK,
          TOut_MS  => 300);
 
-      Registers.Unset_Mask (Panel_PP_Regs.CONTROL, PCH_PP_CONTROL_VDD_OVERRIDE);
+      Registers.Unset_Mask (PP (Panel).CONTROL, PCH_PP_CONTROL_VDD_OVERRIDE);
    end Wait_On;
 
    procedure Off (Panel : Panel_Control)
@@ -356,20 +396,21 @@
 
       pragma Debug (Debug.Put_Line (GNAT.Source_Info.Enclosing_Entity));
 
-      Registers.Is_Set_Mask (Panel_PP_Regs.CONTROL, PCH_PP_CONTROL_TARGET_ON, Was_On);
+      Registers.Is_Set_Mask (PP (Panel).CONTROL, PCH_PP_CONTROL_TARGET_ON, Was_On);
       Registers.Unset_Mask
-        (Register => Panel_PP_Regs.CONTROL,
+        (Register => PP (Panel).CONTROL,
          Mask     => PCH_PP_CONTROL_TARGET_ON or
                      PCH_PP_CONTROL_VDD_OVERRIDE);
       if Was_On then
-         Time.U_Delay (Delays_US (Power_Down_Delay));
+         Time.U_Delay (Delays_US (Panel) (Power_Down_Delay));
       end if;
       Registers.Wait_Unset_Mask
-        (Register => Panel_PP_Regs.STATUS,
+        (Register => PP (Panel).STATUS,
          Mask     => PCH_PP_STATUS_PWR_SEQ_PROGRESS_MASK,
          TOut_MS  => 600);
       if Was_On then
-         Power_Cycle_Timer := Time.US_From_Now (Delays_US (Power_Cycle_Delay));
+         Power_Cycle_Timer (Panel) :=
+            Time.US_From_Now (Delays_US (Panel) (Power_Cycle_Delay));
       end if;
    end Off;
 
@@ -385,11 +426,11 @@
 
       if Config.Has_New_Backlight_Control then
          Registers.Set_Mask
-           (Register => Registers.BXT_BLC_PWM_CTL_1,
+           (Register => BLC (Panel).CTL,
             Mask     => BXT_BLC_PWM_CTL_ENABLE);
       else
          Registers.Set_Mask
-           (Register => Panel_PP_Regs.CONTROL,
+           (Register => PP (Panel).CONTROL,
             Mask     => PCH_PP_CONTROL_BACKLIGHT_ENABLE);
       end if;
    end Backlight_On;
@@ -404,11 +445,11 @@
 
       if Config.Has_New_Backlight_Control then
          Registers.Unset_Mask
-           (Register => Registers.BXT_BLC_PWM_CTL_1,
+           (Register => BLC (Panel).CTL,
             Mask     => BXT_BLC_PWM_CTL_ENABLE);
       else
          Registers.Unset_Mask
-           (Register => Panel_PP_Regs.CONTROL,
+           (Register => PP (Panel).CONTROL,
             Mask     => PCH_PP_CONTROL_BACKLIGHT_ENABLE);
       end if;
    end Backlight_Off;
@@ -422,7 +463,7 @@
       pragma Debug (Debug.Put_Line (GNAT.Source_Info.Enclosing_Entity));
 
       if Config.Has_New_Backlight_Control then
-         Registers.Write (Registers.BXT_BLC_PWM_DUTY_1, Level);
+         Registers.Write (BLC (Panel).DUTY, Level);
       else
          Registers.Unset_And_Set_Mask
            (Register    => Registers.BLC_PWM_CPU_CTL,
@@ -441,7 +482,7 @@
       pragma Debug (Debug.Put_Line (GNAT.Source_Info.Enclosing_Entity));
 
       if Config.Has_New_Backlight_Control then
-         Registers.Read (Registers.BXT_BLC_PWM_FREQ_1, Level);
+         Registers.Read (BLC (Panel).FREQ, Level);
       else
          Registers.Read (Registers.BLC_PWM_PCH_CTL2, Level);
          Level := Shift_Right (Level, PCH_BLC_PWM_CTL2_BL_MOD_FREQ_SHIFT);
diff --git a/common/hw-gfx-gma-panel.ads b/common/hw-gfx-gma-panel.ads
index 2a97f0e..7d69e56 100644
--- a/common/hw-gfx-gma-panel.ads
+++ b/common/hw-gfx-gma-panel.ads
@@ -29,14 +29,10 @@
    procedure Setup_PP_Sequencer (Default_Delays : Boolean := False)
    with
       Global =>
-        (Input  => Time.State,
-         In_Out => Registers.Register_State,
-         Output => Panel_State),
+        (In_Out => (Panel_State, Registers.Register_State)),
       Depends =>
         ((Panel_State, Registers.Register_State) =>
-           (Time.State, Registers.Register_State, Default_Delays)),
-      Pre      => True,
-      Post     => True;
+           (Panel_State, Registers.Register_State, Default_Delays));
 
    ----------------------------------------------------------------------------
 
diff --git a/common/hw-gfx-gma.adb b/common/hw-gfx-gma.adb
index 04caa61..be623e4 100644
--- a/common/hw-gfx-gma.adb
+++ b/common/hw-gfx-gma.adb
@@ -502,11 +502,11 @@
          end if;
       end if;
 
+      Panel.Static_Init;   -- early for flow analysis
+
       if not Success then
          pragma Debug (Debug.Put_Line ("ERROR: Incompatible CPU or PCH."));
 
-         Panel.Static_Init;   -- for flow analysis
-
          Initialized := False;
          return;
       end if;
diff --git a/common/hw-gfx-gma.ads b/common/hw-gfx-gma.ads
index 0c44434..1215fc5 100644
--- a/common/hw-gfx-gma.ads
+++ b/common/hw-gfx-gma.ads
@@ -253,8 +253,8 @@
    subtype PCH_HDMI_Port is PCH_Port range PCH_HDMI_B .. PCH_HDMI_D;
    subtype PCH_DP_Port is PCH_Port range PCH_DP_B .. PCH_DP_D;
 
-   type Panel_Control is (No_Panel, Panel_1);
-   subtype Valid_Panels is Panel_Control range Panel_1 .. Panel_1;
+   type Panel_Control is (No_Panel, Panel_1, Panel_2);
+   subtype Valid_Panels is Panel_Control range Panel_1 .. Panel_2;
 
    type Port_Config is
       record
diff --git a/configs/broxton b/configs/broxton
index 35a6f6c..5d3b859 100644
--- a/configs/broxton
+++ b/configs/broxton
@@ -2,6 +2,7 @@
 CONFIG_GFX_GMA_GENERATION	= Broxton
 CONFIG_GFX_GMA_CPU		= Broxton
 CONFIG_GFX_GMA_CPU_VARIANT	= Normal	# N/A
-CONFIG_GFX_GMA_PANEL_1_PORT	= eDP
+CONFIG_GFX_GMA_PANEL_1_PORT	= Disabled
+CONFIG_GFX_GMA_PANEL_2_PORT	= eDP
 CONFIG_GFX_GMA_ANALOG_I2C_PORT	= PCH_DAC	# N/A
 CONFIG_GFX_GMA_DEFAULT_MMIO	= 16\#e000_0000\#