flashchips: Add Sanyo LE25FU206/A and LE25FU106B

As per user `The_Raven Raven` on the mailing list. Since the added
values had some inconsistencies, the chips are marked as untested.

Change-Id: I6c26aafdca232110986334e85297d73d513600dc
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/28813
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
diff --git a/flashchips.c b/flashchips.c
index d2a8d77..d85ea74 100644
--- a/flashchips.c
+++ b/flashchips.c
@@ -11881,6 +11881,106 @@
 
 	{
 		.vendor		= "Sanyo",
+		.name		= "LE25FU106B",
+		.bustype	= BUS_SPI,
+		.manufacture_id	= SANYO_ID,
+		.model_id	= SANYO_LE25FU106B,
+		.total_size	= 128,
+		.page_size	= 256,
+		.feature_bits	= FEATURE_WRSR_WREN,
+		.tested		= TEST_UNTESTED,
+		.probe		= probe_spi_res2,
+		.probe_timing	= TIMING_ZERO,
+		.block_erasers	= {
+			/* FIXME: Is this correct?
+			{
+				.eraseblocks = { {2 * 1024, 64} },
+				.block_erase = spi_block_erase_d7,
+			},*/
+			{
+				.eraseblocks = { {32 * 1024, 4} },
+				.block_erase = spi_block_erase_d8,
+			}, {
+				.eraseblocks = { {128 * 1024, 1} },
+				.block_erase = spi_block_erase_c7,
+			}
+		},
+		.printlock	= spi_prettyprint_status_register_bp1_srwd,
+		.unlock		= spi_disable_blockprotect_bp1_srwd,
+		.write		= spi_chip_write_256,
+		.read		= spi_chip_read,
+		.voltage	= {2300, 3600},
+	},
+
+	{
+		.vendor		= "Sanyo",
+		.name		= "LE25FU206",
+		.bustype	= BUS_SPI,
+		.manufacture_id	= SANYO_ID,
+		.model_id	= SANYO_LE25FU206,
+		.total_size	= 256,
+		.page_size	= 256,
+		.feature_bits	= FEATURE_WRSR_WREN,
+		.tested		= TEST_UNTESTED,
+		.probe		= probe_spi_res2,
+		.probe_timing	= TIMING_ZERO,
+		.block_erasers	= {
+			{
+				.eraseblocks = { {4 * 1024, 64} },
+				.block_erase = spi_block_erase_d7,
+			}, {
+				.eraseblocks = { {64 * 1024, 4} },
+				.block_erase = spi_block_erase_d8,
+			}, {
+				.eraseblocks = { {256 * 1024, 1} },
+				.block_erase = spi_block_erase_c7,
+			}
+		},
+		.printlock	= spi_prettyprint_status_register_bp1_srwd,
+		.unlock		= spi_disable_blockprotect_bp1_srwd,
+		.write		= spi_chip_write_256,
+		.read		= spi_chip_read,
+		.voltage	= {2300, 3600},
+	},
+
+	{
+		.vendor		= "Sanyo",
+		.name		= "LE25FU206A",
+		.bustype	= BUS_SPI,
+		.manufacture_id	= SANYO_ID,
+		.model_id	= SANYO_LE25FU206A,
+		.total_size	= 256,
+		.page_size	= 256,
+		.tested		= TEST_UNTESTED,
+		.probe		= probe_spi_rdid,
+		.probe_timing	= TIMING_ZERO,
+		.block_erasers	= {
+			{
+				.eraseblocks = { {4 * 1024, 64} },
+				.block_erase = spi_block_erase_20,
+			}, {
+				.eraseblocks = { {4 * 1024, 64} },
+				.block_erase = spi_block_erase_d7,
+			}, {
+				.eraseblocks = { {64 * 1024, 4} },
+				.block_erase = spi_block_erase_d8,
+			}, {
+				.eraseblocks = { {256 * 1024, 1} },
+				.block_erase = spi_block_erase_60,
+			}, {
+				.eraseblocks = { {256 * 1024, 1} },
+				.block_erase = spi_block_erase_c7,
+			}
+		},
+		.printlock	= spi_prettyprint_status_register_bp2_srwd,
+		.unlock		= spi_disable_blockprotect, /* #WP pin write-protects SRWP bit. */
+		.write		= spi_chip_write_256,
+		.read		= spi_chip_read,
+		.voltage	= {2300, 3600},
+	},
+
+	{
+		.vendor		= "Sanyo",
 		.name		= "LE25FU406B",
 		.bustype	= BUS_SPI,
 		.manufacture_id	= SANYO_ID,
diff --git a/flashchips.h b/flashchips.h
index 434c355..a1b38e0 100644
--- a/flashchips.h
+++ b/flashchips.h
@@ -612,6 +612,9 @@
 #define SANYO_LE25FW406		0x07	/* RES2 */
 #define SANYO_LE25FW418A	0x10	/* RES2 and some weird 1 byte RDID variant */
 #define SANYO_LE25FW406A	0x1A	/* RES2, no datasheet */
+#define SANYO_LE25FU106B	0x1D
+#define SANYO_LE25FU206		0x44
+#define SANYO_LE25FU206A	0x0612
 #define SANYO_LE25FU406B	0x1E	/* LE25FW418A without HD_READ mode option variant */
 #define SANYO_LE25FU406C	0x0613	/* Also known as LE25U40CMC apparently */
 #define SANYO_LE25FW806		0x26	/* RES2 and some weird 1 byte RDID variant */