)]}' { "log": [ { "commit": "610c1aad71bfa118c4f49ac01761f586b8dede69", "tree": "8ad4cfd904cf909526b32b03561ad369f42720d9", "parents": [ "b95fe9b9751746b269a3bbd7021cf731d8553715" ], "author": { "name": "Nico Huber", "email": "nico.h@gmx.de", "time": "Wed Feb 15 02:56:05 2023 +0100" }, "committer": { "name": "Nico Huber", "email": "nico.h@gmx.de", "time": "Sun Mar 15 14:27:20 2026 +0000" }, "message": "spi: Pass master instead of flash to .send_command\n\nIn the SPI-master API, `.send_command` should only forward commands to\nthe SPI bus. All details about the commands and the SPI slave should be\nhandled in the chip driver. Hence, replace the `flashctx` pointer with\none to the `spi_master` to enforce proper separation.\n\nChange-Id: I50934a1294217794b7e23cc98ade7e4279c059a1\nSigned-off-by: Nico Huber \u003cnico.h@gmx.de\u003e\nReviewed-on: https://review.sourcearcade.org/c/flashprog/+/74897\nReviewed-by: Arthur Heymans \u003carthur@aheymans.xyz\u003e\n" }, { "commit": "9a11cbf21a5078bcdb8db7584c44a9ee17020db4", "tree": "e67a9eadfdb7a71f81df36c7e97180474a8c59df", "parents": [ "aabb3e0ff54e87c0136c91f105e506ed19184cc6" ], "author": { "name": "Nico Huber", "email": "nico.h@gmx.de", "time": "Fri Jan 13 01:19:07 2023 +0100" }, "committer": { "name": "Nico Huber", "email": "nico.h@gmx.de", "time": "Sat Mar 09 10:40:04 2024 +0000" }, "message": "Let the flash context directly point to the used master\n\nWe used to have a pointer to a full `registered_master` struct in\nour flash context. Beside the used master, this contained a bit\nmask of supported buses. Oddly convenient, this bit mask invited\nto bypass the chip driver and break the abstraction. It allowed\nto place bus-specific details virtually anywhere in flashprog,\nmaking it harder to find a good place for them.\n\nSo, get rid of the `buses_supported` bit mask by pointing directly\nto the master. Only the chip driver will implicitly know which type\nof master is used.\n\nChange-Id: I9ce13d8df0e7ccc67519d888dd9cb2e2ff8d6682\nSigned-off-by: Nico Huber \u003cnico.h@gmx.de\u003e\nReviewed-on: https://review.sourcearcade.org/c/flashprog/+/72533\n" }, { "commit": "89569d60e3aeeec651496b2e7a2e6064d782ab3b", "tree": "bf0c3951886de60086d32ff6e1a850adad926da6", "parents": [ "929d2e1b17a448d3352dbecb6a620ee0c1e65a58" ], "author": { "name": "Nico Huber", "email": "nico.h@gmx.de", "time": "Thu Jan 12 23:31:40 2023 +0100" }, "committer": { "name": "Nico Huber", "email": "nico.h@gmx.de", "time": "Sat Mar 09 10:30:24 2024 +0000" }, "message": "memory_mapped: Reduce `decode_sizes` to a single `max_rom_decode`\n\nWe used to store the maximum decode size, i.e. the maximum memory-mapped\nrange of the flash chip, per bus type (Parallel, LPC, FWH, SPI). There\nwas no programmer in the tree that really made use of it, though:\n* The chipset drivers usually focus on a single bus type. And even if\n they advertise the whole default set (PAR, LPC, FWH), they only pro-\n vide a maximum decode size for one of them. The latter is probably\n wrong, should really more than one bus type be supported.\n* PCI and external programmers all support only a single bus type, with\n the exception of `serprog` which doesn\u0027t set a maximum decode size.\n\nWhat made the distinction even less useful is that for some chips that\nsupport multiple bus types, i.e. LPC+FWH, we can\u0027t even detect which\ntype it is. The existing code around this also only tried to provide\nthe best possible warning message at the expense of breaking the pro-\ngrammer abstraction.\n\nHence, unify the set of sizes into a single `max_rom_decode` property.\nWe store it inside the `registered_master` struct right away, to avoid\nany more use of globals.\n\nChange-Id: I2aaea18d5b4255eb843a625b016ee74bb145ed85\nSigned-off-by: Nico Huber \u003cnico.h@gmx.de\u003e\nReviewed-on: https://review.sourcearcade.org/c/flashprog/+/72531\n" }, { "commit": "e3a26888e14d16592c2c79d1516828d3d32961a4", "tree": "02d401e60defd27fe7bee194978bac782284cb39", "parents": [ "2b66ad9c4465432e6f2aff2e95f1e7a556bfc3f0" ], "author": { "name": "Nico Huber", "email": "nico.h@gmx.de", "time": "Wed Jan 11 21:45:51 2023 +0100" }, "committer": { "name": "Nico Huber", "email": "nico.h@gmx.de", "time": "Sat Mar 09 10:30:24 2024 +0000" }, "message": "Pass programmer context to programmer-\u003einit()\n\nChange-Id: I064eb4e25c3d382e4e5bde802306698fafe5e1d0\nSigned-off-by: Nico Huber \u003cnico.h@gmx.de\u003e\nReviewed-on: https://review.sourcearcade.org/c/flashprog/+/72526\n" }, { "commit": "0cea753aff33b78051febadf8786df83144b5ee7", "tree": "8972ea6cf44e249659ddad7ea3d9aa2dedffc0b6", "parents": [ "ab9f25893f1fa87cbbaf656869e346391eccdb31" ], "author": { "name": "Aarya Chaumal", "email": "aarya.chaumal@gmail.com", "time": "Mon Jul 04 18:21:50 2022 +0530" }, "committer": { "name": "Nico Huber", "email": "nico.h@gmx.de", "time": "Sun Feb 19 13:50:18 2023 +0000" }, "message": "spi: Add function to probe erase command opcode for all spi_master\n\nAdd a field, probe_opcode, to struct spi_master which points to a\nfunction returning a bool by checking if a given command is supported by\nthe programmer in use. This is used for getting a whitelist of commands\nsupported by the programmer, as some programmers like ichspi don\u0027t\nsupport all opcodes.\n\nMost programmers use the default function, which just returns true.\nICHSPI and dummyflasher use their specialized function.\n\nflashrom-stable: Added `.probe_opcode` for `dirtyjtag_spi`, `ich7`.\n\nChange-Id: I6852ef92788221f471a859c879f8aff42558d36d\nSigned-off-by: Aarya Chaumal \u003caarya.chaumal@gmail.com\u003e\nOriginal-Reviewed-on: https://review.coreboot.org/c/flashrom/+/65183\nOriginal-Reviewed-by: Thomas Heijligen \u003csrc@posteo.de\u003e\nOriginal-Reviewed-by: Anastasia Klimchuk \u003caklm@chromium.org\u003e\nOriginal-Reviewed-by: Nico Huber \u003cnico.h@gmx.de\u003e\nOriginal-Reviewed-by: Felix Singer \u003cfelixsinger@posteo.net\u003e\nReviewed-on: https://review.coreboot.org/c/flashrom-stable/+/72539\nTested-by: build bot (Jenkins) \u003cno-reply@coreboot.org\u003e\nReviewed-by: Nico Huber \u003cnico.h@gmx.de\u003e\n" }, { "commit": "0b587f921aebd36aaa9f69faea0d2601386d7379", "tree": "c13c57f89dd385d3ed1bd76893cf7a251f8eba1a", "parents": [ "7310f19a07d70a16a0e6342ceb538854729282cd" ], "author": { "name": "Edward O\u0027Callaghan", "email": "quasisec@google.com", "time": "Fri Sep 09 23:01:05 2022 +1000" }, "committer": { "name": "Nico Huber", "email": "nico.h@gmx.de", "time": "Sun Jan 29 12:29:02 2023 +0000" }, "message": "spi: Make \u0027default_spi_write_aai\u0027 the default unless defined\n\nA NULL func pointer is necessary and sufficient for the\ncondition `NULL func pointer \u003d\u003e default_spi_write_aai\u0027 as to not\nneed this explicit specification of \u0027default\u0027.\n\nTherefore drop the explicit need to specify the \u0027default_spi_write_aai\u0027\ncallback function pointer in the spi_master struct. This is a reasonable\ndefault for every other driver in the tree with only a few exceptions.\n\nThis simplifies the code and driver development.\n\nflashrom-stable: Updated `dirtyjtag_spi` which was added earlier.\n\nChange-Id: I7f14aaea0edcf0c08cea0e9cd27d58152707fb2a\nSigned-off-by: Edward O\u0027Callaghan \u003cquasisec@google.com\u003e\nOriginal-Reviewed-on: https://review.coreboot.org/c/flashrom/+/67479\nOriginal-Reviewed-by: Peter Marheine \u003cpmarheine@chromium.org\u003e\nOriginal-Reviewed-by: Anastasia Klimchuk \u003caklm@chromium.org\u003e\nOriginal-Reviewed-by: Felix Singer \u003cfelixsinger@posteo.net\u003e\nReviewed-on: https://review.coreboot.org/c/flashrom-stable/+/72369\nTested-by: build bot (Jenkins) \u003cno-reply@coreboot.org\u003e\nReviewed-by: Nico Huber \u003cnico.h@gmx.de\u003e\n" }, { "commit": "621208c341cb400b9b13b5874da49504818a9f49", "tree": "1a851dd54e96add7fe6e30de98fe3b5e4424a775", "parents": [ "56684d9a2ed8a0f878472d5aa0518a3200526812" ], "author": { "name": "Edward O\u0027Callaghan", "email": "quasisec@google.com", "time": "Wed Sep 07 22:21:39 2022 +1000" }, "committer": { "name": "Nico Huber", "email": "nico.h@gmx.de", "time": "Sun Jan 29 12:29:02 2023 +0000" }, "message": "drivers/: Make \u0027fallback_{un}map\u0027 the default unless defined\n\nDrop the explicit need to specify the default \u0027fallback_{un}map\u0027\ncallback function pointer from the \u0027programmer_entry\u0027 struct.\nThis is a reasonable default for every other driver in the tree\nwith only a select few exceptions [atavia, serprog, dummyflasher\nand internal].\n\nThus this simplifies driver development and paves way\nto remove the \u0027programmer\u0027 global handle.\n\nflashrom-stable: Updated `dirtyjtag_spi` which was added earlier.\n\nChange-Id: I5ea7bd68f7ae2cd4af9902ef07255ab6ce0bfdb3\nSigned-off-by: Edward O\u0027Callaghan \u003cquasisec@google.com\u003e\nOriginal-Reviewed-on: https://review.coreboot.org/c/flashrom/+/67404\nOriginal-Reviewed-by: Felix Singer \u003cfelixsinger@posteo.net\u003e\nOriginal-Reviewed-by: Anastasia Klimchuk \u003caklm@chromium.org\u003e\nOriginal-Reviewed-by: Angel Pons \u003cth3fanbus@gmail.com\u003e\nReviewed-on: https://review.coreboot.org/c/flashrom-stable/+/72360\nTested-by: build bot (Jenkins) \u003cno-reply@coreboot.org\u003e\nReviewed-by: Nico Huber \u003cnico.h@gmx.de\u003e\n" }, { "commit": "56684d9a2ed8a0f878472d5aa0518a3200526812", "tree": "020c2d8db0e05a74981b5b381c37febd46fb796d", "parents": [ "78ed668a924db5dd78c3530655127f895728fe59" ], "author": { "name": "Edward O\u0027Callaghan", "email": "quasisec@google.com", "time": "Wed Sep 07 10:47:45 2022 +1000" }, "committer": { "name": "Nico Huber", "email": "nico.h@gmx.de", "time": "Sun Jan 29 12:29:02 2023 +0000" }, "message": "drivers/: Make \u0027internal_delay\u0027 the default unless defined\n\nDrop the explicit need to specify the default \u0027internal_delay\u0027\ncallback function pointer in the programmer_entry struct.\nThis is a reasonable default for every other driver in the\ntree with only the two exceptions of ch341a_spi.c and serprog.c.\n\nThus this simplifies driver development.\n\nflashrom-stable: Updated `dirtyjtag_spi` which was added earlier.\n\nChange-Id: I17460bc2c0aebcbb48c8dfa052b260991525cc49\nSigned-off-by: Edward O\u0027Callaghan \u003cquasisec@google.com\u003e\nOriginal-Reviewed-on: https://review.coreboot.org/c/flashrom/+/67391\nOriginal-Reviewed-by: Peter Marheine \u003cpmarheine@chromium.org\u003e\nOriginal-Reviewed-by: Angel Pons \u003cth3fanbus@gmail.com\u003e\nOriginal-Reviewed-by: Thomas Heijligen \u003csrc@posteo.de\u003e\nOriginal-Reviewed-by: Felix Singer \u003cfelixsinger@posteo.net\u003e\nOriginal-Reviewed-by: Nikolai Artemiev \u003cnartemiev@google.com\u003e\nReviewed-on: https://review.coreboot.org/c/flashrom-stable/+/72359\nTested-by: build bot (Jenkins) \u003cno-reply@coreboot.org\u003e\nReviewed-by: Nico Huber \u003cnico.h@gmx.de\u003e\n" }, { "commit": "c63d9184aaef45d5a970f045ae901bf9f7221108", "tree": "424ae7b122e2ff722d5fdf3ba486b701bd9bd052", "parents": [ "72c02ff4b0ea4111d4f2632ba102506683607749" ], "author": { "name": "Anastasia Klimchuk", "email": "aklm@chromium.org", "time": "Tue Jul 06 16:18:44 2021 +1000" }, "committer": { "name": "Nico Huber", "email": "nico.h@gmx.de", "time": "Sun Jan 29 12:29:02 2023 +0000" }, "message": "spi_master: Use new API to register shutdown function\n\nThis allows spi masters to register shutdown function in spi_master\nstruct, which means there is no need to call register_shutdown in init\nfunction, since this call is now a part of register_spi_master.\n\nAs a consequence of using new API, two things are happening here:\n1) No resource leakage anymore in case register_shutdown() would fail,\n2) Fixed propagation of register_spi_master() return values.\n\nBasic testing: when I comment out free(data) in linux_spi_shutdown, test\nfails with error\n../linux_spi.c:235: note: block 0x55a4db276510 allocated here\nERROR: linux_spi_init_and_shutdown_test_success leaked 1 block(s)\nMeans, shutdown function is invoked.\n\nTested: 1) builds and ninja test including CB:56911\n2) On ARMv7 device\nflashrom -p linux_spi -V\n-\u003e using linux_spi, chip found\n3) On x86_64 AMD device\nflashrom -p internal -V\n-\u003e this is actually using sb600spi, chip found\n\nflashrom-stable: Updated `dirtyjtag_spi` which was added earlier.\n\nChange-Id: Ib60300f9ddb295a255d5ef3f8da0e07064207140\nSigned-off-by: Anastasia Klimchuk \u003caklm@chromium.org\u003e\nOriginal-Reviewed-on: https://review.coreboot.org/c/flashrom/+/56103\nOriginal-Reviewed-by: Nico Huber \u003cnico.h@gmx.de\u003e\nOriginal-Reviewed-by: Angel Pons \u003cth3fanbus@gmail.com\u003e\nOriginal-Reviewed-by: Edward O\u0027Callaghan \u003cquasisec@chromium.org\u003e\nReviewed-on: https://review.coreboot.org/c/flashrom-stable/+/72231\nTested-by: build bot (Jenkins) \u003cno-reply@coreboot.org\u003e\nReviewed-by: Nico Huber \u003cnico.h@gmx.de\u003e\n" }, { "commit": "03f3a6d13e8bd62ef84ef6a4a6f21d6fb8b2a7b8", "tree": "0fc0ec55b781d30d58a9b2fbc4b2e0c1ec83aab2", "parents": [ "5e08e3e829e3f736e18cef7b8f4a8929c9e06257" ], "author": { "name": "Nico Huber", "email": "nico.h@gmx.de", "time": "Tue May 11 17:53:34 2021 +0200" }, "committer": { "name": "Nico Huber", "email": "nico.h@gmx.de", "time": "Sun Jan 29 12:29:02 2023 +0000" }, "message": "programmer: Make use of new register_spi_master() API\n\nPass pointers to dynamically allocated data to register_spi_master().\nThis way we can avoid some mutable globals.\n\nflashrom-stable: Updated `dirtyjtag_spi` and `dediprog`\n that were added/refactored earlier.\n\nChange-Id: Id7821f1db3284b7b5b3d0abfd878b979c53870a1\nSigned-off-by: Nico Huber \u003cnico.h@gmx.de\u003e\nOriginal-Reviewed-on: https://review.coreboot.org/c/flashrom/+/54067\nOriginal-Reviewed-by: Angel Pons \u003cth3fanbus@gmail.com\u003e\nReviewed-on: https://review.coreboot.org/c/flashrom-stable/+/72200\nTested-by: build bot (Jenkins) \u003cno-reply@coreboot.org\u003e\n" }, { "commit": "5e08e3e829e3f736e18cef7b8f4a8929c9e06257", "tree": "cfe9483275582e2ff2a50628824cf8e842c1feef", "parents": [ "6c33185c81f4aab0d048be7c4b68dca1a91800c2" ], "author": { "name": "Nico Huber", "email": "nico.h@gmx.de", "time": "Tue May 11 17:38:14 2021 +0200" }, "committer": { "name": "Nico Huber", "email": "nico.h@gmx.de", "time": "Sun Jan 29 12:29:02 2023 +0000" }, "message": "programmer: Smoothen register_spi_master() API\n\nIt was impossible to register a const struct spi_master that would\npoint to dynamically allocated `data`. Fix that so that we won\u0027t\nhave to create more mutable globals.\n\nChange-Id: I0c753b3db050fb87d4bbe2301a7ead854f28456f\nSigned-off-by: Nico Huber \u003cnico.h@gmx.de\u003e\nOriginal-Reviewed-on: https://review.coreboot.org/c/flashrom/+/54066\nOriginal-Reviewed-by: Anastasia Klimchuk \u003caklm@chromium.org\u003e\nOriginal-Reviewed-by: Angel Pons \u003cth3fanbus@gmail.com\u003e\nReviewed-on: https://review.coreboot.org/c/flashrom-stable/+/72179\nTested-by: build bot (Jenkins) \u003cno-reply@coreboot.org\u003e\n" }, { "commit": "e4a9791b04627b4fcb0540cf5e2e60d9c4737128", "tree": "1e32867b9214ce906b091f9e352c7337ee6d648e", "parents": [ "2a329665800a7f2c74414bff75f225a9e28eda47" ], "author": { "name": "Anastasia Klimchuk", "email": "aklm@chromium.org", "time": "Mon Apr 26 10:58:16 2021 +1000" }, "committer": { "name": "Nico Huber", "email": "nico.h@gmx.de", "time": "Sun Jan 22 00:55:18 2023 +0000" }, "message": "jlink_spi.c: Drop jaylink_ prefix for spi data struct members\n\nSince jaylink context and jaylink device handle are not global\nvariables anymore, but members of the struct jlink_spi_data,\njaylink_ prefix can be dropped from members names and moved to\nstruct variable name. Follow up on 52560.\n\nChange-Id: If6e68e0dabb6bfad1088ff975445961294bbc03d\nSigned-off-by: Anastasia Klimchuk \u003caklm@chromium.org\u003e\nOriginal-Reviewed-on: https://review.coreboot.org/c/flashrom/+/52661\nOriginal-Tested-by: Nico Huber \u003cnico.h@gmx.de\u003e\nOriginal-Reviewed-by: Edward O\u0027Callaghan \u003cquasisec@chromium.org\u003e\nOriginal-Reviewed-by: Miklós Márton \u003cmartonmiklosqdev@gmail.com\u003e\nReviewed-on: https://review.coreboot.org/c/flashrom-stable/+/72173\nTested-by: build bot (Jenkins) \u003cno-reply@coreboot.org\u003e\nReviewed-by: Nico Huber \u003cnico.h@gmx.de\u003e\n" }, { "commit": "9e698f9063289d4cd291311f037f0818242059f0", "tree": "c3c53bb69ed2355d9099a7e80c63ec41e97b2dc4", "parents": [ "00c2e8023a845b87716256d9e00503a416ef559b" ], "author": { "name": "Anastasia Klimchuk", "email": "aklm@chromium.org", "time": "Wed Apr 21 12:21:49 2021 +1000" }, "committer": { "name": "Nico Huber", "email": "nico.h@gmx.de", "time": "Sun Jan 22 00:55:18 2023 +0000" }, "message": "jlink_spi.c: Refactor singleton states into reentrant pattern\n\nMove global singleton states into a struct and store within\nthe spi_master data field for the life-time of the driver.\n\nThis is one of the steps on the way to move spi_master data\nmemory management behind the initialisation API, for more\ncontext see other patches under the same topic \"register_master_api\".\n\nChange-Id: If13ad0c979ccf62ca4ccbd479d471c657895ef59\nSigned-off-by: Anastasia Klimchuk \u003caklm@chromium.org\u003e\nOriginal-Reviewed-on: https://review.coreboot.org/c/flashrom/+/52560\nOriginal-Reviewed-by: Edward O\u0027Callaghan \u003cquasisec@chromium.org\u003e\nOriginal-Reviewed-by: Angel Pons \u003cth3fanbus@gmail.com\u003e\nOriginal-Reviewed-by: Miklós Márton \u003cmartonmiklosqdev@gmail.com\u003e\nReviewed-on: https://review.coreboot.org/c/flashrom-stable/+/72171\nTested-by: build bot (Jenkins) \u003cno-reply@coreboot.org\u003e\nReviewed-by: Nico Huber \u003cnico.h@gmx.de\u003e\n" }, { "commit": "00c2e8023a845b87716256d9e00503a416ef559b", "tree": "060fa28e3695327d74be59d73ff939ad06433822", "parents": [ "84f0392cce072ad52fa178869594fcf0bbf58647" ], "author": { "name": "Anastasia Klimchuk", "email": "aklm@chromium.org", "time": "Wed Apr 14 09:52:36 2021 +1000" }, "committer": { "name": "Nico Huber", "email": "nico.h@gmx.de", "time": "Sun Jan 22 00:55:18 2023 +0000" }, "message": "jlink_spi.c: Separate shutdown from failed init cleanup\n\nShutdown function was covering two different jobs here:\n1) the actual shutdown which is run at the end of the driver\u0027s\nlifecycle and 2) cleanup in cases when initialisation failed.\nNow, shutdown is only doing its main job (#1), and the driver\nitself is doing cleanup when init fails (#2).\n\nThe good thing is that now resources are released/closed immediately\nin cases when init fails (vs shutdown function which was run at some\npoint later), and the driver leaves clean space after itself\nif init fails.\n\nAnd very importantly this unlocks API change which plans to move\nregister_shutdown inside register master API, see this\nhttps://review.coreboot.org/c/flashrom/+/51761\n\nChange-Id: I71f64ed38154af670d4d28b8c7914d87fbc75679\nSigned-off-by: Anastasia Klimchuk \u003caklm@chromium.org\u003e\nOriginal-Reviewed-on: https://review.coreboot.org/c/flashrom/+/52308\nOriginal-Reviewed-by: Angel Pons \u003cth3fanbus@gmail.com\u003e\nReviewed-on: https://review.coreboot.org/c/flashrom-stable/+/72170\nTested-by: build bot (Jenkins) \u003cno-reply@coreboot.org\u003e\nReviewed-by: Nico Huber \u003cnico.h@gmx.de\u003e\n" }, { "commit": "137f02f887144eae222e44adb675cb299fd00337", "tree": "28638ab1b32d38f515a7b63a6c5dd3336093990b", "parents": [ "756b6b32e2a49c487d4bbc42d370e8826b41c922" ], "author": { "name": "Marc Schink", "email": "dev@zapb.de", "time": "Sun Aug 23 16:19:44 2020 +0200" }, "committer": { "name": "Nico Huber", "email": "nico.h@gmx.de", "time": "Thu Jan 05 16:35:01 2023 +0000" }, "message": "jlink_spi: Add option to enable target power\n\nflashrom-stable: Adapted error paths and shutdown function.\n\nChange-Id: I026c22ae1c22541d0024f164c827909ca4a34cf4\nSigned-off-by: Marc Schink \u003cdev@zapb.de\u003e\nOriginal-Reviewed-on: https://review.coreboot.org/c/flashrom/+/48380\nOriginal-Reviewed-by: Nico Huber \u003cnico.h@gmx.de\u003e\nReviewed-on: https://review.coreboot.org/c/flashrom-stable/+/71454\nReviewed-by: Nico Huber \u003cnico.h@gmx.de\u003e\nReviewed-by: Angel Pons \u003cth3fanbus@gmail.com\u003e\nTested-by: build bot (Jenkins) \u003cno-reply@coreboot.org\u003e\n" }, { "commit": "cc853d84ed2f8ecafc1f6daa443f8baa4c871805", "tree": "8e5f3e0b7a75d272a109e20af5aeeeec11dfebf7", "parents": [ "7e1345602641114c8eeb5cfef992bf1da8d7fa6a" ], "author": { "name": "Thomas Heijligen", "email": "thomas.heijligen@secunet.de", "time": "Tue May 04 15:32:17 2021 +0200" }, "committer": { "name": "Nico Huber", "email": "nico.h@gmx.de", "time": "Thu Jan 05 16:15:22 2023 +0000" }, "message": "programmer_table: move each entry to the associated programmer source\n\nChange-Id: I3d02bd789f0299e936eb86819b3b15b5ea2bb921\nSigned-off-by: Thomas Heijligen \u003cthomas.heijligen@secunet.de\u003e\nOriginal-Reviewed-on: https://review.coreboot.org/c/flashrom/+/52946\nOriginal-Reviewed-by: Anastasia Klimchuk \u003caklm@chromium.org\u003e\nOriginal-Reviewed-by: Nico Huber \u003cnico.h@gmx.de\u003e\nReviewed-on: https://review.coreboot.org/c/flashrom-stable/+/71373\nReviewed-by: Nico Huber \u003cnico.h@gmx.de\u003e\nReviewed-by: Angel Pons \u003cth3fanbus@gmail.com\u003e\nTested-by: build bot (Jenkins) \u003cno-reply@coreboot.org\u003e\n" }, { "commit": "7e1345602641114c8eeb5cfef992bf1da8d7fa6a", "tree": "ce19124575cfd893449c754800c757d096dd3130", "parents": [ "690a944066619ff9d450d71cdcfe2e0bcb1120f3" ], "author": { "name": "Angel Pons", "email": "th3fanbus@gmail.com", "time": "Mon Jun 07 13:29:13 2021 +0200" }, "committer": { "name": "Nico Huber", "email": "nico.h@gmx.de", "time": "Thu Jan 05 16:15:22 2023 +0000" }, "message": "treewide: Drop unnecessary uses of memset/memcpy\n\nSimply provide an initialiser or use a direct assignment instead.\n\nChange-Id: I07385375cd8eec8a95874001b402b2c17ec09e09\nSigned-off-by: Angel Pons \u003cth3fanbus@gmail.com\u003e\nOriginal-Reviewed-on: https://review.coreboot.org/c/flashrom/+/55267\nOriginal-Reviewed-by: Nico Huber \u003cnico.h@gmx.de\u003e\nReviewed-on: https://review.coreboot.org/c/flashrom-stable/+/71372\nReviewed-by: Nico Huber \u003cnico.h@gmx.de\u003e\nTested-by: build bot (Jenkins) \u003cno-reply@coreboot.org\u003e\n" }, { "commit": "281ed26f700e14ec823230c999b93caaaa07463d", "tree": "e2f84318a036875033ca7800f7119cc6af6f93d7", "parents": [ "e8106ba746046693fb8d3d2371ef2e07b221f085" ], "author": { "name": "Angel Pons", "email": "th3fanbus@gmail.com", "time": "Fri Apr 16 10:55:03 2021 +0200" }, "committer": { "name": "Nico Huber", "email": "nico.h@gmx.de", "time": "Thu Jan 05 16:07:04 2023 +0000" }, "message": "jlink_spi.c: Correct some log messages\n\nFix a few typos and a copy-paste error in log messages.\n\nChange-Id: Ic69503f60a59aa0f4b991eaa2a7be40a7d9c1301\nSigned-off-by: Angel Pons \u003cth3fanbus@gmail.com\u003e\nOriginal-Reviewed-on: https://review.coreboot.org/c/flashrom/+/52412\nOriginal-Reviewed-by: Miklós Márton \u003cmartonmiklosqdev@gmail.com\u003e\nOriginal-Reviewed-by: Edward O\u0027Callaghan \u003cquasisec@chromium.org\u003e\nReviewed-on: https://review.coreboot.org/c/flashrom-stable/+/71343\nReviewed-by: Nico Huber \u003cnico.h@gmx.de\u003e\nTested-by: build bot (Jenkins) \u003cno-reply@coreboot.org\u003e\n" }, { "commit": "5eca427ae64519b70d1c4ccfb427305ca9974ba0", "tree": "1ca22ef1e0072a76650fdd182206844f8ebddd7d", "parents": [ "1bbc501f79319cc6c8d839bc44fa55e96afab33a" ], "author": { "name": "Edward O\u0027Callaghan", "email": "quasisec@google.com", "time": "Sun Apr 12 17:27:53 2020 +1000" }, "committer": { "name": "Nico Huber", "email": "nico.h@gmx.de", "time": "Fri Dec 30 01:16:34 2022 +0100" }, "message": "const\u0027ify flashctx to align signatures with cros flashrom\n\nThe ChromiumOS flashrom fork has since const\u0027ify flashctx\nin a few places. This aligns the function signatures to\nmatch with downstream to ease forward porting patches\nout of downstream back into mainline flashrom.\n\nThis patch is minimum viable alignment and so feedback is\nwelcome.\n\nChange-Id: Iff6dbda13cb0d941481c0d204b9c30895630fbd1\nSigned-off-by: Edward O\u0027Callaghan \u003cquasisec@google.com\u003e\nOriginal-Reviewed-on: https://review.coreboot.org/c/flashrom/+/40324\nOriginal-Reviewed-by: Angel Pons \u003cth3fanbus@gmail.com\u003e\nReviewed-on: https://review.coreboot.org/c/flashrom-stable/+/70933\nReviewed-by: Nico Huber \u003cnico.h@gmx.de\u003e\nReviewed-by: Angel Pons \u003cth3fanbus@gmail.com\u003e\nTested-by: build bot (Jenkins) \u003cno-reply@coreboot.org\u003e\n" }, { "commit": "a8c0b68199c5f76073a8b9c2ecf2d3694086591e", "tree": "2e77e4b73a0b42227f08ad5879750498eb84aba4", "parents": [ "595c5d017402fb20bef14e4d2c399251470c95fe" ], "author": { "name": "Marc Schink", "email": "dev@zapb.de", "time": "Sat Aug 22 11:29:22 2020 +0200" }, "committer": { "name": "Felix Singer", "email": "felixsinger@posteo.net", "time": "Thu Sep 29 17:05:49 2022 +0000" }, "message": "jlink_spi: Reduce transfer size\n\nThe maximum transfer size is too large for some devices and\nresults in an USB timeout.\n\nChange-Id: If2c00b1524ec56740bdfe290096c3546cf375d73\nSigned-off-by: Marc Schink \u003cdev@zapb.de\u003e\nReviewed-on: https://review.coreboot.org/c/flashrom/+/48379\nTested-by: build bot (Jenkins) \u003cno-reply@coreboot.org\u003e\nReviewed-by: Miklós Márton \u003cmartonmiklosqdev@gmail.com\u003e\nReviewed-by: Angel Pons \u003cth3fanbus@gmail.com\u003e\nReviewed-on: https://review.coreboot.org/c/flashrom/+/67872\nReviewed-by: Felix Singer \u003cfelixsinger@posteo.net\u003e\n" }, { "commit": "deeac7e41a311a0806af0e65a2ce5c6673f9cf92", "tree": "2ff1082bf9ed049c2863deff9a6d66b6980b1812", "parents": [ "959aafa53eeae4f22766b9d098e5ca952af8c070" ], "author": { "name": "Nico Huber", "email": "nico.h@gmx.de", "time": "Sat Apr 22 00:09:42 2017 +0200" }, "committer": { "name": "Nico Huber", "email": "nico.h@gmx.de", "time": "Thu Jun 27 10:25:15 2019 +0000" }, "message": "spi: Drop spi_controller type\n\nNot needed anymore. Drop it fast before it encourages anyone to\nviolate layers again!\n\nChange-Id: I8eda93b429e3ebaef79e22aba76be62987e496f4\nSigned-off-by: Nico Huber \u003cnico.h@gmx.de\u003e\nReviewed-on: https://review.coreboot.org/c/flashrom/+/33651\nReviewed-by: Angel Pons \u003cth3fanbus@gmail.com\u003e\n" }, { "commit": "3578ec6a3d7187438c4093f4bb7ac2bb6d4184cb", "tree": "53c7ccc03fa21dcd4664e6fb1b48a9ec1661e023", "parents": [ "9cecc7e25dc3fe27a801a745410825cfc2cfaac3" ], "author": { "name": "Marc Schink", "email": "flashrom-dev@marcschink.de", "time": "Thu Mar 17 16:23:03 2016 +0100" }, "committer": { "name": "Nico Huber", "email": "nico.h@gmx.de", "time": "Sat Jan 05 16:25:04 2019 +0000" }, "message": "Add initial J-Link SPI programmer\n\nTested with SEGGER J-Link EDU, Flasher ARM and flash chip W25Q16.V.\n\nChange-Id: Ie03a054a75457ec9e1cab36ea124bb53b10e8d7e\nSigned-off-by: Marc Schink \u003cflashrom-dev@marcschink.de\u003e\nReviewed-on: https://review.coreboot.org/c/28087\nTested-by: build bot (Jenkins) \u003cno-reply@coreboot.org\u003e\nReviewed-by: Nico Huber \u003cnico.h@gmx.de\u003e\n" } ] }