diff --git a/Makefile b/Makefile
index bbf20fa..9ee49c1 100644
--- a/Makefile
+++ b/Makefile
@@ -126,6 +126,7 @@
 	CONFIG_PICKIT2_SPI \
 	CONFIG_RAIDEN_DEBUG_SPI \
 	CONFIG_STLINKV3_SPI \
+	CONFIG_DIRTYJTAG_SPI \
 
 DEPENDS_ON_LIBFTDI := \
 	CONFIG_FT2232_SPI \
@@ -439,6 +440,9 @@
 # Digilent Development board JTAG
 CONFIG_DIGILENT_SPI ?= yes
 
+# DirtyJTAG
+CONFIG_DIRTYJTAG_SPI ?= yes
+
 # Disable J-Link for now.
 CONFIG_JLINK_SPI ?= no
 
@@ -686,6 +690,11 @@
 PROGRAMMER_OBJS += digilent_spi.o
 endif
 
+ifeq ($(CONFIG_DIRTYJTAG_SPI), yes)
+FEATURE_CFLAGS += -D'CONFIG_DIRTYJTAG_SPI=1'
+PROGRAMMER_OBJS += dirtyjtag_spi.o
+endif
+
 ifeq ($(CONFIG_JLINK_SPI), yes)
 FEATURE_CFLAGS += -D'CONFIG_JLINK_SPI=1'
 PROGRAMMER_OBJS += jlink_spi.o
diff --git a/dirtyjtag_spi.c b/dirtyjtag_spi.c
new file mode 100644
index 0000000..5b08952
--- /dev/null
+++ b/dirtyjtag_spi.c
@@ -0,0 +1,326 @@
+/*
+ * This file is part of the flashrom project.
+ *
+ * Copyright (C) 2021-2022 Jean THOMAS <virgule@jeanthomas.me>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+/*
+ * Driver for the DirtyJTAG project.
+ * See https://github.com/jeanthom/dirtyjtag for more info.
+ *
+ *  SPI-JTAG Pin Mapping
+ * |=========|==========|
+ * | SPI pin | JTAG pin |
+ * |=========|==========|
+ * | #CS     | TMS      |
+ * | #WP     | SRST     |
+ * | #HOLD   | TRST     |
+ * | MISO    | TDO      |
+ * | MOSI    | TDI      |
+ * | CLK     | TCK      |
+ * |=========|==========|
+ */
+
+#include <assert.h>
+#include <stdlib.h>
+#include <string.h>
+#include <errno.h>
+#include <libusb.h>
+#include "programmer.h"
+
+struct dirtyjtag_spi_data {
+	struct libusb_context *libusb_ctx;
+	struct libusb_device_handle *libusb_handle;
+};
+
+static const struct dev_entry devs_dirtyjtag_spi[] = {
+	{ 0x1209, 0xc0ca, OK, "DirtyJTAG", "JTAG probe" },
+	{ 0 },
+};
+
+static const char dirtyjtag_write_endpoint = 0x01;
+static const char dirtyjtag_read_endpoint = 0x82;
+static const int dirtyjtag_timeout = 100 * 10; /* 100 ms */
+
+enum dirtyjtag_command_identifier {
+	CMD_STOP = 0x00,
+	CMD_INFO = 0x01,
+	CMD_FREQ = 0x02,
+	CMD_XFER = 0x03,
+	CMD_SETSIG = 0x04,
+	CMD_GETSIG = 0x05,
+	CMD_CLK = 0x06
+};
+
+enum dirtyjtag_signal_identifier {
+	SIG_TCK = 1 << 1,
+	SIG_TDI = 1 << 2,
+	SIG_TDO = 1 << 3,
+	SIG_TMS = 1 << 4,
+	SIG_TRST = 1 << 5,
+	SIG_SRST = 1 << 6
+};
+
+static int dirtyjtag_send(struct dirtyjtag_spi_data *djtag_data, uint8_t *data, size_t len)
+{
+	int transferred;
+	int ret = libusb_bulk_transfer(djtag_data->libusb_handle,
+		dirtyjtag_write_endpoint,
+		data,
+		len,
+		&transferred,
+		dirtyjtag_timeout);
+	if (ret != 0) {
+		msg_perr("%s: failed to send query command\n", __func__);
+		return -1;
+	}
+	if (transferred != (int)len) {
+		msg_perr("%s: failed to send whole packet\n", __func__);
+		return -1;
+	}
+
+	return 0;
+}
+
+static int dirtyjtag_receive(struct dirtyjtag_spi_data *djtag_data, uint8_t *data, size_t buffer_len, int expected)
+{
+	int transferred;
+	int ret = libusb_bulk_transfer(djtag_data->libusb_handle,
+		dirtyjtag_read_endpoint,
+		data,
+		buffer_len,
+		&transferred,
+		dirtyjtag_timeout);
+	if (ret != 0) {
+		msg_perr("%s: Failed to read SPI commands\n", __func__);
+		return -1;
+	}
+
+	if (expected != -1 && transferred != expected) {
+		msg_perr("%s: failed to meet expected\n", __func__);
+		return -1;
+	}
+
+	return transferred;
+}
+
+static int dirtyjtag_spi_shutdown(void *data)
+{
+	struct dirtyjtag_spi_data *djtag_data = (struct dirtyjtag_spi_data*)data;
+	libusb_release_interface(djtag_data->libusb_handle, 0);
+	libusb_attach_kernel_driver(djtag_data->libusb_handle, 0);
+	libusb_close(djtag_data->libusb_handle);
+	libusb_exit(djtag_data->libusb_ctx);
+	free(data);
+	return 0;
+}
+
+static int dirtyjtag_djtag1_spi_send_command(struct dirtyjtag_spi_data *context,
+					     unsigned int writecnt, unsigned int readcnt,
+					     const unsigned char *writearr, unsigned char *readarr)
+{
+	const size_t max_xfer_size = 30; // max transfer size in DJTAG1
+	size_t len = writecnt + readcnt;
+	size_t num_xfer = (len + max_xfer_size - 1 ) / max_xfer_size; // ceil(len/max_xfer_size)
+	size_t i;
+
+	uint8_t *rxtx_buffer = malloc(max_xfer_size * num_xfer);
+	if (!rxtx_buffer) {
+		msg_perr("%s: Failed rxtx_buffer allocation\n", __func__);
+		return -1;
+	}
+
+	memcpy(rxtx_buffer, writearr, writecnt);
+	for (i = 0; i < num_xfer; i++) {
+		const size_t xfer_offset = i * max_xfer_size;
+		size_t txn_size = max_xfer_size;
+		if (i == num_xfer-1 && len % max_xfer_size != 0)
+			txn_size = len % max_xfer_size;
+
+		uint8_t transfer_buffer[32] = {
+			CMD_XFER,
+			txn_size * 8
+		};
+		memcpy(transfer_buffer + 2, rxtx_buffer + xfer_offset, txn_size);
+
+		if (dirtyjtag_send(context, transfer_buffer, sizeof(transfer_buffer)))
+			goto cleanup_fail;
+
+		if (dirtyjtag_receive(context, transfer_buffer, sizeof(transfer_buffer), 32) < 0)
+			goto cleanup_fail;
+
+		memcpy(rxtx_buffer + xfer_offset, transfer_buffer, txn_size);
+	}
+	memcpy(readarr, rxtx_buffer + writecnt, readcnt);
+
+	free(rxtx_buffer);
+
+	uint8_t tms_reset_buffer[] = {
+		CMD_SETSIG,
+		SIG_TMS,
+		SIG_TMS,
+
+		CMD_STOP,
+	};
+	dirtyjtag_send(context, tms_reset_buffer, sizeof(tms_reset_buffer));
+
+	return 0;
+
+cleanup_fail:
+	free(rxtx_buffer);
+	return -1;
+}
+
+static int dirtyjtag_spi_spi_send_command(const struct flashctx *flash,
+					  unsigned int writecnt, unsigned int readcnt,
+					  const unsigned char *writearr, unsigned char *readarr)
+{
+	struct dirtyjtag_spi_data *djtag_data = flash->mst->spi.data;
+	return dirtyjtag_djtag1_spi_send_command(djtag_data, writecnt, readcnt, writearr, readarr);
+}
+
+static struct spi_master spi_master_dirtyjtag_spi = {
+	.features	= SPI_MASTER_4BA,
+	.max_data_read	= MAX_DATA_READ_UNLIMITED,
+	.max_data_write	= MAX_DATA_WRITE_UNLIMITED,
+	.command	= dirtyjtag_spi_spi_send_command,
+	.multicommand	= default_spi_send_multicommand,
+	.read		= default_spi_read,
+	.write_256	= default_spi_write_256,
+	.write_aai	= default_spi_write_aai,
+};
+
+static int dirtyjtag_spi_init(void)
+{
+	struct libusb_device_handle *handle = NULL;
+	struct dirtyjtag_spi_data *djtag_data = NULL;
+
+	djtag_data = calloc(1, sizeof(struct dirtyjtag_spi_data));
+	if (djtag_data == NULL) {
+		msg_perr("%s: failed to allocate internal driver data structure\n", __func__);
+		return -1;
+	}
+
+	int ret = libusb_init(&djtag_data->libusb_ctx);
+	if (ret < 0) {
+		msg_perr("%s: couldn't initialize libusb!\n", __func__);
+		goto cleanup_djtag_struct;
+	}
+
+#if LIBUSB_API_VERSION < 0x01000106
+	libusb_set_debug(djtag_data->libusb_ctx, 3);
+#else
+	libusb_set_option(djtag_data->libusb_ctx, LIBUSB_OPTION_LOG_LEVEL, LIBUSB_LOG_LEVEL_INFO);
+#endif
+
+	uint16_t vid = devs_dirtyjtag_spi[0].vendor_id;
+	uint16_t pid = devs_dirtyjtag_spi[0].device_id;
+	handle = libusb_open_device_with_vid_pid(djtag_data->libusb_ctx, vid, pid);
+	if (handle == NULL) {
+		msg_perr("%s: couldn't open device %04x:%04x.\n", __func__, vid, pid);
+		goto cleanup_libusb_ctx;
+	}
+
+	ret = libusb_detach_kernel_driver(handle, 0);
+	if (ret != 0 && ret != LIBUSB_ERROR_NOT_FOUND) {
+		msg_pwarn("Cannot detach the existing USB driver. Claiming the interface may fail. %s\n",
+			libusb_error_name(ret));
+	}
+
+	ret = libusb_claim_interface(handle, 0);
+	if (ret != 0) {
+		msg_perr("%s: failed to claim interface 0: '%s'\n", __func__, libusb_error_name(ret));
+		goto cleanup_libusb_handle;
+	}
+
+	djtag_data->libusb_handle = handle;
+
+	unsigned long int freq = 100;
+	char *tmp = extract_programmer_param("spispeed");
+	if (tmp) {
+		char *units = tmp;
+
+		errno = 0;
+		freq = strtoul(tmp, &units, 0);
+		if (errno) {
+			msg_perr("Invalid frequency \"%s\", %s\n", tmp, strerror(errno));
+			free(tmp);
+			goto cleanup_libusb_handle;
+		}
+
+		if (!strcasecmp(units, "hz")) {
+			freq /= 1000;
+		} else if (!strcasecmp(units, "khz")) {
+			/* Do nothing, already in the right unit */
+		} else if (!strcasecmp(units, "mhz")) {
+			freq *= 1000;
+		} else {
+			msg_perr("Invalid unit: %s, use hz, khz or mhz\n", units);
+			free(tmp);
+			goto cleanup_libusb_handle;
+		}
+
+		if (freq > UINT16_MAX) {
+			msg_perr("%s: Frequency set above DJTAG1 limits (%d kHz)", __func__, UINT16_MAX);
+			free(tmp);
+			goto cleanup_libusb_handle;
+		}
+
+		msg_pinfo("%s: programmer speed set to %lu kHz\n", __func__, freq);
+	}
+	free(tmp);
+
+	uint8_t commands[] = {
+		CMD_SETSIG, /* Set TDI/TCK to low, SRST/TRST/TMS to high */
+		SIG_TDI | SIG_TMS | SIG_TCK | SIG_SRST | SIG_TRST,
+		SIG_SRST | SIG_TRST | SIG_TMS,
+
+		CMD_FREQ, /* Set frequency */
+		(freq >> 8) & 0xff,
+		freq & 0xff,
+
+		CMD_STOP,
+	};
+	ret = dirtyjtag_send(djtag_data, commands, sizeof(commands));
+	if (ret != 0) {
+		msg_perr("%s: failed to configure DirtyJTAG into initialized state\n", __func__);
+		goto cleanup_libusb_handle;
+	}
+
+	if (register_shutdown(dirtyjtag_spi_shutdown, djtag_data))
+		goto cleanup_libusb_handle;
+
+	spi_master_dirtyjtag_spi.data = djtag_data;
+	return register_spi_master(&spi_master_dirtyjtag_spi);
+
+cleanup_libusb_handle:
+	libusb_attach_kernel_driver(handle, 0);
+	libusb_close(handle);
+
+cleanup_libusb_ctx:
+	libusb_exit(djtag_data->libusb_ctx);
+
+cleanup_djtag_struct:
+	free(djtag_data);
+	return -1;
+}
+
+const struct programmer_entry programmer_dirtyjtag_spi = {
+	.name			= "dirtyjtag_spi",
+	.type			= USB,
+	.devs.dev		= devs_dirtyjtag_spi,
+	.init			= dirtyjtag_spi_init,
+	.map_flash_region	= fallback_map,
+	.unmap_flash_region	= fallback_unmap,
+	.delay			= internal_delay,
+};
diff --git a/flashrom.8.tmpl b/flashrom.8.tmpl
index 155645d..5a2f00c 100644
--- a/flashrom.8.tmpl
+++ b/flashrom.8.tmpl
@@ -357,6 +357,8 @@
 .sp
 .BR "* stlinkv3_spi" " (for SPI flash ROMs attached to STMicroelectronics STLINK V3 devices)"
 .sp
+.BR "* dirtyjtag_spi" " (for SPI flash ROMs attached to DirtyJTAG-compatible devices)"
+.sp
 Some programmers have optional or mandatory parameters which are described
 in detail in the
 .B PROGRAMMER-SPECIFIC INFORMATION
@@ -1289,6 +1291,22 @@
 .BR 62.5k ", " 125k ", " 250k ", " 500k ", " 1M ", " 2M " or " 4M
 (in Hz). The default is a frequency of 4 MHz.
 .sp
+.BR "dirtyjtag_spi " programmer
+.IP
+An optional
+.B freq
+parameter specifies the frequency of the SPI bus.
+Syntax is
+.sp
+.B "  flashrom \-p dirtyjtag_spi:spispeed=frequency"
+.sp
+where
+.B spispeed
+can be
+.BR any value in hertz, kilohertz or megahertz supported by the
+programmer. The default is a frequency of 100 KHz.
+.sp
+.SS
 .SS
 .BR "jlink_spi " programmer
 .IP
@@ -1442,7 +1460,7 @@
 have to be run as superuser/root, and need additional raw access permission.
 .sp
 .BR serprog ", " buspirate_spi ", " dediprog ", " usbblaster_spi ", " ft2232_spi ", " pickit2_spi ", " \
-ch341a_spi " and " digilent_spi
+ch341a_spi ", " digilent_spi " and " dirtyjtag_spi
 can be run as normal user on most operating systems if appropriate device
 permissions are set.
 .sp
diff --git a/meson.build b/meson.build
index 443cdcc..a96ffdf 100644
--- a/meson.build
+++ b/meson.build
@@ -38,6 +38,7 @@
 config_dediprog = get_option('config_dediprog')
 config_developerbox_spi = get_option('config_developerbox_spi')
 config_digilent_spi = get_option('config_digilent_spi')
+config_dirtyjtag_spi = get_option('config_dirtyjtag_spi')
 config_drkaiser = get_option('config_drkaiser')
 config_dummy = get_option('config_dummy')
 config_ft2232_spi = get_option('config_ft2232_spi')
@@ -91,6 +92,7 @@
   config_ch341a_spi = false
   config_dediprog = false
   config_digilent_spi = false
+  config_dirtyjtag_spi = false
   config_developerbox_spi = false
   config_pickit2_spi = false
 endif
@@ -154,6 +156,10 @@
   srcs += 'digilent_spi.c'
   cargs += '-DCONFIG_DIGILENT_SPI=1'
 endif
+if config_dirtyjtag_spi
+  srcs += 'dirtyjtag_spi.c'
+  cargs += '-DCONFIG_DIRTYJTAG_SPI=1'
+endif
 if config_drkaiser
   srcs += 'drkaiser.c'
   cargs += '-DCONFIG_DRKAISER=1'
diff --git a/meson_options.txt b/meson_options.txt
index 6fc8352..1421aeb 100644
--- a/meson_options.txt
+++ b/meson_options.txt
@@ -11,6 +11,7 @@
 option('config_dediprog', type : 'boolean', value : true, description : 'Dediprog SF100')
 option('config_developerbox_spi', type : 'boolean', value : true, description : 'Developerbox emergency recovery')
 option('config_digilent_spi', type : 'boolean', value : true, description : 'Digilent Development board JTAG')
+option('config_dirtyjtag_spi', type : 'boolean', value : true, description : 'DirtyJTAG')
 option('config_drkaiser', type : 'boolean', value : true, description : 'Dr. Kaiser')
 option('config_dummy', type : 'boolean', value : true, description : 'dummy tracing')
 option('config_ft2232_spi', type : 'boolean', value : true, description : 'FT2232 SPI dongles')
diff --git a/programmer.h b/programmer.h
index 2047b8e..9217c0d 100644
--- a/programmer.h
+++ b/programmer.h
@@ -92,6 +92,7 @@
 extern const struct programmer_entry programmer_serprog;
 extern const struct programmer_entry programmer_stlinkv3_spi;
 extern const struct programmer_entry programmer_usbblaster_spi;
+extern const struct programmer_entry programmer_dirtyjtag_spi;
 
 int programmer_init(const struct programmer_entry *prog, const char *param);
 int programmer_shutdown(void);
diff --git a/programmer_table.c b/programmer_table.c
index e7fd075..5528f2e 100644
--- a/programmer_table.c
+++ b/programmer_table.c
@@ -171,6 +171,10 @@
 #if CONFIG_STLINKV3_SPI == 1
     &programmer_stlinkv3_spi,
 #endif
+
+#if CONFIG_DIRTYJTAG_SPI == 1
+    &programmer_dirtyjtag_spi,
+#endif
 };
 
 const size_t programmer_table_size = ARRAY_SIZE(programmer_table);