)]}'
{
  "commit": "530651bfb439d37abb0f07593d7ab604f2419a18",
  "tree": "8b53fa82b50c159ec0be3916cc119b5de45113a0",
  "parents": [
    "a4e7f25c408902677824f5edc3f6ad1e760241a3"
  ],
  "author": {
    "name": "Nico Huber",
    "email": "nico.h@gmx.de",
    "time": "Thu Oct 03 14:59:38 2019 +0200"
  },
  "committer": {
    "name": "Nico Huber",
    "email": "nico.h@gmx.de",
    "time": "Sat Oct 05 23:25:47 2019 +0000"
  },
  "message": "gma g45 config: Limit HDMI rate to 165MHz\n\nTests with a 3440x1440 pixel display have shown that the dot clock\nwas chosen much too high (we got either 720x1440 at half the rate\nor a completely garbled picture). Turns out, Linux\u0027 i915 limits the\nclock to the original DVI\u0027s 165MHz for 4th gen and earlier, so we\u0027ll\ndo that too. This resulted in a stable picture with 3440x1440 @ 31Hz\n(the display even synchronized better on this than the configuration\nchosen by i915).\n\nChange-Id: I30cb67feedd776148457101d1ca3e3b8538e672f\nSigned-off-by: Nico Huber \u003cnico.h@gmx.de\u003e\nReviewed-on: https://review.coreboot.org/c/libgfxinit/+/35779\nReviewed-by: Arthur Heymans \u003carthur@aheymans.xyz\u003e\n",
  "tree_diff": [
    {
      "type": "modify",
      "old_id": "d5bd2ba477002a3ba1d7213678b4a4ceec0b5030",
      "old_mode": 33188,
      "old_path": "common/hw-gfx-gma-config.ads.template",
      "new_id": "e4e557a11e3e26c0030983543d16159895e2bba1",
      "new_mode": 33188,
      "new_path": "common/hw-gfx-gma-config.ads.template"
    }
  ]
}