)]}'
{
  "log": [
    {
      "commit": "dd6e07ab3ab12346ab68f9e93f725d651a90964d",
      "tree": "384798d6614b860a9cff68e3ed5fe0665f15dcad",
      "parents": [
        "47aa85c8fdf82b4e3b92dbcdfa3e4490c6782b69"
      ],
      "author": {
        "name": "Nico Huber",
        "email": "nico.h@gmx.de",
        "time": "Sat Feb 21 17:55:26 2026 +0100"
      },
      "committer": {
        "name": "Nico Huber",
        "email": "nico.h@gmx.de",
        "time": "Sun Jun 28 09:29:37 2026 +0000"
      },
      "message": "memory_bus: Pass master instead of flash to .chip_read/write\n\nThere is / should be no need to know flash-chip details in a programmer\ndriver. They should only pass data around and leave the chip details to\neach chip driver.\n\nThis will allow us to probe for chips before knowing the details and as\na bonus gets rid of many `flash.h` dependencies.\n\nChange-Id: Iae78fbbd95567134da890613114999cb14c3a011\nSigned-off-by: Nico Huber \u003cnico.h@gmx.de\u003e\nReviewed-on: https://review.sourcearcade.org/c/flashprog/+/437\n"
    },
    {
      "commit": "47aa85c8fdf82b4e3b92dbcdfa3e4490c6782b69",
      "tree": "965bb18274b8fb44beb583b34a8a9098b4a87ad2",
      "parents": [
        "84914db6304ccd0f6f41ba7b4f6c0a83ef66e5d0"
      ],
      "author": {
        "name": "Nico Huber",
        "email": "nico.h@gmx.de",
        "time": "Sat Feb 21 14:57:20 2026 +0100"
      },
      "committer": {
        "name": "Nico Huber",
        "email": "nico.h@gmx.de",
        "time": "Sun Jun 28 09:29:37 2026 +0000"
      },
      "message": "memory_bus: Turn flashbase into a par_master member `rom_base`\n\nGet rid of the global `flashbase`. Treat overrides for the `rom_base`\nsimilar to `max_rom_decode`: Gather the information in `internal_data`\nand then pass it to register_par_master().\n\nChange-Id: Ib9ed7234a849fe3550200fd602226d0036da15f0\nSigned-off-by: Nico Huber \u003cnico.h@gmx.de\u003e\nReviewed-on: https://review.sourcearcade.org/c/flashprog/+/436\n"
    },
    {
      "commit": "89569d60e3aeeec651496b2e7a2e6064d782ab3b",
      "tree": "bf0c3951886de60086d32ff6e1a850adad926da6",
      "parents": [
        "929d2e1b17a448d3352dbecb6a620ee0c1e65a58"
      ],
      "author": {
        "name": "Nico Huber",
        "email": "nico.h@gmx.de",
        "time": "Thu Jan 12 23:31:40 2023 +0100"
      },
      "committer": {
        "name": "Nico Huber",
        "email": "nico.h@gmx.de",
        "time": "Sat Mar 09 10:30:24 2024 +0000"
      },
      "message": "memory_mapped: Reduce `decode_sizes` to a single `max_rom_decode`\n\nWe used to store the maximum decode size, i.e. the maximum memory-mapped\nrange of the flash chip, per bus type (Parallel, LPC, FWH, SPI). There\nwas no programmer in the tree that really made use of it, though:\n* The chipset drivers usually focus on a single bus type. And even if\n  they advertise the whole default set (PAR, LPC, FWH), they only pro-\n  vide a maximum decode size for one of them. The latter is probably\n  wrong, should really more than one bus type be supported.\n* PCI and external programmers all support only a single bus type, with\n  the exception of `serprog` which doesn\u0027t set a maximum decode size.\n\nWhat made the distinction even less useful is that for some chips that\nsupport multiple bus types, i.e. LPC+FWH, we can\u0027t even detect which\ntype it is. The existing code around this also only tried to provide\nthe best possible warning message at the expense of breaking the pro-\ngrammer abstraction.\n\nHence, unify the set of sizes into a single `max_rom_decode` property.\nWe store it inside the `registered_master` struct right away, to avoid\nany more use of globals.\n\nChange-Id: I2aaea18d5b4255eb843a625b016ee74bb145ed85\nSigned-off-by: Nico Huber \u003cnico.h@gmx.de\u003e\nReviewed-on: https://review.sourcearcade.org/c/flashprog/+/72531\n"
    },
    {
      "commit": "e3a26888e14d16592c2c79d1516828d3d32961a4",
      "tree": "02d401e60defd27fe7bee194978bac782284cb39",
      "parents": [
        "2b66ad9c4465432e6f2aff2e95f1e7a556bfc3f0"
      ],
      "author": {
        "name": "Nico Huber",
        "email": "nico.h@gmx.de",
        "time": "Wed Jan 11 21:45:51 2023 +0100"
      },
      "committer": {
        "name": "Nico Huber",
        "email": "nico.h@gmx.de",
        "time": "Sat Mar 09 10:30:24 2024 +0000"
      },
      "message": "Pass programmer context to programmer-\u003einit()\n\nChange-Id: I064eb4e25c3d382e4e5bde802306698fafe5e1d0\nSigned-off-by: Nico Huber \u003cnico.h@gmx.de\u003e\nReviewed-on: https://review.sourcearcade.org/c/flashprog/+/72526\n"
    },
    {
      "commit": "621208c341cb400b9b13b5874da49504818a9f49",
      "tree": "1a851dd54e96add7fe6e30de98fe3b5e4424a775",
      "parents": [
        "56684d9a2ed8a0f878472d5aa0518a3200526812"
      ],
      "author": {
        "name": "Edward O\u0027Callaghan",
        "email": "quasisec@google.com",
        "time": "Wed Sep 07 22:21:39 2022 +1000"
      },
      "committer": {
        "name": "Nico Huber",
        "email": "nico.h@gmx.de",
        "time": "Sun Jan 29 12:29:02 2023 +0000"
      },
      "message": "drivers/: Make \u0027fallback_{un}map\u0027 the default unless defined\n\nDrop the explicit need to specify the default \u0027fallback_{un}map\u0027\ncallback function pointer from the \u0027programmer_entry\u0027 struct.\nThis is a reasonable default for every other driver in the tree\nwith only a select few exceptions [atavia, serprog, dummyflasher\nand internal].\n\nThus this simplifies driver development and paves way\nto remove the \u0027programmer\u0027 global handle.\n\nflashrom-stable: Updated `dirtyjtag_spi` which was added earlier.\n\nChange-Id: I5ea7bd68f7ae2cd4af9902ef07255ab6ce0bfdb3\nSigned-off-by: Edward O\u0027Callaghan \u003cquasisec@google.com\u003e\nOriginal-Reviewed-on: https://review.coreboot.org/c/flashrom/+/67404\nOriginal-Reviewed-by: Felix Singer \u003cfelixsinger@posteo.net\u003e\nOriginal-Reviewed-by: Anastasia Klimchuk \u003caklm@chromium.org\u003e\nOriginal-Reviewed-by: Angel Pons \u003cth3fanbus@gmail.com\u003e\nReviewed-on: https://review.coreboot.org/c/flashrom-stable/+/72360\nTested-by: build bot (Jenkins) \u003cno-reply@coreboot.org\u003e\nReviewed-by: Nico Huber \u003cnico.h@gmx.de\u003e\n"
    },
    {
      "commit": "56684d9a2ed8a0f878472d5aa0518a3200526812",
      "tree": "020c2d8db0e05a74981b5b381c37febd46fb796d",
      "parents": [
        "78ed668a924db5dd78c3530655127f895728fe59"
      ],
      "author": {
        "name": "Edward O\u0027Callaghan",
        "email": "quasisec@google.com",
        "time": "Wed Sep 07 10:47:45 2022 +1000"
      },
      "committer": {
        "name": "Nico Huber",
        "email": "nico.h@gmx.de",
        "time": "Sun Jan 29 12:29:02 2023 +0000"
      },
      "message": "drivers/: Make \u0027internal_delay\u0027 the default unless defined\n\nDrop the explicit need to specify the default \u0027internal_delay\u0027\ncallback function pointer in the programmer_entry struct.\nThis is a reasonable default for every other driver in the\ntree with only the two exceptions of ch341a_spi.c and serprog.c.\n\nThus this simplifies driver development.\n\nflashrom-stable: Updated `dirtyjtag_spi` which was added earlier.\n\nChange-Id: I17460bc2c0aebcbb48c8dfa052b260991525cc49\nSigned-off-by: Edward O\u0027Callaghan \u003cquasisec@google.com\u003e\nOriginal-Reviewed-on: https://review.coreboot.org/c/flashrom/+/67391\nOriginal-Reviewed-by: Peter Marheine \u003cpmarheine@chromium.org\u003e\nOriginal-Reviewed-by: Angel Pons \u003cth3fanbus@gmail.com\u003e\nOriginal-Reviewed-by: Thomas Heijligen \u003csrc@posteo.de\u003e\nOriginal-Reviewed-by: Felix Singer \u003cfelixsinger@posteo.net\u003e\nOriginal-Reviewed-by: Nikolai Artemiev \u003cnartemiev@google.com\u003e\nReviewed-on: https://review.coreboot.org/c/flashrom-stable/+/72359\nTested-by: build bot (Jenkins) \u003cno-reply@coreboot.org\u003e\nReviewed-by: Nico Huber \u003cnico.h@gmx.de\u003e\n"
    },
    {
      "commit": "a065520a7c7eedcca961de1fc891cc0b04e6df77",
      "tree": "f7a4c280f6d3114b98a52e147f988c4ae293271b",
      "parents": [
        "d96c97c77309f1cf1ff1cbe9fa521a75fc9d5698"
      ],
      "author": {
        "name": "Thomas Heijligen",
        "email": "thomas.heijligen@secunet.com",
        "time": "Tue Dec 14 16:36:05 2021 +0100"
      },
      "committer": {
        "name": "Nico Huber",
        "email": "nico.h@gmx.de",
        "time": "Sun Jan 29 12:29:02 2023 +0000"
      },
      "message": "hwaccess: move x86 port I/O related code into own files\n\nAllow port I/O related code to be compiled independent from memory\nmapping functionality. This enables for a better selection of needed\nhardware access types.\n\nChange-Id: I372b4a409f036da766c42bc406b596bc41b0f75a\nSigned-off-by: Thomas Heijligen \u003cthomas.heijligen@secunet.com\u003e\nOriginal-Reviewed-on: https://review.coreboot.org/c/flashrom/+/60110\nOriginal-Reviewed-by: Nico Huber \u003cnico.h@gmx.de\u003e\nReviewed-on: https://review.coreboot.org/c/flashrom-stable/+/72265\nReviewed-by: Nico Huber \u003cnico.h@gmx.de\u003e\nTested-by: build bot (Jenkins) \u003cno-reply@coreboot.org\u003e\n"
    },
    {
      "commit": "d96c97c77309f1cf1ff1cbe9fa521a75fc9d5698",
      "tree": "2ca206a0bb2873472e243eb2138c7f1e0345abf2",
      "parents": [
        "b7c6a66d5167a9cb6d83081f4c84b7a6c0d28046"
      ],
      "author": {
        "name": "Thomas Heijligen",
        "email": "thomas.heijligen@secunet.com",
        "time": "Tue Nov 02 21:03:00 2021 +0100"
      },
      "committer": {
        "name": "Nico Huber",
        "email": "nico.h@gmx.de",
        "time": "Sun Jan 29 12:29:02 2023 +0000"
      },
      "message": "pci.h: move include into own wrapper\n\nSplit the include of hwaccess and libpci. There is no need to have pci.h\nincluded in hwaccess.\n\nChange-Id: Ibf00356f0ef5cc92e0ec99f8fe5cdda56f47b166\nSigned-off-by: Thomas Heijligen \u003cthomas.heijligen@secunet.com\u003e\nOriginal-Reviewed-on: https://review.coreboot.org/c/flashrom/+/58883\nOriginal-Reviewed-by: Nico Huber \u003cnico.h@gmx.de\u003e\nReviewed-on: https://review.coreboot.org/c/flashrom-stable/+/72264\nReviewed-by: Nico Huber \u003cnico.h@gmx.de\u003e\nTested-by: build bot (Jenkins) \u003cno-reply@coreboot.org\u003e\n"
    },
    {
      "commit": "51264d5def2188624a3354c62722a95e64224645",
      "tree": "f8b01a56582b453253d7a7b09b26cedd61bbe96f",
      "parents": [
        "121a5b8d63008db1d179ab69fc1c6b39e03d575c"
      ],
      "author": {
        "name": "Thomas Heijligen",
        "email": "thomas.heijligen@secunet.de",
        "time": "Tue Sep 21 10:00:14 2021 +0200"
      },
      "committer": {
        "name": "Nico Huber",
        "email": "nico.h@gmx.de",
        "time": "Sun Jan 29 12:29:02 2023 +0000"
      },
      "message": "remove compile guards\n\nThe build system handles the decision when to build a file.\nExtra compile guards for the source files are not necessary.\n\nChange-Id: I76a76e05c7a7dd27637325ab1e9d8946fd5f9076\nSigned-off-by: Thomas Heijligen \u003cthomas.heijligen@secunet.de\u003e\nOriginal-Reviewed-on: https://review.coreboot.org/c/flashrom/+/57797\nOriginal-Reviewed-by:  Felix Singer \u003cfelixsinger@posteo.net\u003e\nOriginal-Reviewed-by: Angel Pons \u003cth3fanbus@gmail.com\u003e\nOriginal-Reviewed-by: Nico Huber \u003cnico.h@gmx.de\u003e\nReviewed-on: https://review.coreboot.org/c/flashrom-stable/+/72260\nReviewed-by: Nico Huber \u003cnico.h@gmx.de\u003e\nTested-by: build bot (Jenkins) \u003cno-reply@coreboot.org\u003e\n"
    },
    {
      "commit": "d66dded9e302ae471f1069ab439d763418501ff1",
      "tree": "a4f8a840373c71596674ecbdf4c99f27f9408399",
      "parents": [
        "e6953e56ffd5149c721a9bfcae01bf978d8b2d51"
      ],
      "author": {
        "name": "Anastasia Klimchuk",
        "email": "aklm@chromium.org",
        "time": "Fri Aug 27 15:42:46 2021 +1000"
      },
      "committer": {
        "name": "Nico Huber",
        "email": "nico.h@gmx.de",
        "time": "Sun Jan 29 12:29:02 2023 +0000"
      },
      "message": "par_master: Use new API to register shutdown function\n\nThis allows par masters to register shutdown function in par_master\nstruct, which means there is no need to call register_shutdown in init\nfunction, since this call is now a part of register_par_master.\n\nAs a consequence of using new API, this patch also fixes propagation\nof register_par_master() return values.\n\nTested: builds and ninja test\n\nChange-Id: Ief7be907f53878b4b6567b52889735e5fff64ead\nSigned-off-by: Anastasia Klimchuk \u003caklm@chromium.org\u003e\nOriginal-Reviewed-on: https://review.coreboot.org/c/flashrom/+/57156\nOriginal-Reviewed-by: Nico Huber \u003cnico.h@gmx.de\u003e\nReviewed-on: https://review.coreboot.org/c/flashrom-stable/+/72233\nReviewed-by: Nico Huber \u003cnico.h@gmx.de\u003e\nTested-by: build bot (Jenkins) \u003cno-reply@coreboot.org\u003e\n"
    },
    {
      "commit": "b91a203091fc43824bc57f3c8e2db0bcc311da59",
      "tree": "8fffff062afae6b9ce853c69a6636bc33bcabbbc",
      "parents": [
        "03f3a6d13e8bd62ef84ef6a4a6f21d6fb8b2a7b8"
      ],
      "author": {
        "name": "Anastasia Klimchuk",
        "email": "aklm@chromium.org",
        "time": "Fri May 21 09:40:58 2021 +1000"
      },
      "committer": {
        "name": "Nico Huber",
        "email": "nico.h@gmx.de",
        "time": "Sun Jan 29 12:29:02 2023 +0000"
      },
      "message": "programmer: Smoothen register_par_master API\n\nIt was impossible to register a const struct par_master that would\npoint to dynamically allocated `data`. Fix that so that we won\u0027t\nhave to create more mutable globals.\n\nChange-Id: I95bc92f6c54c5bcdac1c522ca87054aaffed0f40\nSigned-off-by: Anastasia Klimchuk \u003caklm@chromium.org\u003e\nOriginal-Reviewed-on: https://review.coreboot.org/c/flashrom/+/54169\nOriginal-Reviewed-by: Edward O\u0027Callaghan \u003cquasisec@chromium.org\u003e\nReviewed-on: https://review.coreboot.org/c/flashrom-stable/+/72201\nReviewed-by: Nico Huber \u003cnico.h@gmx.de\u003e\nTested-by: build bot (Jenkins) \u003cno-reply@coreboot.org\u003e\n"
    },
    {
      "commit": "d42f1f65b023a4845feb1f7022eb8f2081a39b3d",
      "tree": "4c2b2af39bf959103a37efb8daa6c59270029927",
      "parents": [
        "88e87c568678ab36c997c1c807d97b3b1e7091e6"
      ],
      "author": {
        "name": "Adrien Destugues",
        "email": "adrien.destugues@opensource.viveris.fr",
        "time": "Tue Aug 10 11:48:18 2021 +0200"
      },
      "committer": {
        "name": "Nico Huber",
        "email": "nico.h@gmx.de",
        "time": "Thu Jan 05 16:35:01 2023 +0000"
      },
      "message": "nic3com: mark PCI id 9006 as supported\n\nAccording to the author of this patch, this has been tested and it\nworked.\n\nFound on https://github.com/flashrom/flashrom/pull/219.\n\nChange-Id: I88712d81b291c7ef4212bf19e284d270219fa908\nSigned-off-by: Felix Singer \u003cfelixsinger@posteo.net\u003e\nOriginal-Reviewed-on: https://review.coreboot.org/c/flashrom/+/63920\nOriginal-Reviewed-by: Angel Pons \u003cth3fanbus@gmail.com\u003e\nOriginal-Reviewed-by: Nico Huber \u003cnico.h@gmx.de\u003e\nOriginal-Reviewed-by: Thomas Heijligen \u003csrc@posteo.de\u003e\nReviewed-on: https://review.coreboot.org/c/flashrom-stable/+/71476\nReviewed-by: Nico Huber \u003cnico.h@gmx.de\u003e\nReviewed-by: Angel Pons \u003cth3fanbus@gmail.com\u003e\nTested-by: build bot (Jenkins) \u003cno-reply@coreboot.org\u003e\n"
    },
    {
      "commit": "43040f297e68cd4d826d58f57566581ef902d179",
      "tree": "a8357aba5a8dbfd43f3e7949c865f2682bf5962d",
      "parents": [
        "4203a47a102e2622f404ee6567b240882d584116"
      ],
      "author": {
        "name": "Thomas Heijligen",
        "email": "thomas.heijligen@secunet.com",
        "time": "Thu Jun 23 14:38:35 2022 +0200"
      },
      "committer": {
        "name": "Nico Huber",
        "email": "nico.h@gmx.de",
        "time": "Thu Jan 05 16:35:01 2023 +0000"
      },
      "message": "tree: indent struct *_master consistently with tabs\n\nUse `\u003ctab\u003e.key\u003ctab\u003e*\u003d \u003cvalue\u003e,`\n\nTEST: `make VERSION\u003d0 MAN_DATE\u003d0` returns the same flashrom binary\nbefore and after the patch\n\nChange-Id: I1c45ea9804ca09e040d7ac98255042f58b01f8ef\nSigned-off-by: Thomas Heijligen \u003cthomas.heijligen@secunet.com\u003e\nOriginal-Reviewed-on: https://review.coreboot.org/c/flashrom/+/65363\nOriginal-Reviewed-by: Nico Huber \u003cnico.h@gmx.de\u003e\nOriginal-Reviewed-by: Felix Singer \u003cfelixsinger@posteo.net\u003e\nReviewed-on: https://review.coreboot.org/c/flashrom-stable/+/71466\nReviewed-by: Nico Huber \u003cnico.h@gmx.de\u003e\nReviewed-by: Angel Pons \u003cth3fanbus@gmail.com\u003e\nTested-by: build bot (Jenkins) \u003cno-reply@coreboot.org\u003e\n"
    },
    {
      "commit": "cc853d84ed2f8ecafc1f6daa443f8baa4c871805",
      "tree": "8e5f3e0b7a75d272a109e20af5aeeeec11dfebf7",
      "parents": [
        "7e1345602641114c8eeb5cfef992bf1da8d7fa6a"
      ],
      "author": {
        "name": "Thomas Heijligen",
        "email": "thomas.heijligen@secunet.de",
        "time": "Tue May 04 15:32:17 2021 +0200"
      },
      "committer": {
        "name": "Nico Huber",
        "email": "nico.h@gmx.de",
        "time": "Thu Jan 05 16:15:22 2023 +0000"
      },
      "message": "programmer_table: move each entry to the associated programmer source\n\nChange-Id: I3d02bd789f0299e936eb86819b3b15b5ea2bb921\nSigned-off-by: Thomas Heijligen \u003cthomas.heijligen@secunet.de\u003e\nOriginal-Reviewed-on: https://review.coreboot.org/c/flashrom/+/52946\nOriginal-Reviewed-by: Anastasia Klimchuk \u003caklm@chromium.org\u003e\nOriginal-Reviewed-by: Nico Huber \u003cnico.h@gmx.de\u003e\nReviewed-on: https://review.coreboot.org/c/flashrom-stable/+/71373\nReviewed-by: Nico Huber \u003cnico.h@gmx.de\u003e\nReviewed-by: Angel Pons \u003cth3fanbus@gmail.com\u003e\nTested-by: build bot (Jenkins) \u003cno-reply@coreboot.org\u003e\n"
    },
    {
      "commit": "e083880279119677e443fc16b4694f8c81bf2c40",
      "tree": "03413b996779bc4c86ec41590f3e7bcdd97d0ef5",
      "parents": [
        "124ef38f7afc61ad7c713c22aad7c5c7f79bdb9b"
      ],
      "author": {
        "name": "Elyes HAOUAS",
        "email": "ehaouas@noos.fr",
        "time": "Mon Apr 02 11:14:02 2018 +0200"
      },
      "committer": {
        "name": "Nico Huber",
        "email": "nico.h@gmx.de",
        "time": "Tue Apr 24 20:21:41 2018 +0000"
      },
      "message": "Remove address from GPLv2 headers\n\nChange-Id: I7bfc339673cbf5ee2d2ff7564c4db04ca088d0a4\nSigned-off-by: Elyes HAOUAS \u003cehaouas@noos.fr\u003e\nReviewed-on: https://review.coreboot.org/25381\nTested-by: build bot (Jenkins) \u003cno-reply@coreboot.org\u003e\nReviewed-by: Nico Huber \u003cnico.h@gmx.de\u003e\n"
    },
    {
      "commit": "a5bcbceb581f27cfc0055369d3dd9cfd1ae00bfa",
      "tree": "5daecd880a16b7011be28e064fb7550f3e6b7e58",
      "parents": [
        "82b6ec1df30d3fca55547f230c76718d6e613b2a"
      ],
      "author": {
        "name": "Carl-Daniel Hailfinger",
        "email": "c-d.hailfinger.devel.2006@gmx.net",
        "time": "Sat Jul 19 22:03:29 2014 +0000"
      },
      "committer": {
        "name": "Carl-Daniel Hailfinger",
        "email": "c-d.hailfinger.devel.2006@gmx.net",
        "time": "Sat Jul 19 22:03:29 2014 +0000"
      },
      "message": "Rename programmer registration functions\n\nRegister_programmer suggests that we register a programmer. However,\nthat function registers a master for a given bus type, and a programmer\nmay support multiple masters (e.g. SPI, FWH). Rename a few other\nfunctions to be more consistent.\n\nCorresponding to flashrom svn r1831.\n\nSigned-off-by: Carl-Daniel Hailfinger \u003cc-d.hailfinger.devel.2006@gmx.net\u003e\nAcked-by: Stefan Tauner \u003cstefan.tauner@alumni.tuwien.ac.at\u003e\n"
    },
    {
      "commit": "0ccec8f21228fab9e5e57c9392f6feafbf296ef1",
      "tree": "acd2e0d426a3ec0b7829df72f6a0cbb8a9c232e2",
      "parents": [
        "72d42f87a9a01a1d27fba593ce4569331e079cbe"
      ],
      "author": {
        "name": "Stefan Tauner",
        "email": "stefan.tauner@alumni.tuwien.ac.at",
        "time": "Sun Jun 01 23:49:03 2014 +0000"
      },
      "committer": {
        "name": "Stefan Tauner",
        "email": "stefan.tauner@alumni.tuwien.ac.at",
        "time": "Sun Jun 01 23:49:03 2014 +0000"
      },
      "message": "Move global io_base_addr into compilation units\n\nCorresponding to flashrom svn r1813.\n\nSigned-off-by: Stefan Tauner \u003cstefan.tauner@alumni.tuwien.ac.at\u003e\nAcked-by: Carl-Daniel Hailfinger \u003cc-d.hailfinger.devel.2006@gmx.net\u003e\n"
    },
    {
      "commit": "89edf36c177eec2b1a2cbbcaff48c4e9a946a190",
      "tree": "20c63c2ef9a36bd6ba61248d8bbc337cf4a509e5",
      "parents": [
        "184c52c94191a354afb0cd2c91e9932e66a5cd3d"
      ],
      "author": {
        "name": "Niklas Söderlund",
        "email": "niso@kth.se",
        "time": "Fri Aug 23 23:29:23 2013 +0000"
      },
      "committer": {
        "name": "Stefan Tauner",
        "email": "stefan.tauner@alumni.tuwien.ac.at",
        "time": "Fri Aug 23 23:29:23 2013 +0000"
      },
      "message": "Add additional error handling to pcidev_readbar() callers\n\nThis is mostly a leftover of Niklas\u0027 \"remove exit call from pcidev_init\" patch.\nWhile not explicitly necessary detecting errors early is usually a good idea.\n\nCorresponding to flashrom svn r1718.\n\nSigned-off-by: Niklas Söderlund \u003cniso@kth.se\u003e\nSigned-off-by: Stefan Tauner \u003cstefan.tauner@alumni.tuwien.ac.at\u003e\nAcked-by: Stefan Tauner \u003cstefan.tauner@alumni.tuwien.ac.at\u003e\n"
    },
    {
      "commit": "a2faddf7d38e4651ce6654c62b668ab02b909b58",
      "tree": "1a13a2aa0134dbede16c017dd102efc81eb97ee0",
      "parents": [
        "c6fa32d2b5c08d2fcc92fee2974a3fc02a3ca1f7"
      ],
      "author": {
        "name": "Carl-Daniel Hailfinger",
        "email": "c-d.hailfinger.devel.2006@gmx.net",
        "time": "Sat Jan 05 23:52:45 2013 +0000"
      },
      "committer": {
        "name": "Carl-Daniel Hailfinger",
        "email": "c-d.hailfinger.devel.2006@gmx.net",
        "time": "Sat Jan 05 23:52:45 2013 +0000"
      },
      "message": "Decouple BAR reading from pci device init, handle errors gracefully\n\nPcidev_init() now returns struct pci_device * instead of a BAR stored in\nPCI config space. This allows for real error checking instead of having\nexit(1) everywhere in pcidev.c.\nThanks to Niklas Söderlund for coming up with the original error\nhandling patch which was slightly modified and folded into this patch.\nMove the declaration of struct pci_device in programmer.h before the\nfirst user.\n\nCorresponding to flashrom svn r1644.\n\nSigned-off-by: Carl-Daniel Hailfinger \u003cc-d.hailfinger.devel.2006@gmx.net\u003e\nAcked-by: Stefan Tauner \u003cstefan.tauner@alumni.tuwien.ac.at\u003e\n"
    },
    {
      "commit": "5561955b1158e8bd29299735abef1e26a5a9cdbc",
      "tree": "5284fff71cacd837b0bea9b80977dee26a08765a",
      "parents": [
        "30dfdbaf3ab30974a6d76e085525d52c033e4215"
      ],
      "author": {
        "name": "Stefan Tauner",
        "email": "stefan.tauner@alumni.tuwien.ac.at",
        "time": "Fri Jan 04 22:24:58 2013 +0000"
      },
      "committer": {
        "name": "Stefan Tauner",
        "email": "stefan.tauner@alumni.tuwien.ac.at",
        "time": "Fri Jan 04 22:24:58 2013 +0000"
      },
      "message": "Unify PCI init and let pcidev clean itself up\n\nPreviously the internal programmer used its own code to initialize pcilib.\nThis patch extracts the common code from the internal programmer and\npcidev_init() into pcidev_init_common().\nThis fixes the non-existent PCI cleanup of the internal programmer and adds\nan additional safety by checking for an already existing PCI context.\n\nWe got a nice shutdown function registration infrastructure, but did not use it\nvery wisely. Instead we added shutdown functions to a myriad of programmers\nunnecessarily. In this patch we get rid of those that do only call pci_cleanup(pacc)\nby adding a shutdown function the pcidev.c itself that gets registered by\npcidev_init().\n\nCorresponding to flashrom svn r1642.\n\nSigned-off-by: Stefan Tauner \u003cstefan.tauner@alumni.tuwien.ac.at\u003e\nAcked-by: Carl-Daniel Hailfinger \u003cc-d.hailfinger.devel.2006@gmx.net\u003e\n"
    },
    {
      "commit": "4b24a2d70b79f3288370fd5b4f472bdf218f16e8",
      "tree": "b4ba0971a1d5ff2f8e1693ae66b33e8c8cda1843",
      "parents": [
        "af358d6af23b21f93f6e27278e76eec21a3d148f"
      ],
      "author": {
        "name": "Stefan Tauner",
        "email": "stefan.tauner@alumni.tuwien.ac.at",
        "time": "Thu Dec 27 18:40:36 2012 +0000"
      },
      "committer": {
        "name": "Stefan Tauner",
        "email": "stefan.tauner@alumni.tuwien.ac.at",
        "time": "Thu Dec 27 18:40:36 2012 +0000"
      },
      "message": "Unify usbdev_status and pcidev_status into dev_entry\n\nOnce upon a time usbdev_status was created for the ft2232\nprogrammer. Its IDs are semantically different to pcidev_status\nbecause they indicate USB instead of PCI IDs, but apart from that\nboth data structures are equal. This change makes life easier for\neverything involved in handling and printing the status of devices\nthat is noted in those structures by combining them into dev_entry.\n\nIt is still possible to distinguish between PCI and USB devices\nindirectly by using the struct programmer\u0027s type field.\n\nAlso, add a programmer column to the PCI and USB devices lists.\n\nCorresponding to flashrom svn r1632.\n\nSigned-off-by: Stefan Tauner \u003cstefan.tauner@alumni.tuwien.ac.at\u003e\nAcked-by: Carl-Daniel Hailfinger \u003cc-d.hailfinger.devel.2006@gmx.net\u003e\n"
    },
    {
      "commit": "1c6d2ff03d16acf87c96d019153dcd10c779a5f6",
      "tree": "b211be01cc5f25fa78321dd434e42aafa9ea3f0e",
      "parents": [
        "6745d6f39d2642908035c7e4a6481f5349c767a7"
      ],
      "author": {
        "name": "Carl-Daniel Hailfinger",
        "email": "c-d.hailfinger.devel.2006@gmx.net",
        "time": "Mon Aug 27 00:44:42 2012 +0000"
      },
      "committer": {
        "name": "Stefan Tauner",
        "email": "stefan.tauner@alumni.tuwien.ac.at",
        "time": "Mon Aug 27 00:44:42 2012 +0000"
      },
      "message": "Some ISO C fixes\n\nThis patch just fixes a limited number of bits not conforming to c99 by using\n - __asm__ instead of just asm\n - {0} instead of {} for struct initialization\n - h_addr_list[0] instead of h_addr to access the host address in\n   struct hostent\n - #include \u003cstrings.h\u003e where needed (for ffs and strcasecmp)\n\nBased on a previous patch by Carl-Daniel.\n\nCorresponding to flashrom svn r1585.\n\nSigned-off-by: Carl-Daniel Hailfinger \u003cc-d.hailfinger.devel.2006@gmx.net\u003e\nSigned-off-by: Stefan Tauner \u003cstefan.tauner@alumni.tuwien.ac.at\u003e\nAcked-by: Carl-Daniel Hailfinger \u003cc-d.hailfinger.devel.2006@gmx.net\u003e\n"
    },
    {
      "commit": "d6bb828b017eaf89d5a4c52803ebc0029725383b",
      "tree": "722abce67e8d8864158ec9261405461a28e313b0",
      "parents": [
        "0b9af36772b655f4de118ddb296207b6ca49cb58"
      ],
      "author": {
        "name": "Carl-Daniel Hailfinger",
        "email": "c-d.hailfinger.devel.2006@gmx.net",
        "time": "Sat Jul 21 17:27:08 2012 +0000"
      },
      "committer": {
        "name": "Carl-Daniel Hailfinger",
        "email": "c-d.hailfinger.devel.2006@gmx.net",
        "time": "Sat Jul 21 17:27:08 2012 +0000"
      },
      "message": "Automatically release I/O permissions on shutdown\n\nGet_io_perms() is renamed to rget_io_perms() and automatically registers\na function to release I/O permissions on shutdown.\n\nActually release I/O permissions on Solaris and iopl()-supporting\noperating systems like Linux.\n\nThis patch fixes quite a few programmers which forgot to release I/O\npermissions on shutdown, and it simplifies the shutdown and error\nhandling code for all others.\n\nDo not call exit(1) if I/O permissions are denied and return an error\ninstead. This part of the patch was written by Niklas Söderlund.\n\nCorresponding to flashrom svn r1551.\n\nSigned-off-by: Carl-Daniel Hailfinger \u003cc-d.hailfinger.devel.2006@gmx.net\u003e\nSigned-off-by: Niklas Söderlund \u003cniso@kth.se\u003e\nAcked-by: Michael Karcher \u003cflashrom@mkarcher.dialup.fu-berlin.de\u003e\n"
    },
    {
      "commit": "32508eb304428551cff40b291d44823aafec7574",
      "tree": "0641d77a791290f6842fd60446e87871f6867651",
      "parents": [
        "3834c2d7e5a08e09e580be0dc7f9369c941b2a70"
      ],
      "author": {
        "name": "Patrick Georgi",
        "email": "patrick.georgi@secunet.com",
        "time": "Fri Jul 20 20:35:14 2012 +0000"
      },
      "committer": {
        "name": "Carl-Daniel Hailfinger",
        "email": "c-d.hailfinger.devel.2006@gmx.net",
        "time": "Fri Jul 20 20:35:14 2012 +0000"
      },
      "message": "Hide hwaccess.h from public API\n\nMove hwaccess.h #include from flash.h to individual drivers.\nlibflashrom users need flash.h, but they do not care about hwaccess.h\nand should not see its definitions because they may conflict with\nother hardware access functions and #defines used by the libflashrom\nuser.\n\nCorresponding to flashrom svn r1549.\n\nSigned-off-by: Patrick Georgi \u003cpatrick.georgi@secunet.com\u003e\nAcked-by: Carl-Daniel Hailfinger \u003cc-d.hailfinger.devel.2006@gmx.net\u003e\n"
    },
    {
      "commit": "8a3c60cdd0e5632173567923ae1927763e31e857",
      "tree": "3a5514d022392cf4d8fa368f9f02653da21a93ca",
      "parents": [
        "63fd9026f1e82b67a65072fda862ba7af35839e1"
      ],
      "author": {
        "name": "Carl-Daniel Hailfinger",
        "email": "c-d.hailfinger.devel.2006@gmx.net",
        "time": "Sun Dec 18 15:01:24 2011 +0000"
      },
      "committer": {
        "name": "Carl-Daniel Hailfinger",
        "email": "c-d.hailfinger.devel.2006@gmx.net",
        "time": "Sun Dec 18 15:01:24 2011 +0000"
      },
      "message": "Add struct flashctx * parameter to all functions accessing flash chips\n\nAll programmer access function prototypes except init have been made\nstatic and moved to the respective file.\n\nA few internal functions in flash chip drivers had chipaddr parameters\nwhich are no longer needed.\n\nThe lines touched by flashctx changes have been adjusted to 80 columns\nexcept in header files.\n\nCorresponding to flashrom svn r1474.\n\nSigned-off-by: Carl-Daniel Hailfinger \u003cc-d.hailfinger.devel.2006@gmx.net\u003e\nAcked-by: Michael Karcher \u003cflashrom@mkarcher.dialup.fu-berlin.de\u003e\n"
    },
    {
      "commit": "eaacd2d4e7485d747e4e0bbd54b7bb44cf3fd179",
      "tree": "5e023363074cbe351bc6ded9f20c3f116e6c6f1c",
      "parents": [
        "f382e352ac63108ec0f912ff52b538c99f46c340"
      ],
      "author": {
        "name": "Carl-Daniel Hailfinger",
        "email": "c-d.hailfinger.devel.2006@gmx.net",
        "time": "Wed Nov 09 23:40:00 2011 +0000"
      },
      "committer": {
        "name": "Carl-Daniel Hailfinger",
        "email": "c-d.hailfinger.devel.2006@gmx.net",
        "time": "Wed Nov 09 23:40:00 2011 +0000"
      },
      "message": "Register Parallel/LPC/FWH programmers the same way SPI programmers are registered\n\nAll programmers are now calling programmer registration functions and\ndirect manipulations of buses_supported are not needed/possible anymore.\n\nNote: Programmers without parallel/LPC/FWH chip support should not call\nregister_par_programmer().\n\nAdditional fixes:\nSet max_rom_decode.parallel for drkaiser.\nRemove abuse of programmer_map_flash_region in it85spi.\nAnnotate several FIXMEs in it85spi.\n\nCorresponding to flashrom svn r1463.\n\nSigned-off-by: Carl-Daniel Hailfinger \u003cc-d.hailfinger.devel.2006@gmx.net\u003e\nAcked-by: Michael Karcher \u003cflashrom@mkarcher.dialup.fu-berlin.de\u003e\n"
    },
    {
      "commit": "1a227954f2c7d0a25d42bcea2ea0b901ceb0f464",
      "tree": "ff9f4d8bbe04e1e80755b43b36b990b74d6845b3",
      "parents": [
        "4deb8c6a7ad0d4290cb7272a11da94139019c6ae"
      ],
      "author": {
        "name": "Carl-Daniel Hailfinger",
        "email": "c-d.hailfinger.devel.2006@gmx.net",
        "time": "Wed Jul 27 07:13:06 2011 +0000"
      },
      "committer": {
        "name": "Carl-Daniel Hailfinger",
        "email": "c-d.hailfinger.devel.2006@gmx.net",
        "time": "Wed Jul 27 07:13:06 2011 +0000"
      },
      "message": "Rename CHIP_BUSTYPE_FOO to BUS_FOO\n\nIt\u0027s shorter to type, and we have less problems with the 80 column limit.\n\nCorresponding to flashrom svn r1396.\n\nSigned-off-by: Carl-Daniel Hailfinger \u003cc-d.hailfinger.devel.2006@gmx.net\u003e\nAcked-by: Uwe Hermann \u003cuwe@hermann-uwe.de\u003e\n"
    },
    {
      "commit": "8bb2021d77c8ee213b53d671687b7a1179335522",
      "tree": "a77cc4239b59731e98cf6c9681b5a7c665613038",
      "parents": [
        "9d9a1042332cd08aa66eee6f37d80c0f09f47d70"
      ],
      "author": {
        "name": "David Hendricks",
        "email": "dhendrix@google.com",
        "time": "Tue Jun 14 01:35:36 2011 +0000"
      },
      "committer": {
        "name": "David Hendricks",
        "email": "david.hendricks@gmail.com",
        "time": "Tue Jun 14 01:35:36 2011 +0000"
      },
      "message": "Use shutdown callback mechanism to shutdown programmers\n\nThis patch attempts to resolve some programmer shutdown ordering issues\nby having the programmer init functions register shutdown callbacks explicitly\nwherever it makes most sense. Before, assumptions were made that could lead to\nthe internal programmer\u0027s state changing before the external programmer could be\nshut down properly. Now, each programmer cleans up after itself and (hopefully)\nperforms each operation in the correct order.\n\nAs a side-effect, this patch gives us a better usage model for reverse\noperations such as rpci_* and rmmio_*. In the long-run, this should make\nreversing the initialization process easier to understand, less tedious, and\nless error-prone.\n\nIn short, this patch does the following:\n- Registers a shutdown callback during initialization for each programmer.\n- Kills the .shutdown function pointer from programmer_entry struct. Also,\n  make most shutdown functions static.\n- Adds a few minor clean-ups and corrections (e.g. missing physunmap() calls).\n\nTODO: Remove forward declaration of serprog_shutdown() (added to simplify diff)\n\nCorresponding to flashrom svn r1338.\n\nSigned-off-by: David Hendricks \u003cdhendrix@google.com\u003e\nAcked-by: Carl-Daniel Hailfinger \u003cc-d.hailfinger.devel.2006@gmx.net\u003e\n"
    },
    {
      "commit": "40446eef1b52599a14b19552f5843302f38c1212",
      "tree": "381d046fea47f794966eae15695917e0f19c0eba",
      "parents": [
        "c6f71462c90cce60ad9e94d865865acbb12b75bd"
      ],
      "author": {
        "name": "Carl-Daniel Hailfinger",
        "email": "c-d.hailfinger.devel.2006@gmx.net",
        "time": "Mon Mar 07 01:08:09 2011 +0000"
      },
      "committer": {
        "name": "Carl-Daniel Hailfinger",
        "email": "c-d.hailfinger.devel.2006@gmx.net",
        "time": "Mon Mar 07 01:08:09 2011 +0000"
      },
      "message": "Remove vendorid parameter from pcidev_init()\n\nSimplify pcidev_init by killing the vendorid parameter which was pretty\nuseless anyway since it was present in the pcidevs parameter as well.\n\nThis also allows us to handle multiple programmers with different vendor\nIDs in the same driver.\n\nFix compilation of flashrom with only the nicrealtek driver.\n\nCorresponding to flashrom svn r1274.\n\nSigned-off-by: Carl-Daniel Hailfinger \u003cc-d.hailfinger.devel.2006@gmx.net\u003e\nAcked-by: Michael Karcher \u003cflashrom@mkarcher.dialup.fu-berlin.de\u003e\n"
    },
    {
      "commit": "5b997c3ed66ddbbb9470f27d4e27ab4c263bc9cf",
      "tree": "adbaace5de6bb0d97a58143c7e3ae775a15d47ff",
      "parents": [
        "1d3a2fefbc636fb569bd1d018fb97b1b17c08e99"
      ],
      "author": {
        "name": "Carl-Daniel Hailfinger",
        "email": "c-d.hailfinger.devel.2006@gmx.net",
        "time": "Tue Jul 27 22:41:39 2010 +0000"
      },
      "committer": {
        "name": "Carl-Daniel Hailfinger",
        "email": "c-d.hailfinger.devel.2006@gmx.net",
        "time": "Tue Jul 27 22:41:39 2010 +0000"
      },
      "message": "Split off programmer.h from flash.h\n\nProgrammer specific functions are of absolutely no interest to any file\nexcept those dealing with programmer specific actions (special SPI\ncommands and the generic core).\n\nThe new header structure is as follows (and yes, improvements are\npossible):\nflashchips.h  flash chip IDs\nchipdrivers.h  chip-specific read/write/... functions\nflash.h  common header for all stuff that doesn\u0027t fit elsewhere\nhwaccess.h hardware access functions\nprogrammer.h  programmer specific functions\ncoreboot_tables.h  header from coreboot, internal programmer only\nspi.h SPI command definitions\n\nCorresponding to flashrom svn r1112.\n\nSigned-off-by: Carl-Daniel Hailfinger \u003cc-d.hailfinger.devel.2006@gmx.net\u003e\nAcked-by: Uwe Hermann \u003cuwe@hermann-uwe.de\u003e\n"
    },
    {
      "commit": "744132af4b9f629716394f9c22f6add71cc73ef9",
      "tree": "46de6c5dc108fc2868603fdc606e7328a83f1703",
      "parents": [
        "d1be52d545329debd2128c1aa8685b31dfaa0a0e"
      ],
      "author": {
        "name": "Carl-Daniel Hailfinger",
        "email": "c-d.hailfinger.devel.2006@gmx.net",
        "time": "Tue Jul 06 09:55:48 2010 +0000"
      },
      "committer": {
        "name": "Carl-Daniel Hailfinger",
        "email": "c-d.hailfinger.devel.2006@gmx.net",
        "time": "Tue Jul 06 09:55:48 2010 +0000"
      },
      "message": "Various places in the flashrom source feature custom parameter extraction from programmer_param\n\nThis led to wildly differing syntax for programmer parameters, and\nit also voids pretty much every assumption you could make about\nprogrammer_param. The latter is a problem for libflashrom.\n\nUse extract_param everywhere, clean up related code and make it more\nfoolproof. Add two instances of exit(1) where we have no option to\nreturn an error. Remove six instances of exit(1) where returning an\nerror was possible.\n\nWARNING: This changes programmer parameter syntax for a few programmers!\n\nCorresponding to flashrom svn r1070.\n\nSigned-off-by: Carl-Daniel Hailfinger \u003cc-d.hailfinger.devel.2006@gmx.net\u003e\nAcked-by: Michael Karcher \u003cflashrom@mkarcher.dialup.fu-berlin.de\u003e\n"
    },
    {
      "commit": "ad3cc55e139b2e239325815464fe5f7d828aa794",
      "tree": "46568cf766d19740418be5ca8eaa494c7e69cc36",
      "parents": [
        "b63b067ae22803689592db482611093b33a29eef"
      ],
      "author": {
        "name": "Carl-Daniel Hailfinger",
        "email": "c-d.hailfinger.devel.2006@gmx.net",
        "time": "Sat Jul 03 11:02:10 2010 +0000"
      },
      "committer": {
        "name": "Carl-Daniel Hailfinger",
        "email": "c-d.hailfinger.devel.2006@gmx.net",
        "time": "Sat Jul 03 11:02:10 2010 +0000"
      },
      "message": "Kill global variables, constants and functions if local scope suffices\n\nConstify variables where possible.\nInitialize programmer-related variables explicitly in programmer_init to\nallow running programmer_init from a clean state after\nprogrammer_shutdown.\nProhibit registering programmer shutdown functions before init or after\nshutdown.\nKill some dead code.\nRename global variables with namespace-polluting names.\nUse a previously unused locking helper function in sst49lfxxxc.c.\n\nThis is needed for libflashrom.\n\nEffects on the binary size of flashrom are minimal (300 bytes\nshrinkage), but the data section shrinks by 4384 bytes, and that\u0027s a\ngood thing if flashrom is operating in constrained envionments.\n\nCorresponding to flashrom svn r1068.\n\nSigned-off-by: Carl-Daniel Hailfinger \u003cc-d.hailfinger.devel.2006@gmx.net\u003e\nAcked-by: Michael Karcher \u003cflashrom@mkarcher.dialup.fu-berlin.de\u003e\n"
    },
    {
      "commit": "02d0c1e4d0045c9d0874e0e2ea8f1c450a32989e",
      "tree": "a82bbdf5b5a27f345cc22781b736844a97a1e5ea",
      "parents": [
        "5d3fcb963300a9e44ca461f0481cb8d727556553"
      ],
      "author": {
        "name": "Peter Stuge",
        "email": "peter@stuge.se",
        "time": "Thu Jun 17 00:01:56 2010 +0000"
      },
      "committer": {
        "name": "Peter Stuge",
        "email": "peter@stuge.se",
        "time": "Thu Jun 17 00:01:56 2010 +0000"
      },
      "message": "Set maximum flash size for 3Com NICs to 128kb \u003d 1Mbit\n\nThis fact was already documented on http://flashrom.org/NIC3Com\n\nCorresponding to flashrom svn r1049.\n\nSigned-off-by: Peter Stuge \u003cpeter@stuge.se\u003e\nAcked-by: Carl-Daniel Hailfinger \u003cc-d.hailfinger.devel.2006@gmx.net\u003e\n"
    },
    {
      "commit": "831e8f4abb29f1ff66ebb8ab5ff496050ff677f7",
      "tree": "8d19ef4871587dcaf0a3a1dec562dd6ef09024b6",
      "parents": [
        "4178760241c3b3dc46a806ee3621a2eb97f4cca5"
      ],
      "author": {
        "name": "Carl-Daniel Hailfinger",
        "email": "c-d.hailfinger.devel.2006@gmx.net",
        "time": "Sun May 30 22:24:40 2010 +0000"
      },
      "committer": {
        "name": "Carl-Daniel Hailfinger",
        "email": "c-d.hailfinger.devel.2006@gmx.net",
        "time": "Sun May 30 22:24:40 2010 +0000"
      },
      "message": "Remove unneeded #include statements completely\n\nUnistd.h was only used to get a definition of NULL in all files. Add our\nown NULL #define and remove unistd.h from flash.h\nstdio.h has no place in flash.h, it should be included only in files\nwhich really need it.\nAdd #include statements in individual .c files where needed.\n\nReplace a few printf with msg_* to eliminate the need for stdio.h.\n\nCorresponding to flashrom svn r1021.\n\nSigned-off-by: Carl-Daniel Hailfinger \u003cc-d.hailfinger.devel.2006@gmx.net\u003e\nAcked-by: Uwe Hermann \u003cuwe@hermann-uwe.de\u003e\n"
    },
    {
      "commit": "cceafa2ad073fe58b10b6f2317cbd36a63d7ccb5",
      "tree": "f07a19288da12246cf3da5d886be39915cfc59a5",
      "parents": [
        "8d341b5ae774bdf8249c68944a77b72b7c4be640"
      ],
      "author": {
        "name": "Carl-Daniel Hailfinger",
        "email": "c-d.hailfinger.devel.2006@gmx.net",
        "time": "Wed May 26 01:45:41 2010 +0000"
      },
      "committer": {
        "name": "Carl-Daniel Hailfinger",
        "email": "c-d.hailfinger.devel.2006@gmx.net",
        "time": "Wed May 26 01:45:41 2010 +0000"
      },
      "message": "Handle the following architectures in generic flashrom code\n\n- x86/x86_64 (little endian)\n- PowerPC (big endian)\n- MIPS (big+little endian)\n\nNo changes to programmer specific code. This means any drivers with MMIO\naccess will _not_ suddenly start working on big endian systems, but with\nthis patch everything is in place to fix them.\n\nCompilation should work on all architectures listed above for all\ndrivers except nic3com and nicrealtek which require PCI Port IO which is\nx86-only for now.\n\nTo compile without nic3com and nicrealtek, run\nmake distclean\nmake CONFIG_NIC3COM\u003dno CONFIG_NICREALTEK\u003dno\n\nThanks to Misha Manulis for testing early versions of this patch on\nPowerPC (big endian) with the satasii programmer.\nThanks to Segher Boessenkool for design review and for helping out with\ncompiler tricks and pointing out that we need eieio on PowerPC.\nThanks to Vladimir Serbinenko for compile testing on MIPS (little\nendian) and PowerPC (big endian) and for runtime testing on MIPS (little\nendian).\nThanks to David Daney for compile testing on MIPS (big endian).\nThanks to Uwe Hermann for compile and runtime testing on x86_64.\n\nDO NOT RUN flashrom ON NON-X86 AFTER APPLYING THIS PATCH!\nThis patch only provides the infrastructure, but does not convert any\ndrivers, so flashrom will compile, but it won\u0027t do the right thing on\nnon-x86 platforms.\n\nCorresponding to flashrom svn r1013.\n\nSigned-off-by: Carl-Daniel Hailfinger \u003cc-d.hailfinger.devel.2006@gmx.net\u003e\nAcked-by: Misha Manulis \u003cmisha@manulis.com\u003e\nAcked-by: Vladimir \u0027phcoder/φ-coder\u0027 Serbinenko \u003cphcoder@gmail.com\u003e\nAcked-by: Uwe Hermann \u003cuwe@hermann-uwe.de\u003e\nAcked-by: Segher Boessenkool \u003csegher@kernel.crashing.org\u003e\n"
    },
    {
      "commit": "844863933d12ec9b9b51de440313f014a81dafbf",
      "tree": "0f6aa87fa00e980b781677209816fe0b8a9198b6",
      "parents": [
        "01f6d7d15d27ec07b86ebd0e5c34007dba3fb4c7"
      ],
      "author": {
        "name": "Michael Karcher",
        "email": "flashrom@mkarcher.dialup.fu-berlin.de",
        "time": "Wed Feb 24 00:04:40 2010 +0000"
      },
      "committer": {
        "name": "Michael Karcher",
        "email": "flashrom@mkarcher.dialup.fu-berlin.de",
        "time": "Wed Feb 24 00:04:40 2010 +0000"
      },
      "message": "Replace PCI_OK/PCI_NT by OK/NT\n\nWe don\u0027t need to duplicate OK and NT as PCI_OK and PCI_NT if the symbols\nare already there (defined for the chipset enable table).\n\nCorresponding to flashrom svn r911.\n\nSigned-off-by: Michael Karcher \u003cflashrom@mkarcher.dialup.fu-berlin.de\u003e\nAcked-by: Uwe Hermann \u003cuwe@hermann-uwe.de\u003e\n"
    },
    {
      "commit": "b0912c0adbe3d46bc49babe8c22388da7230d473",
      "tree": "6329f60d35e478942631b8f210b288e67dd96926",
      "parents": [
        "04aa59a8645510f212fc6a270b48a883f3d00fa5"
      ],
      "author": {
        "name": "TURBO J",
        "email": "turboj@gmx.de",
        "time": "Wed Sep 02 23:00:46 2009 +0000"
      },
      "committer": {
        "name": "Uwe Hermann",
        "email": "uwe@hermann-uwe.de",
        "time": "Wed Sep 02 23:00:46 2009 +0000"
      },
      "message": "Add support for parallel flash on Dr. Kaiser PC-Waechter PCI devices\n\nThe vendor sold different designs under that name, the patch works with\nthe one that has an Actel FPGA as PCI-to-Flash bridge.\n\nThe Flash chip is a \"Macronix MX29F001B\" (128 KB, parallel) soldered\ndirectly to the PCB.\nFlash operations (PROBE, READ, ERASE, WRITE) work as expected.\n\nCorresponding to flashrom svn r712.\n\nSigned-off-by: TURBO J \u003cturboj@gmx.de\u003e\nAcked-by: Uwe Hermann \u003cuwe@hermann-uwe.de\u003e\n"
    },
    {
      "commit": "fdb852f504d6a82b3031f0a67e754bf27d6d6b09",
      "tree": "e0a295f7413a2aa244c173fc80285679e9bf1e78",
      "parents": [
        "502a9137911f0cee4e2ea20cfd39deb6f27401e9"
      ],
      "author": {
        "name": "Carl-Daniel Hailfinger",
        "email": "c-d.hailfinger.devel.2006@gmx.net",
        "time": "Mon Aug 24 01:47:33 2009 +0000"
      },
      "committer": {
        "name": "Carl-Daniel Hailfinger",
        "email": "c-d.hailfinger.devel.2006@gmx.net",
        "time": "Mon Aug 24 01:47:33 2009 +0000"
      },
      "message": "\"3COM 3C90xB: PCI 10BASE-T (TPO)\" (10b7:9004) works fine\n\nReported by Mark Panajotovic \u003cpanajotovic.marko@gmail.com\u003e.\n\nCorresponding to flashrom svn r699.\n\nSigned-off-by: Carl-Daniel Hailfinger \u003cc-d.hailfinger.devel.2006@gmx.net\u003e\nAcked-by: Carl-Daniel Hailfinger \u003cc-d.hailfinger.devel.2006@gmx.net\u003e\n"
    },
    {
      "commit": "ef58a9ce3f9ae3ce0db34861f0c2d24373712138",
      "tree": "07d03ad8b91541f09b13ac709ef85e93cbc339ca",
      "parents": [
        "415e513d90042b91c1a50a9afe1282e393e574b8"
      ],
      "author": {
        "name": "Carl-Daniel Hailfinger",
        "email": "c-d.hailfinger.devel.2006@gmx.net",
        "time": "Wed Aug 12 13:32:56 2009 +0000"
      },
      "committer": {
        "name": "Carl-Daniel Hailfinger",
        "email": "c-d.hailfinger.devel.2006@gmx.net",
        "time": "Wed Aug 12 13:32:56 2009 +0000"
      },
      "message": "Use a common parameter variable for all programmers\n\nThis allows us to reduce #ifdef clauses a lot if we compile out some\nprogrammers completely.\n\nCorresponding to flashrom svn r679.\n\nSigned-off-by: Carl-Daniel Hailfinger \u003cc-d.hailfinger.devel.2006@gmx.net\u003e\nAcked-by: Stefan Reinauer \u003cstepan@coresystems.de\u003e\n"
    },
    {
      "commit": "db41c59e3ba625659e397675384b08b4ec967fe6",
      "tree": "f46b32f2d22db4fcbec9f2d33a3566f71e7dbb07",
      "parents": [
        "be726817f770572f4d950c7e572c308112a69e3b"
      ],
      "author": {
        "name": "Carl-Daniel Hailfinger",
        "email": "c-d.hailfinger.devel.2006@gmx.net",
        "time": "Sun Aug 09 21:50:24 2009 +0000"
      },
      "committer": {
        "name": "Carl-Daniel Hailfinger",
        "email": "c-d.hailfinger.devel.2006@gmx.net",
        "time": "Sun Aug 09 21:50:24 2009 +0000"
      },
      "message": "Releasing IO permissions was done by hand everywhere\n\nUse a proper abstraction. Kill unneeded #include statements.\n\nCorresponding to flashrom svn r672.\n\nSigned-off-by: Carl-Daniel Hailfinger \u003cc-d.hailfinger.devel.2006@gmx.net\u003e\nAcked-by: Stefan Reinauer \u003cstepan@coresystems.de\u003e\n"
    },
    {
      "commit": "e9d04d40ce1008ca2cd2d2ccf6e7372392bf38d0",
      "tree": "1bba4b4317be168693fed28bed621bf0ecfa6ea3",
      "parents": [
        "bc2bbd285168dc97a39e31ea9f5f49905b01c02c"
      ],
      "author": {
        "name": "Uwe Hermann",
        "email": "uwe@hermann-uwe.de",
        "time": "Tue Jun 02 19:54:22 2009 +0000"
      },
      "committer": {
        "name": "Uwe Hermann",
        "email": "uwe@hermann-uwe.de",
        "time": "Tue Jun 02 19:54:22 2009 +0000"
      },
      "message": "Mark 3COM \"3C905B: Cyclone 10/100/BNC\" as fully tested\n\nAlso do some random cleanups while I\u0027m at it.\n\nCorresponding to flashrom svn r567.\n\nSigned-off-by: Uwe Hermann \u003cuwe@hermann-uwe.de\u003e\nAcked-by: Uwe Hermann \u003cuwe@hermann-uwe.de\u003e\n"
    },
    {
      "commit": "bc2bbd285168dc97a39e31ea9f5f49905b01c02c",
      "tree": "151aacbc4c71f22000f4547d8ba05a64c66974e8",
      "parents": [
        "265c83892415bbb894a7d475f8e40b37aa1e2166"
      ],
      "author": {
        "name": "Maciej Pijanka",
        "email": "maciej.pijanka@gmail.com",
        "time": "Tue Jun 02 16:45:59 2009 +0000"
      },
      "committer": {
        "name": "Uwe Hermann",
        "email": "uwe@hermann-uwe.de",
        "time": "Tue Jun 02 16:45:59 2009 +0000"
      },
      "message": "Add support for the 10b7:9058 3COM NIC (3C905B: Cyclone 10/100/BNC)\n\nAlso, add Atmel AT29C512 support.\n\nBoth are tested on hardware by Maciej Pijanka.\n\nCorresponding to flashrom svn r566.\n\nSigned-off-by: Maciej Pijanka \u003cmaciej.pijanka@gmail.com\u003e\nAcked-by: Uwe Hermann \u003cuwe@hermann-uwe.de\u003e\n"
    },
    {
      "commit": "b22918cadc5ba07c037935644f8c6dcef0583e23",
      "tree": "c2fd7bff346e61d3433a0c0e2fe66b7173e482de",
      "parents": [
        "3504b539bfa33693510d83402a344b1eafd7a592"
      ],
      "author": {
        "name": "Carl-Daniel Hailfinger",
        "email": "c-d.hailfinger.devel.2006@gmx.net",
        "time": "Mon Jun 01 02:08:58 2009 +0000"
      },
      "committer": {
        "name": "Carl-Daniel Hailfinger",
        "email": "c-d.hailfinger.devel.2006@gmx.net",
        "time": "Mon Jun 01 02:08:58 2009 +0000"
      },
      "message": "Only probe for chips with compatible bus protocols\n\nIt doesn\u0027t make sense to probe for SPI chips on a LPC host, nor does it\nmake sense to probe for LPC chips on a Parallel host.\n\nThis change is backwards compatible, but adding host protocol info to\nchipset init functions will speed up probing.\n\nOnce all chipset init functions are updated and the Winbond W29EE011 and\nAMIC A49LF040A chip definitions are updated, the W29EE011 workaround can\nbe deleted as the W29/A49 conflict magically disappears.\n\nCorresponding to flashrom svn r560.\n\nSigned-off-by: Carl-Daniel Hailfinger \u003cc-d.hailfinger.devel.2006@gmx.net\u003e\nTested on real hardware and\nAcked-by: Uwe Hermann \u003cuwe@hermann-uwe.de\u003e\n"
    },
    {
      "commit": "c7e8a0ce1e2c5c08a43060ead373aebe62e68afe",
      "tree": "ae611f8bc7ebf9a0d135053690fba41ff509087a",
      "parents": [
        "0495c94c9b13a4d01b22704303ae4fd7895411ed"
      ],
      "author": {
        "name": "Uwe Hermann",
        "email": "uwe@hermann-uwe.de",
        "time": "Tue May 19 14:14:21 2009 +0000"
      },
      "committer": {
        "name": "Uwe Hermann",
        "email": "uwe@hermann-uwe.de",
        "time": "Tue May 19 14:14:21 2009 +0000"
      },
      "message": "Documentation improvements and small code/whitespace fixes\n\nCorresponding to flashrom svn r535.\n\nSigned-off-by: Uwe Hermann \u003cuwe@hermann-uwe.de\u003e\nAcked-by: Uwe Hermann \u003cuwe@hermann-uwe.de\u003e\n"
    },
    {
      "commit": "c6915939d962b4414b1890f6049f7fa19e1602eb",
      "tree": "046978a97e7de417a0abdc4286552a01ccb68760",
      "parents": [
        "3def09d401e2282a6296639fdf935fb0a7790b7a"
      ],
      "author": {
        "name": "Uwe Hermann",
        "email": "uwe@hermann-uwe.de",
        "time": "Sun May 17 23:12:17 2009 +0000"
      },
      "committer": {
        "name": "Uwe Hermann",
        "email": "uwe@hermann-uwe.de",
        "time": "Sun May 17 23:12:17 2009 +0000"
      },
      "message": "Factor out fallback_map/unmap, most external programmers don\u0027t need and special handling here\n\nCorresponding to flashrom svn r531.\n\nSigned-off-by: Uwe Hermann \u003cuwe@hermann-uwe.de\u003e\nAcked-by: Uwe Hermann \u003cuwe@hermann-uwe.de\u003e\n"
    },
    {
      "commit": "8403ccb49f98d1583736984c92d62735d9d466b5",
      "tree": "464c74c283c1800bb426667b9e2f1277bd743fc5",
      "parents": [
        "5820f42ef209cfa0d4070fa9be96c9c91123a93f"
      ],
      "author": {
        "name": "Uwe Hermann",
        "email": "uwe@hermann-uwe.de",
        "time": "Sat May 16 21:39:19 2009 +0000"
      },
      "committer": {
        "name": "Uwe Hermann",
        "email": "uwe@hermann-uwe.de",
        "time": "Sat May 16 21:39:19 2009 +0000"
      },
      "message": "Add proper workaround for 3COM 3C90xB cards, which need special fixups (the 3C90xC ones don\u0027t)\n\nThis is tested on hardware.\n\nAlso, add initial support for the Atmel AT29C010A chip (which I inserted\nin a 3COM 3C90xB card for testing). It can be detected, read works,\nerase works, but write will need some additional code (will post in\nanother patch later).\n\nCorresponding to flashrom svn r520.\n\nSigned-off-by: Uwe Hermann \u003cuwe@hermann-uwe.de\u003e\nAcked-by: Carl-Daniel Hailfinger \u003cc-d.hailfinger.devel.2006@gmx.net\u003e\n"
    },
    {
      "commit": "5820f42ef209cfa0d4070fa9be96c9c91123a93f",
      "tree": "a505b6f813fc4f7601f77e7195e479dfddc73571",
      "parents": [
        "4059598a068f7694f2238a3811d85cbfa520a8d5"
      ],
      "author": {
        "name": "Carl-Daniel Hailfinger",
        "email": "c-d.hailfinger.devel.2006@gmx.net",
        "time": "Sat May 16 21:22:56 2009 +0000"
      },
      "committer": {
        "name": "Carl-Daniel Hailfinger",
        "email": "c-d.hailfinger.devel.2006@gmx.net",
        "time": "Sat May 16 21:22:56 2009 +0000"
      },
      "message": "Introduce a type \"chipaddr\" to abstract the offsets within flash regions\n\nUse chipaddr instead of volatile uint8_t * because when we access chips\nin external flashers, they are not accessed via pointers at all.\n\nBenefits: This allows us to differentiate between volatile machine\nmemory accesses and flash chip accesses. It also enforces usage\nof chip_{read,write}[bwl] to access flash chips, so nobody will\nunintentionally use pointers to access chips anymore. Some unneeded\ncasts are removed as well. Grepping for chip operations and machine\nmemory operations doesn\u0027t yield any false positives anymore.\n\nCompile tested on 32 bit and 64 bit Linux.\n\nCorresponding to flashrom svn r519.\n\nSigned-off-by: Carl-Daniel Hailfinger \u003cc-d.hailfinger.devel.2006@gmx.net\u003e\nAcked-by: Uwe Hermann \u003cuwe@hermann-uwe.de\u003e\n"
    },
    {
      "commit": "9ee107721f746b0b81dcacf2f59c4f48d4210b9e",
      "tree": "7e77126eedcc62dbf83c65cb365d597b7cbb1d03",
      "parents": [
        "9862251f8985237445de98060b2fb319c2d6d519"
      ],
      "author": {
        "name": "Carl-Daniel Hailfinger",
        "email": "c-d.hailfinger.devel.2006@gmx.net",
        "time": "Sat May 16 01:23:55 2009 +0000"
      },
      "committer": {
        "name": "Carl-Daniel Hailfinger",
        "email": "c-d.hailfinger.devel.2006@gmx.net",
        "time": "Sat May 16 01:23:55 2009 +0000"
      },
      "message": "Add generic 16 bit and 32 bit chip read/write emulation to the external flasher infrastructure\n\nThe emulation works by splitting 32 bit accesses into 16 bit accesses\nand 16 bit accesses into to 8 bit accesses. That way, external flashers\ncan mix and match the amount of emulation they need.\n\nCorresponding to flashrom svn r517.\n\nSigned-off-by: Carl-Daniel Hailfinger \u003cc-d.hailfinger.devel.2006@gmx.net\u003e\nAcked-by: Uwe Hermann \u003cuwe@hermann-uwe.de\u003e\n"
    },
    {
      "commit": "515ab3de05f81253b94e7dd659f09c50724fb830",
      "tree": "5853f36678a033a13606412ac1d1d1fdc2f35b00",
      "parents": [
        "1e637844d58ed05e9b1c3fbffc5811b66bc0a0ad"
      ],
      "author": {
        "name": "Uwe Hermann",
        "email": "uwe@hermann-uwe.de",
        "time": "Fri May 15 17:02:34 2009 +0000"
      },
      "committer": {
        "name": "Uwe Hermann",
        "email": "uwe@hermann-uwe.de",
        "time": "Fri May 15 17:02:34 2009 +0000"
      },
      "message": "Refactor parts of the 3COM NIC code\n\nMove the reusable PCI specific parts into pcidev.c, they\u0027ll be usable\nfor other NIC code (Realtek, VIA, ...) and also for SATA/IDE controller\ncards as external programmers (for every PCI device which can program\nEEPROMs basically).\n\nAlso add print_supported_pcidevs() to show the supported PCI devices\n(currently only NICs, soon more) in the \u0027flashrom -L\u0027 output.\n\nCorresponding to flashrom svn r515.\n\nSigned-off-by: Uwe Hermann \u003cuwe@hermann-uwe.de\u003e\nAcked-by: Carl-Daniel Hailfinger \u003cc-d.hailfinger.devel.2006@gmx.net\u003e\n"
    },
    {
      "commit": "530cb2d4f16c110d12852ecbb0d48860eb99bf5e",
      "tree": "a6b990b8d29e399ce20e888410f631e13061faa6",
      "parents": [
        "3b7e75a23e0d9f812e7e7792734846720dbfd648"
      ],
      "author": {
        "name": "Uwe Hermann",
        "email": "uwe@hermann-uwe.de",
        "time": "Thu May 14 22:58:21 2009 +0000"
      },
      "committer": {
        "name": "Uwe Hermann",
        "email": "uwe@hermann-uwe.de",
        "time": "Thu May 14 22:58:21 2009 +0000"
      },
      "message": "Make the nic3com code check how many supported NICs are found\n\nIf we find multiple ones, abort with a message to the user, suggesting\nto use the\n\n  flashrom -p nic3com\u003dbb:dd.f\n\nsyntax. If exactly one supported NIC is found, use it. If none is found,\nabort with an error.\n\nPrint the bb:dd.f numbers for all supported NICs we find, so the user\ndoesn\u0027t have to poke around in lspci output to find the desired bb:dd.f.\n\nAlso, drop one pci_read_long() in favor of using the already existing\nbase_addr[0] struct field.\n\nDrop the BAR in user messages, it\u0027s not really useful for us. Instead,\nexplain the BDF syntax a bit more verbosely.\n\nWhile I\u0027m at it, update the manpage some more to mention and fully\ndocument the external programmer support we have (or will have soon).\n\nThe patch is tested on hardware:\n\n$ flashrom -p nic3com flashrom v0.9.0-r512 Found NIC \"3COM 3C905C:\nEtherLink 10/100 PCI (TX)\" (10b7:9200, BDF 05:04.0) Found NIC \"3COM\n3C905C: EtherLink 10/100 PCI (TX)\" (10b7:9200, BDF 05:03.0) Error:\nMultiple supported NICs found. Please use \u0027flashrom -p nic3com\u003dbb:dd.f\u0027\nto explicitly select the card with the given BDF (PCI bus, device,\nfunction).\n\n$ flashrom -p nic3com\u003d05:04.0 flashrom v0.9.0-r512 Found NIC \"3COM\n3C905C: EtherLink 10/100 PCI (TX)\" (10b7:9200, BDF 05:04.0) Calibrating\ndelay loop... OK. Found chip \"Atmel AT49BV512\" (64 KB) at physical\naddress 0xffff0000. No operations were specified.\n\nCorresponding to flashrom svn r513.\n\nSigned-off-by: Uwe Hermann \u003cuwe@hermann-uwe.de\u003e\nAcked-by: Carl-Daniel Hailfinger \u003cc-d.hailfinger.devel.2006@gmx.net\u003e\n"
    },
    {
      "commit": "3b7e75a23e0d9f812e7e7792734846720dbfd648",
      "tree": "423ccc8f7ca6cba97d39c1649e7da245a202caf8",
      "parents": [
        "a086932cf928c6a084dd4d71a67cd8db742de5ec"
      ],
      "author": {
        "name": "Carl-Daniel Hailfinger",
        "email": "c-d.hailfinger.devel.2006@gmx.net",
        "time": "Thu May 14 21:41:10 2009 +0000"
      },
      "committer": {
        "name": "Carl-Daniel Hailfinger",
        "email": "c-d.hailfinger.devel.2006@gmx.net",
        "time": "Thu May 14 21:41:10 2009 +0000"
      },
      "message": "Fix compilation of nic3com on 64bit\n\nCorresponding to flashrom svn r512.\n\nSigned-off-by: Carl-Daniel Hailfinger \u003cc-d.hailfinger.devel.2006@gmx.net\u003e\nAcked-by: Uwe Hermann \u003cuwe@hermann-uwe.de\u003e\n"
    },
    {
      "commit": "a086932cf928c6a084dd4d71a67cd8db742de5ec",
      "tree": "d002290fdd64e4adca0ad8a00e16821e987347cb",
      "parents": [
        "0cdb0313f171d80b13f02014ad4987b84c935a83"
      ],
      "author": {
        "name": "Uwe Hermann",
        "email": "uwe@hermann-uwe.de",
        "time": "Thu May 14 20:41:57 2009 +0000"
      },
      "committer": {
        "name": "Uwe Hermann",
        "email": "uwe@hermann-uwe.de",
        "time": "Thu May 14 20:41:57 2009 +0000"
      },
      "message": "Unify usage of iopl-like code by introducing get_io_perms()\n\nFactor out portable iopl()-style code into a global function which all\nprogrammers can use, add missing close() call.\n\nCorresponding to flashrom svn r511.\n\nSigned-off-by: Uwe Hermann \u003cuwe@hermann-uwe.de\u003e\nAcked-by: Uwe Hermann \u003cuwe@hermann-uwe.de\u003e\n"
    },
    {
      "commit": "0cdb0313f171d80b13f02014ad4987b84c935a83",
      "tree": "3dea3b3bf5e588ca0afd0d76aab57f65ab0b8f06",
      "parents": [
        "c2a9c9c5fd791d8fb2a85e726b80f44f2b28759e"
      ],
      "author": {
        "name": "Christian Ruppert",
        "email": "spooky85@gmail.com",
        "time": "Thu May 14 18:57:26 2009 +0000"
      },
      "committer": {
        "name": "Uwe Hermann",
        "email": "uwe@hermann-uwe.de",
        "time": "Thu May 14 18:57:26 2009 +0000"
      },
      "message": "nic3com: allow selection of a particular PCI device to use as programmer\n\nAdd support for users to specify a certain NIC via PCI bus:slot.func\nnotation, in case there are multiple NICs in one system.\n\nUsage: flashrom -p nic3com\u003dbb:ss.f\n\nCorresponding to flashrom svn r510.\n\nSigned-off-by: Christian Ruppert \u003cspooky85@gmail.com\u003e\nAcked-by: Uwe Hermann \u003cuwe@hermann-uwe.de\u003e\n"
    },
    {
      "commit": "92c53eef8e9e3faa581e4563146ef3464ff8211f",
      "tree": "56befb80e7f08d3fa51c00e071824ea7885dd545",
      "parents": [
        "3e9dbea1ce9c94a879deccc48bd72c60eb4b3454"
      ],
      "author": {
        "name": "Uwe Hermann",
        "email": "uwe@hermann-uwe.de",
        "time": "Wed May 13 12:01:57 2009 +0000"
      },
      "committer": {
        "name": "Uwe Hermann",
        "email": "uwe@hermann-uwe.de",
        "time": "Wed May 13 12:01:57 2009 +0000"
      },
      "message": "Fix nic3com.c build issues on *BSD\n\nCorresponding to flashrom svn r501.\n\nSigned-off-by: Uwe Hermann \u003cuwe@hermann-uwe.de\u003e\nAcked-by: Uwe Hermann \u003cuwe@hermann-uwe.de\u003e\n"
    },
    {
      "commit": "b4dcb7188ff557c6722f862a61e806f901c17889",
      "tree": "da5272689632779b482a959fc745c23c90da7494",
      "parents": [
        "01624f40eeec33c546150a240f194f057f6dd36e"
      ],
      "author": {
        "name": "Uwe Hermann",
        "email": "uwe@hermann-uwe.de",
        "time": "Wed May 13 11:36:06 2009 +0000"
      },
      "committer": {
        "name": "Uwe Hermann",
        "email": "uwe@hermann-uwe.de",
        "time": "Wed May 13 11:36:06 2009 +0000"
      },
      "message": "Add support for 3COM NICs as \"external programmer\" and Atmel AT49BV512\n\nThis allows flashrom to identify, read, write, erase and verify flash chips\non (some) 3COM network cards. The patch uses the external programmer\ninfrastructure, the network card is basically treated as an external\nflash programmer.\n\nUsage:\n\n$ ./flashrom -p nic3com\nflashrom v0.9.0-r498\nFound NIC \"3COM 3C905C: EtherLink 10/100 PCI (TX)\" (10b7:9200), addr \u003d 0xa400\nCalibrating delay loop... OK.\nFound chip \"Atmel AT49BV512\" (64 KB) at physical address 0xffff0000.\nNo operations were specified.\n\n$ ./flashrom -p nic3com -E\nflashrom v0.9.0-r498\nFound NIC \"3COM 3C905C: EtherLink 10/100 PCI (TX)\" (10b7:9200), addr \u003d 0xa400\nCalibrating delay loop... OK.\nFound chip \"Atmel AT49BV512\" (64 KB) at physical address 0xffff0000.\nErasing flash chip... SUCCESS.\n\n$ ./flashrom -p nic3com -wv backup.bin\nflashrom v0.9.0-r498\nFound NIC \"3COM 3C905C: EtherLink 10/100 PCI (TX)\" (10b7:9200), addr \u003d 0xa400\nCalibrating delay loop... OK.\nFound chip \"Atmel AT49BV512\" (64 KB) at physical address 0xffff0000.\nFlash image seems to be a legacy BIOS. Disabling checks.\nProgramming page: 1023 at address: 0x0000ffc0\nVerifying flash... VERIFIED.\n\n$ ./flashrom -p nic3com -r backup.bin\nflashrom v0.9.0-r498\nFound NIC \"3COM 3C905C: EtherLink 10/100 PCI (TX)\" (10b7:9200), addr \u003d 0xa400\nCalibrating delay loop... OK.\nFound chip \"Atmel AT49BV512\" (64 KB) at physical address 0xffff0000.\nReading flash... done.\n\nI have tested this on actual hardware (see PCI IDs above) and all\noperations worked fine.\n\nSupport for other 3COM cards will follow (I added some more which should\nbe supportable by this code, but they\u0027re untested so far), as well as\nsupport for NICs from other vendors.\n\nThe patch also adds support for the Atmel AT49BV512 which is soldered\nonto the 3COM NIC I used for testing.\n\nCorresponding to flashrom svn r499.\n\nSigned-off-by: Uwe Hermann \u003cuwe@hermann-uwe.de\u003e\nAcked-by: Mateusz Murawski \u003cmatowy@tlen.pl\u003e\nAcked-by: Carl-Daniel Hailfinger \u003cc-d.hailfinger.devel.2006@gmx.net\u003e\n"
    }
  ]
}