Add board enable for ASUS P4SC-E
I does this by setting bits 3..2 of register 0x24 on the ITE IT8707F,
while keeping bit 3 of register 0x23 set while manipulating the first
register.
AFAIK, there is no public datasheet available for this super i/o chip, but
the above is how the vendor BIOS does it. Also, registers 0x23 and 0x24 seem
to have the same meaning as on the ITE IT8710F.
Matching on NB/SB.
Tested on a P4SC-E with SST 39SF020A flash. Probe, read, erase, write
all work.
lspci/superio output:
http://www.flashrom.org/pipermail/flashrom/2010-July/004090.html
flashrom output:
http://www.flashrom.org/pipermail/flashrom/2010-August/004566.html
Many thanks to Reinder de Haan for help with reverse engineering this!
Corresponding to flashrom svn r1161.
Signed-off-by: Mattias Mattsson <vitplister@gmail.com>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
diff --git a/board_enable.c b/board_enable.c
index 5a35221..b1e2c65 100644
--- a/board_enable.c
+++ b/board_enable.c
@@ -498,6 +498,48 @@
return ret;
}
+/*
+ * The ITE IT8707F is a custom chip made by ITE exclusively for ASUS.
+ * It uses the Winbond command sequence to enter extended configuration
+ * mode and the ITE sequence to exit.
+ *
+ * Registers seems similar to the ones on ITE IT8710F.
+ */
+static int it8707f_write_enable(uint8_t port)
+{
+ uint8_t tmp;
+
+ w836xx_ext_enter(port);
+
+ /* Set bit 3 (GLB_REG_WE) of reg 0x23: Makes reg 0x24-0x2A rw */
+ tmp = sio_read(port, 0x23);
+ tmp |= (1 << 3);
+ sio_write(port, 0x23, tmp);
+
+ /* Set bit 2 (FLASH_WE) and bit 3 (FLASH_IF_EN) of reg 0x24 */
+ tmp = sio_read(port, 0x24);
+ tmp |= (1 << 2) | (1 << 3);
+ sio_write(port, 0x24, tmp);
+
+ /* Clear bit 3 (GLB_REG_WE) of reg 0x23: Makes reg 0x24-0x2A ro */
+ tmp = sio_read(port, 0x23);
+ tmp &= ~(1 << 3);
+ sio_write(port, 0x23, tmp);
+
+ exit_conf_mode_ite(port);
+
+ return 0;
+}
+
+/*
+ * Suited for:
+ * - ASUS P4SC-E: SiS 651 + 962 + ITE IT8707F
+ */
+static int it8707f_write_enable_2e(void)
+{
+ return it8707f_write_enable(0x2e);
+}
+
static int pc87360_gpio_set(uint8_t gpio, int raise)
{
static const int bankbase[] = {0, 4, 8, 10, 12};
@@ -1818,6 +1860,7 @@
{0x8086, 0x24D3, 0x1043, 0x80A6, 0x8086, 0x2578, 0x1043, 0x80F6, NULL, NULL, NULL, "ASUS", "P4C800-E Deluxe", 0, OK, intel_ich_gpio21_raise},
{0x8086, 0x2570, 0x1043, 0x80F2, 0x8086, 0x24D5, 0x1043, 0x80F3, NULL, NULL, NULL, "ASUS", "P4P800", 0, NT, intel_ich_gpio21_raise},
{0x8086, 0x2570, 0x1043, 0x80F2, 0x105A, 0x3373, 0x1043, 0x80F5, NULL, NULL, NULL, "ASUS", "P4P800-E Deluxe", 0, OK, intel_ich_gpio21_raise},
+ {0x1039, 0x0651, 0x1043, 0x8081, 0x1039, 0x0962, 0, 0, NULL, NULL, NULL, "ASUS", "P4SC-E", 0, OK, it8707f_write_enable_2e},
{0x8086, 0x2570, 0x1043, 0x80A5, 0x105A, 0x24D3, 0x1043, 0x80A6, NULL, NULL, NULL, "ASUS", "P4SD-LA", 0, NT, intel_ich_gpio32_raise},
{0x1039, 0x0661, 0x1043, 0x8113, 0x1039, 0x5513, 0x1043, 0x8087, NULL, NULL, NULL, "ASUS", "P4S800-MX", 512, OK, w836xx_memw_enable_2e},
{0x10B9, 0x1541, 0, 0, 0x10B9, 0x1533, 0, 0, "^P5A$", "asus", "p5a", "ASUS", "P5A", 0, OK, board_asus_p5a},