Add support for AT45DB321C
It seems like this model is one-of-a-kind... it shares some properties
with the older versions of the AT45DB series as well as with new ones.
Corresponding to flashrom svn r1724.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
diff --git a/at45db.c b/at45db.c
index 82196d0..ba2735d 100644
--- a/at45db.c
+++ b/at45db.c
@@ -34,6 +34,7 @@
/* Opcodes */
#define AT45DB_STATUS 0xD7 /* NB: this is a block erase command on most other chips(!). */
#define AT45DB_DISABLE_PROTECT 0x3D, 0x2A, 0x7F, 0x9A
+#define AT45DB_READ_ARRAY 0xE8
#define AT45DB_READ_PROTECT 0x32
#define AT45DB_READ_LOCKDOWN 0x35
#define AT45DB_PAGE_ERASE 0x81
@@ -141,6 +142,8 @@
return 1;
}
+ /* AT45DB321C does not support lockdown or a page size of a power of 2... */
+ const bool isAT45DB321C = (strcmp(flash->chip->name, "AT45DB321C") == 0);
msg_cdbg("Chip status register is 0x%02x\n", status);
msg_cdbg("Chip status register: Bit 7 / Ready is %sset\n", (status & AT45DB_READY) ? "" : "not ");
msg_cdbg("Chip status register: Bit 6 / Compare match is %sset\n", (status & AT45DB_CMP) ? "" : "not ");
@@ -151,12 +154,18 @@
const uint8_t dens = (status >> 3) & 0x7; /* Bit 2 is always 1, we use the other bits only */
msg_cdbg("Chip status register: Density is %u Mb\n", 1 << (dens - 1));
msg_cdbg("Chip status register: Bit 1 / Protection is %sset\n", (status & AT45DB_PROT) ? "" : "not ");
- msg_cdbg("Chip status register: Bit 0 / \"Power of 2\" is %sset\n",
- (status & AT45DB_POWEROF2) ? "" : "not ");
+
+ if (isAT45DB321C)
+ spi_prettyprint_status_register_bit(status, 0);
+ else
+ msg_cdbg("Chip status register: Bit 0 / \"Power of 2\" is %sset\n",
+ (status & AT45DB_POWEROF2) ? "" : "not ");
+
if (status & AT45DB_PROT)
at45db_prettyprint_protection_register(flash, AT45DB_READ_PROTECT, "protect");
- at45db_prettyprint_protection_register(flash, AT45DB_READ_LOCKDOWN, "lock");
+ if (!isAT45DB321C)
+ at45db_prettyprint_protection_register(flash, AT45DB_READ_LOCKDOWN, "lock");
return 0;
}
@@ -258,6 +267,45 @@
return 0;
}
+/* Legacy continuous read, used where spi_read_at45db() is not available.
+ * The first 4 (dummy) bytes read need to be discarded. */
+int spi_read_at45db_e8(struct flashctx *flash, uint8_t *buf, unsigned int addr, unsigned int len)
+{
+ const unsigned int page_size = flash->chip->page_size;
+ const unsigned int total_size = flash->chip->total_size * 1024;
+ if ((addr + len) > total_size) {
+ msg_cerr("%s: tried to read beyond flash boundary: addr=%u, len=%u, size=%u\n",
+ __func__, addr, len, total_size);
+ return 1;
+ }
+
+ /* We have to split this up into chunks to fit within the programmer's read size limit, but those
+ * chunks can cross page boundaries. */
+ const unsigned int max_data_read = flash->pgm->spi.max_data_read;
+ const unsigned int max_chunk = (max_data_read > 0) ? max_data_read : page_size;
+ while (addr < len) {
+ const unsigned int addr_at45 = at45db_convert_addr(addr, page_size);
+ const unsigned char cmd[] = {
+ AT45DB_READ_ARRAY,
+ (addr_at45 >> 16) & 0xff,
+ (addr_at45 >> 8) & 0xff,
+ (addr_at45 >> 0) & 0xff
+ };
+ /* We need to leave place for 4 dummy bytes and handle them explicitly. */
+ unsigned int chunk = min(max_chunk, len + 4);
+ uint8_t tmp[chunk];
+ int ret = spi_send_command(flash, sizeof(cmd), chunk, cmd, tmp);
+ if (ret) {
+ msg_cerr("%s: error sending read command!\n", __func__);
+ return ret;
+ }
+ /* Copy result without dummy bytes into buf and advance address counter respectively. */
+ memcpy(buf + addr, tmp + 4, chunk - 4);
+ addr += chunk - 4;
+ }
+ return 0;
+}
+
/* Returns 0 when ready, 1 on errors and timeouts. */
static int at45db_wait_ready (struct flashctx *flash, unsigned int us, unsigned int retries)
{