Use a common parameter variable for all programmers
This allows us to reduce #ifdef clauses a lot if we compile out some
programmers completely.
Corresponding to flashrom svn r679.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Stefan Reinauer <stepan@coresystems.de>
diff --git a/dummyflasher.c b/dummyflasher.c
index 4cd9658..903f88b 100644
--- a/dummyflasher.c
+++ b/dummyflasher.c
@@ -24,45 +24,43 @@
#include <sys/types.h>
#include "flash.h"
-char *dummytype = NULL;
-
int dummy_init(void)
{
int i;
printf_debug("%s\n", __func__);
/* "all" is equivalent to specifying no type. */
- if (dummytype && (!strcmp(dummytype, "all"))) {
- free(dummytype);
- dummytype = NULL;
+ if (programmer_param && (!strcmp(programmer_param, "all"))) {
+ free(programmer_param);
+ programmer_param = NULL;
}
- if (!dummytype)
- dummytype = strdup("parallel,lpc,fwh,spi");
+ if (!programmer_param)
+ programmer_param = strdup("parallel,lpc,fwh,spi");
/* Convert the parameters to lowercase. */
- for (i = 0; dummytype[i] != '\0'; i++)
- dummytype[i] = (char)tolower(dummytype[i]);
+ for (i = 0; programmer_param[i] != '\0'; i++)
+ programmer_param[i] = (char)tolower(programmer_param[i]);
buses_supported = CHIP_BUSTYPE_NONE;
- if (strstr(dummytype, "parallel")) {
+ if (strstr(programmer_param, "parallel")) {
buses_supported |= CHIP_BUSTYPE_PARALLEL;
printf_debug("Enabling support for %s flash.\n", "parallel");
}
- if (strstr(dummytype, "lpc")) {
+ if (strstr(programmer_param, "lpc")) {
buses_supported |= CHIP_BUSTYPE_LPC;
printf_debug("Enabling support for %s flash.\n", "LPC");
}
- if (strstr(dummytype, "fwh")) {
+ if (strstr(programmer_param, "fwh")) {
buses_supported |= CHIP_BUSTYPE_FWH;
printf_debug("Enabling support for %s flash.\n", "FWH");
}
- if (strstr(dummytype, "spi")) {
+ if (strstr(programmer_param, "spi")) {
buses_supported |= CHIP_BUSTYPE_SPI;
spi_controller = SPI_CONTROLLER_DUMMY;
printf_debug("Enabling support for %s flash.\n", "SPI");
}
if (buses_supported == CHIP_BUSTYPE_NONE)
printf_debug("Support for all flash bus types disabled.\n");
- free(dummytype);
+ free(programmer_param);
return 0;
}
diff --git a/flash.h b/flash.h
index abe52c5..d9b3b7d 100644
--- a/flash.h
+++ b/flash.h
@@ -277,7 +277,7 @@
const char *device_name;
};
uint32_t pcidev_validate(struct pci_dev *dev, struct pcidev_status *devs);
-uint32_t pcidev_init(uint16_t vendor_id, struct pcidev_status *devs);
+uint32_t pcidev_init(uint16_t vendor_id, struct pcidev_status *devs, char *pcidev_bdf);
/* print.c */
char *flashbuses_to_text(enum chipbustype bustype);
@@ -350,7 +350,6 @@
#endif
/* dummyflasher.c */
-extern char *dummytype;
int dummy_init(void);
int dummy_shutdown(void);
void *dummy_map(const char *descr, unsigned long phys_addr, size_t len);
@@ -383,13 +382,13 @@
/* ft2232_spi.c */
#define FTDI_FT2232H 0x6010
#define FTDI_FT4232H 0x6011
-extern char *ft2232spi_param;
int ft2232_spi_init(void);
int ft2232_spi_send_command(unsigned int writecnt, unsigned int readcnt, const unsigned char *writearr, unsigned char *readarr);
int ft2232_spi_read(struct flashchip *flash, uint8_t *buf, int start, int len);
int ft2232_spi_write_256(struct flashchip *flash, uint8_t *buf);
/* flashrom.c */
+extern char *programmer_param;
extern int verbose;
extern const char *flashrom_version;
#define printf_debug(x...) { if (verbose) printf(x); }
@@ -399,7 +398,6 @@
int max(int a, int b);
int check_erased_range(struct flashchip *flash, int start, int len);
int verify_range(struct flashchip *flash, uint8_t *cmpbuf, int start, int len, char *message);
-extern char *pcidev_bdf;
char *strcat_realloc(char *dest, const char *src);
#define OK 0
@@ -507,7 +505,6 @@
int ich_spi_send_multicommand(struct spi_command *spicommands);
/* it87spi.c */
-extern char *it87opts;
extern uint16_t it8716f_flashport;
void enter_conf_mode_ite(uint16_t port);
void exit_conf_mode_ite(uint16_t port);
@@ -628,7 +625,6 @@
int write_stm50flw0x0x(struct flashchip *flash, uint8_t *buf);
/* serprog.c */
-extern char *serprog_param;
int serprog_init(void);
int serprog_shutdown(void);
void serprog_chip_writeb(uint8_t val, chipaddr addr);
diff --git a/flashrom.c b/flashrom.c
index a1d0cc2..a51fd63 100644
--- a/flashrom.c
+++ b/flashrom.c
@@ -34,6 +34,7 @@
char *chip_to_probe = NULL;
int verbose = 0;
enum programmer programmer = PROGRAMMER_INTERNAL;
+char *programmer_param = NULL;
const struct programmer_entry programmer_table[] = {
{
@@ -642,30 +643,32 @@
case 'p':
if (strncmp(optarg, "internal", 8) == 0) {
programmer = PROGRAMMER_INTERNAL;
+ if (optarg[8] == '=')
+ programmer_param = strdup(optarg + 9);
} else if (strncmp(optarg, "dummy", 5) == 0) {
programmer = PROGRAMMER_DUMMY;
if (optarg[5] == '=')
- dummytype = strdup(optarg + 6);
+ programmer_param = strdup(optarg + 6);
} else if (strncmp(optarg, "nic3com", 7) == 0) {
programmer = PROGRAMMER_NIC3COM;
if (optarg[7] == '=')
- pcidev_bdf = strdup(optarg + 8);
+ programmer_param = strdup(optarg + 8);
} else if (strncmp(optarg, "satasii", 7) == 0) {
programmer = PROGRAMMER_SATASII;
if (optarg[7] == '=')
- pcidev_bdf = strdup(optarg + 8);
+ programmer_param = strdup(optarg + 8);
} else if (strncmp(optarg, "it87spi", 7) == 0) {
programmer = PROGRAMMER_IT87SPI;
if (optarg[7] == '=')
- it87opts = strdup(optarg + 8);
+ programmer_param = strdup(optarg + 8);
} else if (strncmp(optarg, "ft2232spi", 9) == 0) {
programmer = PROGRAMMER_FT2232SPI;
if (optarg[9] == '=')
- ft2232spi_param = strdup(optarg + 10);
+ programmer_param = strdup(optarg + 10);
} else if (strncmp(optarg, "serprog", 7) == 0) {
programmer = PROGRAMMER_SERPROG;
if (optarg[7] == '=')
- serprog_param = strdup(optarg + 8);
+ programmer_param = strdup(optarg + 8);
} else {
printf("Error: Unknown programmer.\n");
exit(1);
diff --git a/ft2232_spi.c b/ft2232_spi.c
index 955bc56..db4db17 100644
--- a/ft2232_spi.c
+++ b/ft2232_spi.c
@@ -26,8 +26,6 @@
#include "flash.h"
#include "spi.h"
-char *ft2232spi_param = NULL;
-
#if FT2232_SPI_SUPPORT == 1
#include <ftdi.h>
@@ -83,16 +81,16 @@
return EXIT_FAILURE;
}
- if (ft2232spi_param && !strlen(ft2232spi_param)) {
- free(ft2232spi_param);
- ft2232spi_param = NULL;
+ if (programmer_param && !strlen(programmer_param)) {
+ free(programmer_param);
+ programmer_param = NULL;
}
- if (ft2232spi_param) {
- if (strstr(ft2232spi_param, "2232"))
+ if (programmer_param) {
+ if (strstr(programmer_param, "2232"))
ft2232_type = FTDI_FT2232H;
- if (strstr(ft2232spi_param, "4232"))
+ if (strstr(programmer_param, "4232"))
ft2232_type = FTDI_FT4232H;
- portpos = strstr(ft2232spi_param, "port=");
+ portpos = strstr(programmer_param, "port=");
if (portpos) {
portpos += 5;
switch (toupper(*portpos)) {
@@ -107,7 +105,7 @@
"using default.\n");
}
}
- free(ft2232spi_param);
+ free(programmer_param);
}
printf_debug("Using device type %s ",
(ft2232_type == FTDI_FT2232H) ? "2232H" : "4232H");
diff --git a/it87spi.c b/it87spi.c
index f3b9227..299725c 100644
--- a/it87spi.c
+++ b/it87spi.c
@@ -31,7 +31,6 @@
#define ITE_SUPERIO_PORT1 0x2e
#define ITE_SUPERIO_PORT2 0x4e
-char *it87opts = NULL;
uint16_t it8716f_flashport = 0;
/* use fast 33MHz SPI (<>0) or slow 16MHz (0) */
int fast_spi = 1;
@@ -95,11 +94,11 @@
flashport = sio_read(port, 0x64) << 8;
flashport |= sio_read(port, 0x65);
printf("Serial flash port 0x%04x\n", flashport);
- if (it87opts && !strlen(it87opts)) {
- free(it87opts);
- it87opts = NULL;
+ if (programmer_param && !strlen(programmer_param)) {
+ free(programmer_param);
+ programmer_param = NULL;
}
- if (it87opts && (portpos = strstr(it87opts, "port="))) {
+ if (programmer_param && (portpos = strstr(programmer_param, "port="))) {
portpos += 5;
flashport = strtol(portpos, (char **)NULL, 0);
printf("Forcing serial flash port 0x%04x\n", flashport);
diff --git a/nic3com.c b/nic3com.c
index bdf7db2..574e540 100644
--- a/nic3com.c
+++ b/nic3com.c
@@ -58,7 +58,7 @@
{
get_io_perms();
- io_base_addr = pcidev_init(PCI_VENDOR_ID_3COM, nics_3com);
+ io_base_addr = pcidev_init(PCI_VENDOR_ID_3COM, nics_3com, programmer_param);
id = pcidev_dev->device_id;
/* 3COM 3C90xB cards need a special fixup. */
@@ -94,7 +94,7 @@
OUTL(internal_conf, io_base_addr + INTERNAL_CONFIG);
}
- free(pcidev_bdf);
+ free(programmer_param);
pci_cleanup(pacc);
release_io_perms();
return 0;
diff --git a/pcidev.c b/pcidev.c
index 1de2bf5..580ebae 100644
--- a/pcidev.c
+++ b/pcidev.c
@@ -26,7 +26,6 @@
uint32_t io_base_addr;
struct pci_access *pacc;
struct pci_filter filter;
-char *pcidev_bdf = NULL;
struct pci_dev *pcidev_dev = NULL;
uint32_t pcidev_validate(struct pci_dev *dev, struct pcidev_status *devs)
@@ -58,7 +57,7 @@
return 0;
}
-uint32_t pcidev_init(uint16_t vendor_id, struct pcidev_status *devs)
+uint32_t pcidev_init(uint16_t vendor_id, struct pcidev_status *devs, char *pcidev_bdf)
{
struct pci_dev *dev;
char *msg = NULL;
diff --git a/satasii.c b/satasii.c
index b576749..2564436 100644
--- a/satasii.c
+++ b/satasii.c
@@ -47,7 +47,7 @@
get_io_perms();
- pcidev_init(PCI_VENDOR_ID_SII, satas_sii);
+ pcidev_init(PCI_VENDOR_ID_SII, satas_sii, programmer_param);
id = pcidev_dev->device_id;
if ((id == 0x3132) || (id == 0x3124)) {
@@ -71,7 +71,7 @@
int satasii_shutdown(void)
{
- free(pcidev_bdf);
+ free(programmer_param);
pci_cleanup(pacc);
release_io_perms();
return 0;
diff --git a/serprog.c b/serprog.c
index 04e15a8..d76cbe5 100644
--- a/serprog.c
+++ b/serprog.c
@@ -19,8 +19,14 @@
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
-#include <string.h>
+#include <stdio.h>
#include <stdlib.h>
+#include <unistd.h>
+#include "flash.h"
+
+#if SERPROG_SUPPORT == 1
+
+#include <string.h>
#include <ctype.h>
#include <fcntl.h>
#include <sys/types.h>
@@ -31,15 +37,8 @@
#include <netdb.h>
#include <sys/stat.h>
#include <errno.h>
-#include <stdio.h>
-#include <unistd.h>
#include <inttypes.h>
#include <termios.h>
-#include "flash.h"
-
-char *serprog_param = NULL;
-
-#if SERPROG_SUPPORT == 1
#define MSGHEADER "serprog:"
@@ -431,15 +430,15 @@
char *dev;
printf_debug("%s\n", __func__);
/* the parameter is either of format "/dev/device:baud" or "ip:port" */
- if ((!serprog_param) || (!strlen(serprog_param))) {
+ if ((!programmer_param) || (!strlen(programmer_param))) {
nodevice:
fprintf(stderr,
"Error: No device/host given for the serial programmer driver.\n"
"Use flashrom -p serprog=/dev/device:baud or flashrom -p serprog=ip:port\n");
exit(1);
}
- num = strstr(serprog_param, ":");
- len = num - serprog_param;
+ num = strstr(programmer_param, ":");
+ len = num - programmer_param;
if (!len) goto nodevice;
if (!num) {
fprintf(stderr,
@@ -447,15 +446,15 @@
"Use flashrom -p serprog=/dev/device:baud or flashrom -p serprog=ip:port\n");
exit(1);
}
- len = num - serprog_param;
+ len = num - programmer_param;
dev = malloc(len + 1);
if (!dev) sp_die("Error: memory allocation failure");
- memcpy(dev, serprog_param, len);
+ memcpy(dev, programmer_param, len);
dev[len] = 0;
num = strdup(num + 1);
if (!num) sp_die("Error: memory allocation failure");
- free(serprog_param);
- serprog_param = NULL;
+ free(programmer_param);
+ programmer_param = NULL;
if (dev[0] == '/') sp_fd = sp_openserport(dev, atoi(num));
else sp_fd = sp_opensocket(dev, atoi(num));