Proper error handling for ICH/VIA SPI
Use 16-bit values for bit masks in 16-bit registers.
Check for SPI Cycle In Progress and wait up to 60 ms.
Do not touch reserved bits.
Reduce SPI cycle timeout from 60 s to 60 ms.
Clear transaction errors caused by our own SPI accesses.
Add better debugging in case the hardware misbehaves.
Corresponding to flashrom svn r1281.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
diff --git a/ichspi.c b/ichspi.c
index 66c8d51..ed92893 100644
--- a/ichspi.c
+++ b/ichspi.c
@@ -51,6 +51,7 @@
#define SSFS_CDS 0x00000004
#define SSFS_FCERR 0x00000008
#define SSFS_AEL 0x00000010
+#define SSFS_RESERVED_MASK 0x000000e2
#define ICH9_REG_SSFC 0x91 /* 24 Bits */
#define SSFC_SCGO 0x00000200
@@ -63,6 +64,7 @@
#define SSFC_SCF 0x01000000
#define SSFC_SCF_20MHZ 0x00000000
#define SSFC_SCF_33MHZ 0x01000000
+#define SSFC_RESERVED_MASK 0xf8008100
#define ICH9_REG_PREOP 0x94 /* 16 Bits */
#define ICH9_REG_OPTYPE 0x96 /* 16 Bits */
@@ -76,9 +78,11 @@
// ICH7 registers
#define ICH7_REG_SPIS 0x00 /* 16 Bits */
-#define SPIS_SCIP 0x00000001
-#define SPIS_CDS 0x00000004
-#define SPIS_FCERR 0x00000008
+#define SPIS_SCIP 0x0001
+#define SPIS_GRANT 0x0002
+#define SPIS_CDS 0x0004
+#define SPIS_FCERR 0x0008
+#define SPIS_RESERVED_MASK 0x7ff0
/* VIA SPI is compatible with ICH7, but maxdata
to transfer is 16 bytes.
@@ -146,6 +150,11 @@
return mmio_readw(ich_spibar + X);
}
+static uint16_t REGREAD8(int X)
+{
+ return mmio_readb(ich_spibar + X);
+}
+
#define REGWRITE32(X,Y) mmio_writel(Y, ich_spibar+X)
#define REGWRITE16(X,Y) mmio_writew(Y, ich_spibar+X)
#define REGWRITE8(X,Y) mmio_writeb(Y, ich_spibar+X)
@@ -497,6 +506,15 @@
write_cmd = 1;
}
+ timeout = 100 * 60; /* 60 ms are 9.6 million cycles at 16 MHz. */
+ while ((REGREAD16(ICH7_REG_SPIS) & SPIS_SCIP) && --timeout) {
+ programmer_delay(10);
+ }
+ if (!timeout) {
+ msg_perr("Error: SCIP never cleared!\n");
+ return 1;
+ }
+
/* Programm Offset in Flash into FADDR */
REGWRITE32(ICH7_REG_SPIA, (offset & 0x00FFFFFF)); /* SPI addresses are 24 BIT only */
@@ -523,7 +541,9 @@
}
/* Assemble SPIS */
- temp16 = 0;
+ temp16 = REGREAD16(ICH7_REG_SPIS);
+ /* keep reserved bits */
+ temp16 &= SPIS_RESERVED_MASK;
/* clear error status registers */
temp16 |= (SPIS_CDS + SPIS_FCERR);
REGWRITE16(ICH7_REG_SPIS, temp16);
@@ -570,18 +590,26 @@
/* write it */
REGWRITE16(ICH7_REG_SPIC, temp16);
- /* wait for cycle complete */
- timeout = 100 * 1000 * 60; // 60s is a looong timeout.
- while (((REGREAD16(ICH7_REG_SPIS) & SPIS_CDS) == 0) && --timeout) {
+ /* Wait for Cycle Done Status or Flash Cycle Error. */
+ timeout = 100 * 60; /* 60 ms are 9.6 million cycles at 16 MHz. */
+ while (((REGREAD16(ICH7_REG_SPIS) & (SPIS_CDS | SPIS_FCERR)) == 0) &&
+ --timeout) {
programmer_delay(10);
}
if (!timeout) {
- msg_perr("timeout\n");
+ msg_perr("timeout, ICH7_REG_SPIS=0x%04x\n",
+ REGREAD16(ICH7_REG_SPIS));
+ return 1;
}
/* FIXME: make sure we do not needlessly cause transaction errors. */
- if ((REGREAD16(ICH7_REG_SPIS) & SPIS_FCERR) != 0) {
- msg_pdbg("Transaction error!\n");
+ temp16 = REGREAD16(ICH7_REG_SPIS);
+ if (temp16 & SPIS_FCERR) {
+ msg_perr("Transaction error for opcode 0x%02x!\n",
+ op.opcode);
+ /* keep reserved bits */
+ temp16 &= SPIS_RESERVED_MASK;
+ REGWRITE16(ICH7_REG_SPIS, temp16 | SPIS_FCERR);
return 1;
}
@@ -616,6 +644,15 @@
write_cmd = 1;
}
+ timeout = 100 * 60; /* 60 ms are 9.6 million cycles at 16 MHz. */
+ while ((REGREAD8(ICH9_REG_SSFS) & SSFS_SCIP) && --timeout) {
+ programmer_delay(10);
+ }
+ if (!timeout) {
+ msg_perr("Error: SCIP never cleared!\n");
+ return 1;
+ }
+
/* Programm Offset in Flash into FADDR */
REGWRITE32(ICH9_REG_FADDR, (offset & 0x00FFFFFF)); /* SPI addresses are 24 BIT only */
@@ -641,12 +678,13 @@
}
/* Assemble SSFS + SSFC */
- /* keep reserved bits (23-19,7,0) */
temp32 = REGREAD32(ICH9_REG_SSFS);
- temp32 &= 0xF8008100;
-
+ /* keep reserved bits */
+ temp32 &= SSFS_RESERVED_MASK | SSFC_RESERVED_MASK;
/* clear error status registers */
temp32 |= (SSFS_CDS + SSFS_FCERR);
+ REGWRITE32(ICH9_REG_SSFS, temp32);
+
/* Use 20 MHz */
temp32 |= SSFC_SCF_20MHZ;
@@ -691,18 +729,27 @@
/* write it */
REGWRITE32(ICH9_REG_SSFS, temp32);
- /*wait for cycle complete */
- timeout = 100 * 1000 * 60; // 60s is a looong timeout.
- while (((REGREAD32(ICH9_REG_SSFS) & SSFS_CDS) == 0) && --timeout) {
+ /* Wait for Cycle Done Status or Flash Cycle Error. */
+ timeout = 100 * 60; /* 60 ms are 9.6 million cycles at 16 MHz. */
+ while (((REGREAD32(ICH9_REG_SSFS) & (SSFS_CDS | SSFS_FCERR)) == 0) &&
+ --timeout) {
programmer_delay(10);
}
if (!timeout) {
- msg_perr("timeout\n");
+ msg_perr("timeout, ICH9_REG_SSFS=0x%08x\n",
+ REGREAD32(ICH9_REG_SSFS));
+ return 1;
}
/* FIXME make sure we do not needlessly cause transaction errors. */
- if ((REGREAD32(ICH9_REG_SSFS) & SSFS_FCERR) != 0) {
- msg_pdbg("Transaction error!\n");
+ temp32 = REGREAD32(ICH9_REG_SSFS);
+ if (temp32 & SSFS_FCERR) {
+ msg_perr("Transaction error for opcode 0x%02x!\n",
+ op.opcode);
+ /* keep reserved bits */
+ temp32 &= SSFS_RESERVED_MASK | SSFC_RESERVED_MASK;
+ /* Clear the transaction error. */
+ REGWRITE32(ICH9_REG_SSFS, temp32 | SSFS_FCERR);
return 1;
}
@@ -1042,7 +1089,6 @@
msg_pdbg("0x%02x: 0x%08x (PBR%d)\n", offs,
mmio_readl(ich_spibar + offs), i);
}
- msg_pdbg("\n");
if (mmio_readw(ich_spibar) & (1 << 15)) {
msg_pinfo("WARNING: SPI Configuration Lockdown activated.\n");
ichspi_lock = 1;
@@ -1082,8 +1128,20 @@
mmio_readl(ich_spibar + 0x80));
msg_pdbg("0x84: 0x%08x (PR4)\n",
mmio_readl(ich_spibar + 0x84));
- msg_pdbg("0x90: 0x%08x (SSFS, SSFC)\n",
- mmio_readl(ich_spibar + 0x90));
+
+ tmp = mmio_readl(ich_spibar + 0x90);
+ msg_pdbg("0x90: 0x%02x (SSFS)\n", tmp & 0xff);
+ msg_pdbg("AEL %i, ", (tmp >> 4) & 1);
+ msg_pdbg("FCERR %i, ", (tmp >> 3) & 1);
+ msg_pdbg("FDONE %i, ", (tmp >> 2) & 1);
+ msg_pdbg("SCIP %i\n", (tmp >> 0) & 1);
+ if (tmp & (1 << 3)) {
+ msg_pdbg("Clearing SSFS.FCERR\n");
+ mmio_writeb(1 << 3, ich_spibar + 0x90);
+ }
+ tmp >>= 8;
+ msg_pdbg("0x91: 0x%06x (SSFC)\n", tmp);
+
msg_pdbg("0x94: 0x%04x (PREOP)\n",
mmio_readw(ich_spibar + 0x94));
msg_pdbg("0x96: 0x%04x (OPTYPE)\n",