tree 0bd5bf090f36ef8f444d37e5bf4f2238345ac617
parent 17e23ac9798e5e983232c42314d7affb2994925e
author Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> 1279707961 +0000
committer Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> 1279707961 +0000

Add support for RayeR SPIPGM hardware as described in http://rayer.ic.cz/elektro/spipgm.htm

To use the RayeR driver, run
flashrom -p rayer_spi -V

Known bugs/limitations:
- Won't compile/work on non-x86 architectures.
- Will always use direct port I/O access.

Log follows:

flashrom v0.9.2-r1039 on MS-DOS 7 (i686), built with libpci 3.1.5, GCC 
4.3.2, little endian
Calibrating delay loop... OK.
Initializing rayer_bitbang_spi programmer
Using port 0x378 as I/O base for parallel port access.
...
Probing for Macronix MX25L1605, 2048 KB: probe_spi_rdid_generic: id1 
0xc2, id2 0x2015
...
Found chip "Macronix MX25L1605" (2048 KB, SPI) at physical address 
0xffe00000.
...
No operations were specified.

Corresponding to flashrom svn r1093.

Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Martin Rehak <rayer@seznam.cz>
Acked-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>