)]}'
{
  "log": [
    {
      "commit": "044c9dc9290565ab7b9866bb26a8d077d9c3a5d7",
      "tree": "b0d6ab8fc2df6d8ff7a91a3d197e213a7ca2a320",
      "parents": [
        "fc7c13c882067b3ad7f2f5d3846d64164b8c8c87"
      ],
      "author": {
        "name": "Nico Huber",
        "email": "nico.h@gmx.de",
        "time": "Fri Dec 29 23:26:57 2023 +0100"
      },
      "committer": {
        "name": "Nico Huber",
        "email": "nico.h@gmx.de",
        "time": "Mon Jul 22 10:08:47 2024 +0000"
      },
      "message": "Add FT4222H support\n\nThe FT4222H features a very different engine compared to what we are\nused to from other FTDI USB/serial chips. It doesn\u0027t do UART (at least\nnot officially), doesn\u0027t have the MPSSE engine, but has a quad-SPI\nmaster, and SPI/I2C slave support.\n\nA few similarities exist, though, so this could probably make use of\nlibftdi in the future.\n\nThere are two config-mode straps that select one of four modes:\n0. 1 data interface + 1 GPIO interface\n1. 3 data interfaces + 1 GPIO interface\n2. 4 data interfaces\n3. 1 data interface\n\nWith multiple data interfaces, GPIO pins are muxed as additional CS\nlines. The advantage of mode 0 and 3 is that apparently a bigger buffer\nis available for the data interface. Only in these modes, it gets to\nits full speed (52.8MBps according to the datasheet[1]). The CS line is\nautomatically selected based on the USB interface used. No test using\nmultiple interfaces at once were performed, though.\n\nAll the USB commands and transfer protocols were derived from traces\ngathered with the proprietary LibFT4222. The results are summarized\nin the flashprog wiki[2].\n\n[1] https://www.ftdichip.com/old2020/Support/Documents/DataSheets/ICs/DS_FT4222H.pdf\n[2] https://flashprog.org/wiki/FT4222H\n\nChange-Id: I9ee1287e13113ccf8b5ea2be4a25866413a94844\nSigned-off-by: Nico Huber \u003cnico.h@gmx.de\u003e\nReviewed-on: https://review.sourcearcade.org/c/flashprog/+/50\nReviewed-by: Arthur Heymans \u003carthur@aheymans.xyz\u003e\n"
    },
    {
      "commit": "aa5268df1dde6a952465e345bcdf806c22d3154b",
      "tree": "45d2547b29ac97dc17f0bbe73ccfbd62a78aae54",
      "parents": [
        "71c97eebf266e1b682e4d1643b50cf4bc753b0be"
      ],
      "author": {
        "name": "Nico Huber",
        "email": "nico.huber@secunet.com",
        "time": "Thu Mar 09 17:15:23 2023 +0100"
      },
      "committer": {
        "name": "Nico Huber",
        "email": "nico.h@gmx.de",
        "time": "Thu Mar 16 21:48:53 2023 +0000"
      },
      "message": "Rename CONFIG_LINUX_GPIOD --\u003e CONFIG_LINUX_GPIO_SPI\n\nRename the config variable so it matches the programmer driver\u0027s name.\n\nChange-Id: I5cb44203dc9bb3db6de0c79e97435a376c059723\nSigned-off-by: Nico Huber \u003cnico.huber@secunet.com\u003e\nReviewed-on: https://review.coreboot.org/c/flashrom-stable/+/73588\nReviewed-by: Nico Huber \u003cnico.h@gmx.de\u003e\nTested-by: build bot (Jenkins) \u003cno-reply@coreboot.org\u003e\n"
    },
    {
      "commit": "50fb6f19bb8faad483078d3201977c65e2b57d5c",
      "tree": "e049c59cf3d888cd1fc72970c98eba275668d572",
      "parents": [
        "5d6cc5d64f65550ca6160a4730b79a295bb093de"
      ],
      "author": {
        "name": "Nico Huber",
        "email": "nico.h@gmx.de",
        "time": "Tue Feb 14 22:44:37 2023 +0100"
      },
      "committer": {
        "name": "Nico Huber",
        "email": "nico.h@gmx.de",
        "time": "Fri Mar 10 13:18:24 2023 +0000"
      },
      "message": "programmer_table: Clean up stale references\n\nThese programmers are not in flashrom-stable (yet). This slipped when\ncherry picking the table.\n\nChange-Id: I2db2785a598b4d96b051a6f2722f57ec429b32d8\nSigned-off-by: Nico Huber \u003cnico.h@gmx.de\u003e\nReviewed-on: https://review.coreboot.org/c/flashrom-stable/+/73482\nTested-by: build bot (Jenkins) \u003cno-reply@coreboot.org\u003e\n"
    },
    {
      "commit": "618994707d5ba556704ad9555191379cf46df6ae",
      "tree": "ad771fb01ca88cbf4ed3e93da0576f4a831a3929",
      "parents": [
        "28790a23f71d942f7ec9aa03c5ec90fb90503d0f"
      ],
      "author": {
        "name": "Steve Markgraf",
        "email": "steve@steve-m.de",
        "time": "Mon Jan 09 23:06:52 2023 +0100"
      },
      "committer": {
        "name": "Nico Huber",
        "email": "nico.h@gmx.de",
        "time": "Sat Mar 04 12:33:03 2023 +0000"
      },
      "message": "programmer: Add bitbanging programmer driver for Linux libgpiod\n\nWith this driver, any single board computer, old smartphone, etc. with\na few spare GPIOs can be used for flashrom.\n\nTested by reading of a 2048 kB flash chip on a Qualcomm MSM8916 SoC\n@800 MHz, ran the following command:\n\ntime flashrom -p linux_gpiod:gpiochip\u003d0,cs\u003d18,sck\u003d19,mosi\u003d13,miso\u003d56 -r test.bin\n\nThis command uses /dev/gpiochip0 with the specified GPIO numbers for the\nSPI lines. All arguments are mandatory.\n\nOutput:\n[...]\nFound GigaDevice flash chip \"GD25LQ16\" (2048 kB, SPI) on linux_gpiod.\n[...]\nreal    1m 33.96s\n\nChange-Id: Icad3eb7764f28feaea51bda3a7893da724c86d06\nSigned-off-by: Steve Markgraf \u003csteve@steve-m.de\u003e\nSigned-off-by: Nico Huber \u003cnico.h@gmx.de\u003e\nReviewed-on: https://review.coreboot.org/c/flashrom-stable/+/73290\nTested-by: build bot (Jenkins) \u003cno-reply@coreboot.org\u003e\n"
    },
    {
      "commit": "197b7c7b03bc2bbfa6a706812fa69897a3eb7cdb",
      "tree": "bf6b57efe06c818f4dbec5d54466930930fa52c0",
      "parents": [
        "dafd51e22b30b7e13e79567c065e55d30c788fa2"
      ],
      "author": {
        "name": "Nicholas Chin",
        "email": "nic.c3.14@gmail.com",
        "time": "Sun Oct 23 13:10:31 2022 -0600"
      },
      "committer": {
        "name": "Nico Huber",
        "email": "nico.h@gmx.de",
        "time": "Sat Feb 25 00:42:12 2023 +0000"
      },
      "message": "ch347_spi: Add initial support for the WCH CH347\n\nAdd support for the WCH CH347, a high-speed USB to bus converter\nsupporting multiple protocols interfaces including SPI. Currently only\nmode 1 (vendor defined communication interface) is supported, mode 2\n(USB HID communication interface) support will be added later. The code\nis currently hard coded to use CS1 and a SPI clock of 15 MHz, though\nthere are 2 CS lines and 6 other GPIO lines available, as well as a\nconfigurable clock divisor for up to 60MHz operation. Support for these\nwill be exposed through programmer parameters in later commits.\n\nThis currently uses the synchronous libusb API. Performance seems to be\nalright so far, if it becomes an issue I may switch to the asynchronous\nAPI.\n\nTested with a MX25L1606E flash chip\n\nSigned-off-by: Nicholas Chin \u003cnic.c3.14@gmail.com\u003e\nChange-Id: I31b86c41076cc45d4a416a73fa1131350fb745ba\nReviewed-on: https://review.coreboot.org/c/flashrom-stable/+/73106\nTested-by: build bot (Jenkins) \u003cno-reply@coreboot.org\u003e\nReviewed-by: Nico Huber \u003cnico.h@gmx.de\u003e\n"
    },
    {
      "commit": "f48ede4eb133f9cd44b3a2a4a98ea821611d74ae",
      "tree": "dd7af4ceb82dab5e707601bf5d776fbaaecdc789",
      "parents": [
        "ba9d9fedf4cb172ff0fa4a0a9ae461e6e0b874dd"
      ],
      "author": {
        "name": "Anastasia Klimchuk",
        "email": "aklm@chromium.org",
        "time": "Wed Jul 21 14:45:52 2021 +1000"
      },
      "committer": {
        "name": "Nico Huber",
        "email": "nico.h@gmx.de",
        "time": "Sun Jan 29 12:29:02 2023 +0000"
      },
      "message": "programmer_table: Remove space between address operator and variable\n\nChange-Id: Iba29b1bc3d77b8c17c51fc0552c129e6965fa308\nSigned-off-by: Anastasia Klimchuk \u003caklm@chromium.org\u003e\nOriginal-Reviewed-on: https://review.coreboot.org/c/flashrom/+/56469\nOriginal-Reviewed-by: Thomas Heijligen \u003csrc@posteo.de\u003e\nOriginal-Reviewed-by: Paul Menzel \u003cpaulepanter@mailbox.org\u003e\nOriginal-Reviewed-by: Angel Pons \u003cth3fanbus@gmail.com\u003e\nOriginal-Reviewed-by: Nico Huber \u003cnico.h@gmx.de\u003e\nOriginal-Reviewed-by: Edward O\u0027Callaghan \u003cquasisec@chromium.org\u003e\nReviewed-on: https://review.coreboot.org/c/flashrom-stable/+/72225\nReviewed-by: Nico Huber \u003cnico.h@gmx.de\u003e\nTested-by: build bot (Jenkins) \u003cno-reply@coreboot.org\u003e\n"
    },
    {
      "commit": "e28d8e4e2332054fb4b7f61e8ce03f316e3a63f3",
      "tree": "dcd1df2c485d8da20c2845e584bd157e0e4f63fb",
      "parents": [
        "6a2ebebfabff9ae72f8f03076b015a6b21bf8b90"
      ],
      "author": {
        "name": "Jean THOMAS",
        "email": "virgule@jeanthomas.me",
        "time": "Tue Oct 11 17:54:30 2022 +0200"
      },
      "committer": {
        "name": "Nico Huber",
        "email": "nico.h@gmx.de",
        "time": "Thu Jan 05 16:35:01 2023 +0000"
      },
      "message": "dirtyjtag: Add DirtyJTAG programmer\n\nAdd a new programmer driver for the DirtyJTAG project (a USB-JTAG\nfirmware for STM32 MCUs).\n\nSuccessfully tested with DirtyJTAG 1.4 running on an Olimex STM32-H103\ndevelopment board and a SST25VF020B SPI flash chip.\n\nChange-Id: Ic43e9a014ed7d04e429e73b30c9dcfdde1a78913\nSigned-off-by: Jean THOMAS \u003cvirgule@jeanthomas.me\u003e\nOriginal-Reviewed-on: https://review.coreboot.org/c/flashrom/+/67878\nOriginal-Reviewed-by: Felix Singer \u003cfelixsinger@posteo.net\u003e\nOriginal-Reviewed-by: Angel Pons \u003cth3fanbus@gmail.com\u003e\nOriginal-Reviewed-by: Nico Huber \u003cnico.h@gmx.de\u003e\nReviewed-on: https://review.coreboot.org/c/flashrom-stable/+/71492\nReviewed-by: Nico Huber \u003cnico.h@gmx.de\u003e\nReviewed-by: Angel Pons \u003cth3fanbus@gmail.com\u003e\nTested-by: build bot (Jenkins) \u003cno-reply@coreboot.org\u003e\n"
    },
    {
      "commit": "cc853d84ed2f8ecafc1f6daa443f8baa4c871805",
      "tree": "8e5f3e0b7a75d272a109e20af5aeeeec11dfebf7",
      "parents": [
        "7e1345602641114c8eeb5cfef992bf1da8d7fa6a"
      ],
      "author": {
        "name": "Thomas Heijligen",
        "email": "thomas.heijligen@secunet.de",
        "time": "Tue May 04 15:32:17 2021 +0200"
      },
      "committer": {
        "name": "Nico Huber",
        "email": "nico.h@gmx.de",
        "time": "Thu Jan 05 16:15:22 2023 +0000"
      },
      "message": "programmer_table: move each entry to the associated programmer source\n\nChange-Id: I3d02bd789f0299e936eb86819b3b15b5ea2bb921\nSigned-off-by: Thomas Heijligen \u003cthomas.heijligen@secunet.de\u003e\nOriginal-Reviewed-on: https://review.coreboot.org/c/flashrom/+/52946\nOriginal-Reviewed-by: Anastasia Klimchuk \u003caklm@chromium.org\u003e\nOriginal-Reviewed-by: Nico Huber \u003cnico.h@gmx.de\u003e\nReviewed-on: https://review.coreboot.org/c/flashrom-stable/+/71373\nReviewed-by: Nico Huber \u003cnico.h@gmx.de\u003e\nReviewed-by: Angel Pons \u003cth3fanbus@gmail.com\u003e\nTested-by: build bot (Jenkins) \u003cno-reply@coreboot.org\u003e\n"
    },
    {
      "commit": "633d6db1b5718305cf4daf87cf4a93d17bc3821e",
      "tree": "59ec962a28ab34ea99554db9b44ec804fead7e2d",
      "parents": [
        "bbfacffca88042d7f85d910b732bf88253573c76"
      ],
      "author": {
        "name": "Thomas Heijligen",
        "email": "thomas.heijligen@secunet.de",
        "time": "Wed Mar 31 19:09:44 2021 +0200"
      },
      "committer": {
        "name": "Nico Huber",
        "email": "nico.h@gmx.de",
        "time": "Thu Jan 05 16:15:22 2023 +0000"
      },
      "message": "programmer_table: convert entries to pointers\n\nAllows us to move the individual entries into their respective\ndriver files.\n\nChange-Id: Ifbb0ee4db5a85b1cd2afeafe4dca838579f79878\nSigned-off-by: Thomas Heijligen \u003cthomas.heijligen@secunet.de\u003e\nOriginal-Reviewed-on: https://review.coreboot.org/c/flashrom/+/52945\nOriginal-Reviewed-by: Nico Huber \u003cnico.h@gmx.de\u003e\nReviewed-on: https://review.coreboot.org/c/flashrom-stable/+/71369\nReviewed-by: Nico Huber \u003cnico.h@gmx.de\u003e\nReviewed-by: Angel Pons \u003cth3fanbus@gmail.com\u003e\nTested-by: build bot (Jenkins) \u003cno-reply@coreboot.org\u003e\n"
    },
    {
      "commit": "bbfacffca88042d7f85d910b732bf88253573c76",
      "tree": "afcd64ef5cffb9b33c7b9c4e1048574d9b1c1116",
      "parents": [
        "d0fcce2507d7a5ada93902cc7522ee06e91c4872"
      ],
      "author": {
        "name": "Thomas Heijligen",
        "email": "thomas.heijligen@secunet.de",
        "time": "Wed Mar 31 20:40:01 2021 +0200"
      },
      "committer": {
        "name": "Nico Huber",
        "email": "nico.h@gmx.de",
        "time": "Thu Jan 05 16:15:22 2023 +0000"
      },
      "message": "programmer_table: move array content to an own file\n\nChange-Id: I8e6d704e845ee4152c8676dd19dff0934fff007b\nSigned-off-by: Thomas Heijligen \u003cthomas.heijligen@secunet.de\u003e\nOriginal-Reviewed-on: https://review.coreboot.org/c/flashrom/+/52944\nOriginal-Reviewed-by: Nico Huber \u003cnico.h@gmx.de\u003e\nReviewed-on: https://review.coreboot.org/c/flashrom-stable/+/71368\nReviewed-by: Nico Huber \u003cnico.h@gmx.de\u003e\nReviewed-by: Angel Pons \u003cth3fanbus@gmail.com\u003e\nTested-by: build bot (Jenkins) \u003cno-reply@coreboot.org\u003e\n"
    }
  ]
}