flashchips: Add Winbond W25Q16JV_M (DTR version)

Fully featured 3.3V version of Winbond's 16Mbit chip.

Datasheet used:
https://www.winbond.com/resource-files/w25q16jv_dtr%20reve%2002092018%20plus.pdf

Change-Id: I3150b4690c73c1118b6819b83b9dfab55ddf3c8f
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.sourcearcade.org/c/flashprog/+/286
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
diff --git a/flashchips.c b/flashchips.c
index b6ac9c7..b4641bd 100644
--- a/flashchips.c
+++ b/flashchips.c
@@ -18891,6 +18891,64 @@
 
 	{
 		.vendor		= "Winbond",
+		.name		= "W25Q16JV_M",
+		.bustype	= BUS_SPI,
+		.manufacture_id	= WINBOND_NEX_ID,
+		.model_id	= WINBOND_NEX_W25Q16JV_M,
+		.total_size	= 2048,
+		.page_size	= 256,
+		.feature_bits	= FEATURE_WRSR_EITHER | FEATURE_WRSR_EXT2 |
+				  FEATURE_WRSR2 | FEATURE_WRSR3 | FEATURE_OTP |
+				  FEATURE_QPI_SRP,
+		.dummy_cycles	= { .qpi_read_params = { 2, 4, 6, 8 } },
+		.tested		= TEST_UNTESTED,
+		.probe		= probe_spi_rdid,
+		.probe_timing	= TIMING_ZERO,
+		.block_erasers	=
+		{
+			{
+				.eraseblocks = { {4 * 1024, 512} },
+				.block_erase = spi_block_erase_20,
+			}, {
+				.eraseblocks = { {32 * 1024, 64} },
+				.block_erase = spi_block_erase_52,
+			}, {
+				.eraseblocks = { {64 * 1024, 32} },
+				.block_erase = spi_block_erase_d8,
+			}, {
+				.eraseblocks = { {2048 * 1024, 1} },
+				.block_erase = spi_block_erase_60,
+			}, {
+				.eraseblocks = { {2048 * 1024, 1} },
+				.block_erase = spi_block_erase_c7,
+			},
+		},
+		.reg_bits	=
+		{
+			.qe	= {STATUS2, 1, RW},
+			.srp	= {STATUS1, 7, RW},
+			.srl	= {STATUS2, 0, RW},
+			.bp	= {{STATUS1, 2, RW}, {STATUS1, 3, RW}, {STATUS1, 4, RW}},
+			.tb	= {STATUS1, 5, RW},
+			.sec	= {STATUS1, 6, RW},
+			.cmp	= {STATUS2, 6, RW},
+			.wps	= {STATUS3, 2, RW},
+		},
+		.wp_write_cfg	= spi_wp_write_cfg,
+		.wp_read_cfg	= spi_wp_read_cfg,
+		.wp_get_ranges	= spi_wp_get_available_ranges,
+		.decode_range	= decode_range_spi25,
+		.printlock	= spi_prettyprint_status_register_bp4_srwd,
+		.unlock		= spi_disable_blockprotect_bp4_srwd,
+		.write		= spi_chip_write_256,
+		.read		= spi_chip_read,
+		.voltage	= {2700, 3600},
+		.prepare_access	= spi_prepare_io,
+		.finish_access	= spi_finish_io,
+	},
+
+	{
+		.vendor		= "Winbond",
 		.name		= "W25Q16.W",
 		.bustype	= BUS_SPI,
 		.manufacture_id	= WINBOND_NEX_ID,