Changes to support the K8N-NEO3, first tested at Google on GSOC day :-)
Also minor changes to remove tab-space combinations where possible.
Corresponding to flashrom svn r144 and coreboot v2 svn r2850.
Signed-off-by: Ronald G. Minnich <rminnich@gmail.com>
Signed-off-by: David Hendricks <david.hendricks@gmail.com>
Acked-by: Stefan Reinauer <stepan@coresystems.de>
diff --git a/board_enable.c b/board_enable.c
index 0e72c2c..84c6e3a 100644
--- a/board_enable.c
+++ b/board_enable.c
@@ -153,7 +153,8 @@
return 1;
}
/* Start IO, 33MHz, readcnt input bytes, writecnt output bytes. Note:
- We can't use writecnt directly, but have to use a strange encoding */
+ * We can't use writecnt directly, but have to use a strange encoding
+ */
outb((0x5 << 4) | ((readcnt & 0x3) << 2) | (writeenc), port);
do {
busy = inb(port) & 0x80;
@@ -202,43 +203,39 @@
/*
* Helper functions for many Winbond Super I/Os of the W836xx range.
*/
-#define W836_INDEX 0x2E
-#define W836_DATA 0x2F
-
/* Enter extended functions */
-static void w836xx_ext_enter(void)
+static void w836xx_ext_enter(uint16_t port)
{
- outb(0x87, W836_INDEX);
- outb(0x87, W836_INDEX);
+ outb(0x87, port);
+ outb(0x87, port);
}
/* Leave extended functions */
-static void w836xx_ext_leave(void)
+static void w836xx_ext_leave(uint16_t port)
{
- outb(0xAA, W836_INDEX);
+ outb(0xAA, port);
}
/* General functions for reading/writing Winbond Super I/Os. */
-static unsigned char wbsio_read(unsigned char index)
+static unsigned char wbsio_read(uint16_t index, uint8_t reg)
{
- outb(index, W836_INDEX);
- return inb(W836_DATA);
+ outb(reg, index);
+ return inb(index+1);
}
-static void wbsio_write(unsigned char index, unsigned char data)
+static void wbsio_write(uint16_t index, uint8_t reg, uint8_t data)
{
- outb(index, W836_INDEX);
- outb(data, W836_DATA);
+ outb(reg, index);
+ outb(data, index+1);
}
-static void wbsio_mask(unsigned char index, unsigned char data,
- unsigned char mask)
+static void wbsio_mask(uint16_t index, uint8_t reg, uint8_t data, uint8_t mask)
{
- unsigned char tmp;
+ uint8_t tmp;
- outb(index, W836_INDEX);
- tmp = inb(W836_DATA) & ~mask;
- outb(tmp | (data & mask), W836_DATA);
+ outb(reg, index);
+ tmp = inb(index+1) & ~mask;
+ outb(tmp | (data & mask), index+1);
}
/**
@@ -248,36 +245,79 @@
* - Agami Aruma
* - IWILL DK8-HTX
*/
-static int w83627hf_gpio24_raise(const char *name)
+static int w83627hf_gpio24_raise(uint16_t index, const char *name)
{
- w836xx_ext_enter();
+ w836xx_ext_enter(index);
/* Is this the w83627hf? */
- if (wbsio_read(0x20) != 0x52) { /* SIO device ID register */
+ if (wbsio_read(index, 0x20) != 0x52) { /* Super I/O device ID register */
fprintf(stderr, "\nERROR: %s: W83627HF: Wrong ID: 0x%02X.\n",
- name, wbsio_read(0x20));
- w836xx_ext_leave();
+ name, wbsio_read(index, 0x20));
+ w836xx_ext_leave(index);
return -1;
}
/* PIN89S: WDTO/GP24 multiplex -> GPIO24 */
- wbsio_mask(0x2B, 0x10, 0x10);
+ wbsio_mask(index, 0x2B, 0x10, 0x10);
- wbsio_write(0x07, 0x08); /* Select logical device 8: GPIO port 2 */
+ wbsio_write(index, 0x07, 0x08); /* Select logical device 8: GPIO port 2 */
- wbsio_mask(0x30, 0x01, 0x01); /* Activate logical device. */
+ wbsio_mask(index, 0x30, 0x01, 0x01); /* Activate logical device. */
- wbsio_mask(0xF0, 0x00, 0x10); /* GPIO24 -> output */
+ wbsio_mask(index, 0xF0, 0x00, 0x10); /* GPIO24 -> output */
- wbsio_mask(0xF2, 0x00, 0x10); /* Clear GPIO24 inversion */
+ wbsio_mask(index, 0xF2, 0x00, 0x10); /* Clear GPIO24 inversion */
- wbsio_mask(0xF1, 0x10, 0x10); /* Raise GPIO24 */
+ wbsio_mask(index, 0xF1, 0x10, 0x10); /* Raise GPIO24 */
- w836xx_ext_leave();
+ w836xx_ext_leave(index);
return 0;
}
+static int w83627hf_gpio24_raise_2e(const char *name)
+{
+ return w83627hf_gpio24_raise(0x2d, name);
+}
+
+/**
+ * Winbond W83627THF: GPIO 4, bit 4
+ *
+ * Suited for:
+ * - MSI K8N-NEO3
+ */
+static int w83627thf_gpio4_4_raise(uint16_t index, const char *name)
+{
+ w836xx_ext_enter(index);
+ /* Is this the w83627thf? */
+ if (wbsio_read(index, 0x20) != 0x82) { /* Super I/O device ID register */
+ fprintf(stderr, "\nERROR: %s: W83627THF: Wrong ID: 0x%02X.\n",
+ name, wbsio_read(index, 0x20));
+ w836xx_ext_leave(index);
+ return -1;
+ }
+
+ /* PINxxxxS: GPIO4/bit 4 multiplex -> GPIOXXX */
+
+ wbsio_write(index, 0x07, 0x09); /* Select logical device 9: GPIO port 4 */
+
+ wbsio_mask(index, 0x30, 0x02, 0x02); /* Activate logical device. */
+
+ wbsio_mask(index, 0xF4, 0x00, 0x10); /* GPIO4 bit 4 -> output */
+
+ wbsio_mask(index, 0xF6, 0x00, 0x10); /* Clear GPIO4 bit 4 inversion */
+
+ wbsio_mask(index, 0xF5, 0x10, 0x10); /* Raise GPIO4 bit 4 */
+
+ w836xx_ext_leave(index);
+
+ return 0;
+}
+
+static int w83627thf_gpio4_4_raise_4e(const char *name)
+{
+ return w83627thf_gpio4_4_raise(0x4E, name);
+}
/**
* Suited for VIAs EPIA M and MII, and maybe other CLE266 based EPIAs.
*
@@ -335,12 +375,12 @@
pci_write_byte(dev, 0x59, val);
/* Raise ROM MEMW# line on Winbond w83697 SuperIO */
- w836xx_ext_enter();
+ w836xx_ext_enter(0x2E);
- if (!(wbsio_read(0x24) & 0x02)) /* flash rom enabled? */
- wbsio_mask(0x24, 0x08, 0x08); /* enable MEMW# */
+ if (!(wbsio_read(0x2E, 0x24) & 0x02)) /* flash rom enabled? */
+ wbsio_mask(0x2E, 0x24, 0x08, 0x08); /* enable MEMW# */
- w836xx_ext_leave();
+ w836xx_ext_leave(0x2E);
return 0;
}
@@ -487,9 +527,11 @@
{0x10de, 0x0360, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
"gigabyte", "m57sli", "GIGABYTE GA-M57SLI", it87xx_probe_serial_flash},
{0x1022, 0x7468, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
- "iwill", "dk8_htx", "IWILL DK8-HTX", w83627hf_gpio24_raise},
+ "iwill", "dk8_htx", "IWILL DK8-HTX", w83627hf_gpio24_raise_2e},
+ {0x10de, 0x005e, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
+ "msi", "k8n-neo3", "MSI K8N Neo3", w83627thf_gpio4_4_raise_4e},
{0x1022, 0x746B, 0x1022, 0x36C0, 0x0000, 0x0000, 0x0000, 0x0000,
- "AGAMI", "ARUMA", "agami Aruma", w83627hf_gpio24_raise},
+ "AGAMI", "ARUMA", "agami Aruma", w83627hf_gpio24_raise_2e},
{0x1106, 0x3177, 0x1106, 0xAA01, 0x1106, 0x3123, 0x1106, 0xAA01,
NULL, NULL, "VIA EPIA M/MII/...", board_via_epia_m},
{0x1106, 0x3177, 0x1043, 0x80A1, 0x1106, 0x3205, 0x1043, 0x8118,
@@ -509,8 +551,8 @@
* Match boards on LinuxBIOS table gathered vendor and part name.
* Require main PCI IDs to match too as extra safety.
*/
-static struct board_pciid_enable *board_match_linuxbios_name(char *vendor,
- char *part)
+static struct board_pciid_enable *board_match_linuxbios_name(char *vendor,
+ char *part)
{
struct board_pciid_enable *board = board_pciid_enables;
@@ -525,10 +567,11 @@
continue;
if (board->second_vendor &&
- !pci_dev_find(board->second_vendor, board->second_device))
+ !pci_dev_find(board->second_vendor, board->second_device))
continue;
return board;
}
+ printf("NOT FOUND %s:%s\n", vendor, part);
return NULL;
}
@@ -545,20 +588,20 @@
continue;
if (!pci_card_find(board->first_vendor, board->first_device,
- board->first_card_vendor,
- board->first_card_device))
+ board->first_card_vendor,
+ board->first_card_device))
continue;
if (board->second_vendor) {
if (board->second_card_vendor) {
if (!pci_card_find(board->second_vendor,
- board->second_device,
- board->second_card_vendor,
- board->second_card_device))
+ board->second_device,
+ board->second_card_vendor,
+ board->second_card_device))
continue;
} else {
if (!pci_dev_find(board->second_vendor,
- board->second_device))
+ board->second_device))
continue;
}
}
@@ -582,7 +625,7 @@
if (board) {
printf("Found board \"%s\": Enabling flash write... ",
- board->name);
+ board->name);
ret = board->enable(board->name);
if (ret)