Add a bunch of new/tested stuff and various small changes 14
Tested Mainboards:
OK:
- ASUS M3A78-EH
http://www.flashrom.org/pipermail/flashrom/2010-October/005297.html
- ASUS P2B-LS
http://www.flashrom.org/pipermail/flashrom/2010-November/005506.html
- Biostar TA790GX A3+
http://paste.flashrom.org/view.php?id=1350
- ECS 848P-A7
http://www.flashrom.org/pipermail/flashrom/2011-January/005781.html
- GIGABYTE GA-G41MT-S2PT
Reported on IRC
- GIGABYTE GA-H77-D3H
Reported and tested by Alexander Gordeev on IRC.
- Gigabyte GA-X79-UD5
http://www.flashrom.org/pipermail/flashrom/2012-August/009811.html
- Shuttle FN78S
http://www.flashrom.org/pipermail/flashrom/2012-August/009714.html
- VIA EITX-3000
Reported on IRC by Tuju
NOT OK:
- Dell PowerEdge C6220 (0HYFFG)
http://www.flashrom.org/pipermail/flashrom/2012-September/009900.html
- Foxconn Q45M
http://www.flashrom.org/pipermail/flashrom/2012-September/009923.html
- MSI MS-7309 (K9N6SGM-V)
http://www.flashrom.org/pipermail/flashrom/2012-August/009712.html
- Supermicro X9QRi-F+
http://www.flashrom.org/pipermail/flashrom/2012-September/009887.html
- ZOTAC H61-ITX WiFi (H61ITX-A-E)
http://www.flashrom.org/pipermail/flashrom/2012-August/009649.html
ASUS CUSL2-C has been tested to be working with the board enable once
implemented for the TUSL2-C board. They seem to have the same PCI IDs
as shown in the links below. Since only the CUSL2-C board enable has been
tested yet, we distinguish the two by DMI strings.
http://paste.flashrom.org/view.php?id=1393
http://www.flashrom.org/pipermail/flashrom/attachments/20091206/ddca2c6c/attachment-0002.eml
Tested flash chips:
- Set EMST F25L008A to PREW (+PREW)
http://www.flashrom.org/pipermail/flashrom/2012-August/009714.html
- Set GigaDevice GD25Q64 to PREW (+PREW)
http://git.chromium.org/gitweb/?p=chromiumos/third_party/flashrom.git;a=commit;h=9e8ef49b1f626c2197e131fba6c5b65c8af4eeea
- Set Macronix MX25L12805 to P (+P)
http://www.flashrom.org/pipermail/flashrom/2012-September/009887.html
- Set SST SST49LF003A/B to PREW (+EW)
http://paste.flashrom.org/view.php?id=467
- Set Winbond W49V002FA to PREW (+EW)
http://www.flashrom.org/pipermail/flashrom/2011-January/005781.html
Tested chipsets:
- Intel X79 (0x1d41)
http://www.flashrom.org/pipermail/flashrom/2012-August/009811.html
Board enables:
- add ASUS P4P800-X
Created by Idwer Vollering and tested by Mingsen Bao:
http://paste.flashrom.org/view.php?id=467
- add DMI string to P4P800-VM
Miscellaneous:
- Add remaining Intel 7 series chipset (LPC) PCI IDs
- Add generic SPI detection for chips from Winbond
- Minor manpage changes
- Minor other cleanups
- Escape full stops after abbreviations in the manpage.
- Add ICH9 and successors to spi_get_valid_read_addr
Corresponding to flashrom svn r1601.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
diff --git a/flashchips.c b/flashchips.c
index c794afc..a6c2004 100644
--- a/flashchips.c
+++ b/flashchips.c
@@ -2596,7 +2596,7 @@
.total_size = 1024,
.page_size = 256,
.feature_bits = FEATURE_WRSR_EITHER,
- .tested = TEST_UNTESTED,
+ .tested = TEST_OK_PREW,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.block_erasers =
@@ -3474,7 +3474,7 @@
.unlock = spi_disable_blockprotect,
.write = spi_chip_write_256,
.read = spi_chip_read,
- .voltage = {2700, 3600},
+ .voltage = {2700, 3600},
},
{
@@ -3509,7 +3509,7 @@
.unlock = spi_disable_blockprotect,
.write = spi_chip_write_256,
.read = spi_chip_read,
- .voltage = {2700, 3600},
+ .voltage = {2700, 3600},
},
{
@@ -3585,7 +3585,7 @@
.unlock = spi_disable_blockprotect,
.write = spi_chip_write_256,
.read = spi_chip_read,
- .voltage = {2700, 3600},
+ .voltage = {2700, 3600},
},
{
@@ -3620,7 +3620,7 @@
.unlock = spi_disable_blockprotect,
.write = spi_chip_write_256,
.read = spi_chip_read,
- .voltage = {2700, 3600},
+ .voltage = {2700, 3600},
},
{
@@ -4014,7 +4014,7 @@
.unlock = spi_disable_blockprotect,
.write = spi_chip_write_256,
.read = spi_chip_read,
- .voltage = {2700, 3600},
+ .voltage = {2700, 3600},
},
{
@@ -4051,7 +4051,7 @@
.unlock = spi_disable_blockprotect,
.write = spi_chip_write_256,
.read = spi_chip_read,
- .voltage = {2700, 3600},
+ .voltage = {2700, 3600},
},
{
@@ -4178,7 +4178,7 @@
.page_size = 256,
/* OTP: 1024B total, 256B reserved; read 0x48; write 0x42 */
.feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP,
- .tested = TEST_UNTESTED,
+ .tested = TEST_OK_PREW,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.block_erasers =
@@ -5032,7 +5032,7 @@
.total_size = 16384,
.page_size = 256,
.feature_bits = FEATURE_WRSR_WREN,
- .tested = TEST_UNTESTED,
+ .tested = TEST_OK_PROBE,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.block_erasers =
@@ -7044,7 +7044,7 @@
.total_size = 384,
.page_size = 64 * 1024,
.feature_bits = FEATURE_REGISTERMAP | FEATURE_EITHER_RESET,
- .tested = TEST_OK_PR,
+ .tested = TEST_OK_PREW,
.probe = probe_jedec,
.probe_timing = 1, /* 150 ns */
.block_erasers =
@@ -8060,29 +8060,29 @@
.voltage = {2700, 3600},
},
- {
- .vendor = "ST",
- .name = "M29W512B",
+ {
+ .vendor = "ST",
+ .name = "M29W512B",
.bustype = BUS_PARALLEL,
- .manufacture_id = ST_ID,
- .model_id = ST_M29W512B,
- .total_size = 64,
- .page_size = 64 * 1024,
- .feature_bits = FEATURE_ADDR_2AA | FEATURE_EITHER_RESET,
+ .manufacture_id = ST_ID,
+ .model_id = ST_M29W512B,
+ .total_size = 64,
+ .page_size = 64 * 1024,
+ .feature_bits = FEATURE_ADDR_2AA | FEATURE_EITHER_RESET,
.tested = TEST_OK_PRE,
- .probe = probe_jedec,
- .probe_timing = TIMING_ZERO,
- .block_erasers =
- {
- {
- .eraseblocks = { {64 * 1024, 1} },
- .block_erase = erase_chip_block_jedec,
- }
- },
- .write = write_jedec_1,
- .read = read_memmapped,
+ .probe = probe_jedec,
+ .probe_timing = TIMING_ZERO,
+ .block_erasers =
+ {
+ {
+ .eraseblocks = { {64 * 1024, 1} },
+ .block_erase = erase_chip_block_jedec,
+ }
+ },
+ .write = write_jedec_1,
+ .read = read_memmapped,
.voltage = {2700, 3600},
- },
+ },
{
.vendor = "ST",
@@ -9476,7 +9476,7 @@
.total_size = 256,
.page_size = 128,
.feature_bits = FEATURE_EITHER_RESET,
- .tested = TEST_OK_PR,
+ .tested = TEST_OK_PREW,
.probe = probe_jedec,
.probe_timing = 10,
.block_erasers =
@@ -9722,6 +9722,21 @@
},
{
+ .vendor = "Winbond",
+ .name = "unknown Winbond (ex Nexcom) SPI chip",
+ .bustype = BUS_SPI,
+ .manufacture_id = WINBOND_NEX_ID,
+ .model_id = GENERIC_DEVICE_ID,
+ .total_size = 0,
+ .page_size = 256,
+ .tested = TEST_BAD_PREW,
+ .probe = probe_spi_rdid,
+ .probe_timing = TIMING_ZERO,
+ .write = NULL,
+ .read = NULL,
+ },
+
+ {
.vendor = "Generic",
.name = "unknown SPI chip (RDID)",
.bustype = BUS_SPI,