Add support for the following AMIC SPI chips

http://www.amictechnology.com/pdf/A25L20P.pdf covers:
AMIC A25L05PT
AMIC A25L05PU
AMIC A25L10PT
AMIC A25L10PU
AMIC A25L20PT
AMIC A25L20PU
http://www.amictechnology.com/pdf/A25L16P.pdf covers:
AMIC A25L16PT
AMIC A25L16PU

Clarify the situation surrounding the A25L40PT and A25L40PU chips which
share the same RDID values, despite the fact that their erase block
layouts are different.  Rudolf Marek tested and confirmed the distinct
erase block layouts of these chips.

Add a pretty-printer for the AMIC SPI chip status register
Add a generic AMIC chip type.

Corresponding to flashrom svn r1096.

Signed-off-by: Daniel Lenski <dlenski@gmail.com>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
diff --git a/flashchips.c b/flashchips.c
index 3842170..902f956 100644
--- a/flashchips.c
+++ b/flashchips.c
@@ -1169,14 +1169,207 @@
 		.read		= read_memmapped,
 	},
 
-	/* The next two chip definitions have top/bottom boot blocks, but has no
-	device differentiation between the two */
+	{
+		.vendor		= "AMIC",
+		.name		= "A25L05PT",
+		.bustype	= CHIP_BUSTYPE_SPI,
+		.manufacture_id	= AMIC_ID,
+		.model_id	= AMIC_A25L05PT,
+		.total_size	= 64,
+		.page_size	= 256,
+		.tested		= TEST_UNTESTED,
+		.probe		= probe_spi_rdid4,
+		.probe_timing	= TIMING_ZERO,
+		.block_erasers	=
+		{
+			{
+				.eraseblocks = {
+					{32 * 1024, 1},
+					{16 * 1024, 1},
+					{8 * 1024, 1},
+					{4 * 1024, 2},
+				},
+				.block_erase = spi_block_erase_d8,
+			}, {
+				.eraseblocks = { {64 * 1024, 1} },
+				.block_erase = spi_block_erase_c7,
+			}
+		},
+		.unlock		= spi_disable_blockprotect,
+		.write		= spi_chip_write_256,
+		.read		= spi_chip_read,
+	},
+
+	{
+		.vendor		= "AMIC",
+		.name		= "A25L05PU",
+		.bustype	= CHIP_BUSTYPE_SPI,
+		.manufacture_id	= AMIC_ID,
+		.model_id	= AMIC_A25L05PU,
+		.total_size	= 64,
+		.page_size	= 256,
+		.tested		= TEST_UNTESTED,
+		.probe		= probe_spi_rdid4,
+		.probe_timing	= TIMING_ZERO,
+		.block_erasers	=
+		{
+			{
+				.eraseblocks = {
+					{4 * 1024, 2},
+					{8 * 1024, 1},
+					{16 * 1024, 1},
+					{32 * 1024, 1},
+				},
+				.block_erase = spi_block_erase_d8,
+			}, {
+				.eraseblocks = { {64 * 1024, 1} },
+				.block_erase = spi_block_erase_c7,
+			}
+		},
+		.unlock		= spi_disable_blockprotect,
+		.write		= spi_chip_write_256,
+		.read		= spi_chip_read,
+	},
+
+	{
+		.vendor		= "AMIC",
+		.name		= "A25L10PT",
+		.bustype	= CHIP_BUSTYPE_SPI,
+		.manufacture_id	= AMIC_ID,
+		.model_id	= AMIC_A25L10PT,
+		.total_size	= 128,
+		.page_size	= 256,
+		.tested		= TEST_UNTESTED,
+		.probe		= probe_spi_rdid4,
+		.probe_timing	= TIMING_ZERO,
+		.block_erasers	=
+		{
+			{
+				.eraseblocks = {
+					{64 * 1024, 1},
+					{32 * 1024, 1},
+					{16 * 1024, 1},
+					{8 * 1024, 1},
+					{4 * 1024, 2},
+				},
+				.block_erase = spi_block_erase_d8,
+			}, {
+				.eraseblocks = { {128 * 1024, 1} },
+				.block_erase = spi_block_erase_c7,
+			}
+		},
+		.unlock		= spi_disable_blockprotect,
+		.write		= spi_chip_write_256,
+		.read		= spi_chip_read,
+	},
+
+	{
+		.vendor		= "AMIC",
+		.name		= "A25L10PU",
+		.bustype	= CHIP_BUSTYPE_SPI,
+		.manufacture_id	= AMIC_ID,
+		.model_id	= AMIC_A25L10PU,
+		.total_size	= 128,
+		.page_size	= 256,
+		.tested		= TEST_UNTESTED,
+		.probe		= probe_spi_rdid4,
+		.probe_timing	= TIMING_ZERO,
+		.block_erasers	=
+		{
+			{
+				.eraseblocks = {
+					{4 * 1024, 2},
+					{8 * 1024, 1},
+					{16 * 1024, 1},
+					{32 * 1024, 1},
+					{64 * 1024, 1},
+				},
+				.block_erase = spi_block_erase_d8,
+			}, {
+				.eraseblocks = { {128 * 1024, 1} },
+				.block_erase = spi_block_erase_c7,
+			}
+		},
+		.unlock		= spi_disable_blockprotect,
+		.write		= spi_chip_write_256,
+		.read		= spi_chip_read,
+	},
+
+	{
+		.vendor		= "AMIC",
+		.name		= "A25L20PT",
+		.bustype	= CHIP_BUSTYPE_SPI,
+		.manufacture_id	= AMIC_ID,
+		.model_id	= AMIC_A25L20PT,
+		.total_size	= 256,
+		.page_size	= 256,
+		.tested		= TEST_UNTESTED,
+		.probe		= probe_spi_rdid4,
+		.probe_timing	= TIMING_ZERO,
+		.block_erasers	=
+		{
+			{
+				.eraseblocks = {
+					{64 * 1024, 3},
+					{32 * 1024, 1},
+					{16 * 1024, 1},
+					{8 * 1024, 1},
+					{4 * 1024, 2},
+				},
+				.block_erase = spi_block_erase_d8,
+			}, {
+				.eraseblocks = { {256 * 1024, 1} },
+				.block_erase = spi_block_erase_c7,
+			}
+		},
+		.unlock		= spi_disable_blockprotect,
+		.write		= spi_chip_write_256,
+		.read		= spi_chip_read,
+	},
+
+	{
+		.vendor		= "AMIC",
+		.name		= "A25L20PU",
+		.bustype	= CHIP_BUSTYPE_SPI,
+		.manufacture_id	= AMIC_ID,
+		.model_id	= AMIC_A25L20PU,
+		.total_size	= 256,
+		.page_size	= 256,
+		.tested		= TEST_UNTESTED,
+		.probe		= probe_spi_rdid4,
+		.probe_timing	= TIMING_ZERO,
+		.block_erasers	=
+		{
+			{
+				.eraseblocks = {
+					{4 * 1024, 2},
+					{8 * 1024, 1},
+					{16 * 1024, 1},
+					{32 * 1024, 1},
+					{64 * 1024, 3},
+				},
+				.block_erase = spi_block_erase_d8,
+			}, {
+				.eraseblocks = { {256 * 1024, 1} },
+				.block_erase = spi_block_erase_c7,
+			}
+		},
+		.unlock		= spi_disable_blockprotect,
+		.write		= spi_chip_write_256,
+		.read		= spi_chip_read,
+	},
+
+	/* The A25L40P{T,U} chips are distinguished by their
+	 * erase block layouts, but without any distinction in RDID.
+	 * This inexplicable quirk was verified by Rudolf Marek
+	 * and discussed on the flashrom mailing list on 2010-07-12.
+	 */
 	{
 		.vendor		= "AMIC",
 		.name		= "A25L40PT",
 		.bustype	= CHIP_BUSTYPE_SPI,
 		.manufacture_id	= AMIC_ID,
-		.model_id	= AMIC_A25L40P,
+		.model_id	= AMIC_A25L40PT,
 		.total_size	= 512,
 		.page_size	= 256,
 		.tested		= TEST_OK_PRW,
@@ -1208,7 +1401,7 @@
 		.name		= "A25L40PU",
 		.bustype	= CHIP_BUSTYPE_SPI,
 		.manufacture_id	= AMIC_ID,
-		.model_id	= AMIC_A25L40P,
+		.model_id	= AMIC_A25L40PU,
 		.total_size	= 512,
 		.page_size	= 256,
 		.tested		= TEST_OK_PRW,
@@ -1269,6 +1462,76 @@
 
 	{
 		.vendor		= "AMIC",
+		.name		= "A25L16PT",
+		.bustype	= CHIP_BUSTYPE_SPI,
+		.manufacture_id	= AMIC_ID,
+		.model_id	= AMIC_A25L16PT,
+		.total_size	= 2048,
+		.page_size	= 256,
+		.tested		= TEST_UNTESTED,
+		.probe		= probe_spi_rdid4,
+		.probe_timing	= TIMING_ZERO,
+		.block_erasers	=
+		{
+			{
+				.eraseblocks = {
+					{64 * 1024, 31},
+					{32 * 1024, 1},
+					{16 * 1024, 1},
+					{8 * 1024, 1},
+					{4 * 1024, 2},
+				},
+				.block_erase = spi_block_erase_d8,
+			}, {
+				.eraseblocks = { {2048 * 1024, 1} },
+				.block_erase = spi_block_erase_60,
+			}, {
+				.eraseblocks = { {2048 * 1024, 1} },
+				.block_erase = spi_block_erase_c7,
+			}
+		},
+		.unlock		= spi_disable_blockprotect,
+		.write		= spi_chip_write_256,
+		.read		= spi_chip_read,
+	},
+
+	{
+		.vendor		= "AMIC",
+		.name		= "A25L16PU",
+		.bustype	= CHIP_BUSTYPE_SPI,
+		.manufacture_id	= AMIC_ID,
+		.model_id	= AMIC_A25L16PU,
+		.total_size	= 2048,
+		.page_size	= 256,
+		.tested		= TEST_OK_PRW,
+		.probe		= probe_spi_rdid4,
+		.probe_timing	= TIMING_ZERO,
+		.block_erasers	=
+		{
+			{
+				.eraseblocks = {
+					{4 * 1024, 2},
+					{8 * 1024, 1},
+					{16 * 1024, 1},
+					{32 * 1024, 1},
+					{64 * 1024, 31},
+				},
+				.block_erase = spi_block_erase_d8,
+			}, {
+				.eraseblocks = { {2048 * 1024, 1} },
+				.block_erase = spi_block_erase_60,
+			}, {
+				.eraseblocks = { {2048 * 1024, 1} },
+				.block_erase = spi_block_erase_c7,
+			}
+		},
+		.unlock		= spi_disable_blockprotect,
+		.write		= spi_chip_write_256,
+		.read		= spi_chip_read,
+	},
+
+	{
+		.vendor		= "AMIC",
 		.name		= "A29002B",
 		.bustype	= CHIP_BUSTYPE_PARALLEL,
 		.manufacture_id	= AMIC_ID_NOPREFIX,
@@ -6678,6 +6941,21 @@
 	},
 
 	{
+		.vendor		= "AMIC",
+		.name		= "unknown AMIC SPI chip",
+		.bustype	= CHIP_BUSTYPE_SPI,
+		.manufacture_id	= AMIC_ID,
+		.model_id	= GENERIC_DEVICE_ID,
+		.total_size	= 0,
+		.page_size	= 256,
+		.tested		= TEST_BAD_PREW,
+		.probe		= probe_spi_rdid4,
+		.probe_timing	= TIMING_ZERO,
+		.write		= NULL,
+		.read		= NULL,
+	},
+
+	{
 		.vendor		= "Atmel",
 		.name		= "unknown Atmel SPI chip",
 		.bustype	= CHIP_BUSTYPE_SPI,
diff --git a/flashchips.h b/flashchips.h
index 63cba1e..3157b68 100644
--- a/flashchips.h
+++ b/flashchips.h
@@ -75,8 +75,19 @@
 
 #define AMIC_ID			0x7F37	/* AMIC */
 #define AMIC_ID_NOPREFIX	0x37	/* AMIC */
-#define AMIC_A25L40P		0x2013
-#define AMIC_A25L80P		0x2014
+#define AMIC_A25L05PT		0x2020
+#define AMIC_A25L05PU		0x2010
+#define AMIC_A25L10PT		0x2021
+#define AMIC_A25L10PU		0x2011
+#define AMIC_A25L20PT		0x2022
+#define AMIC_A25L20PU		0x2012
+#define AMIC_A25L40PT		0x2013	/* Datasheet says T and U have
+					   same device ID. Confirmed by
+					   hardware testing. */
+#define AMIC_A25L40PU		0x2013
+#define AMIC_A25L80P		0x2014	/* Seems that no A25L80PT exists */
+#define AMIC_A25L16PT		0x2025
+#define AMIC_A25L16PU		0x2015
 #define AMIC_A29002B		0x0d
 #define AMIC_A29002T		0x8C	/* Same as A290021T */
 #define AMIC_A29040B		0x86
diff --git a/spi25.c b/spi25.c
index 32bb73c..b8b26bd 100644
--- a/spi25.c
+++ b/spi25.c
@@ -328,6 +328,16 @@
 }
 
 /* Prettyprint the status register. Works for
+ * AMIC A25L series
+ */
+void spi_prettyprint_status_register_amic_a25l(uint8_t status)
+{
+	msg_cdbg("Chip status register: Status Register Write Disable "
+		     "(SRWD) is %sset\n", (status & (1 << 7)) ? "" : "not ");
+	spi_prettyprint_status_register_common(status);
+}
+
+/* Prettyprint the status register. Works for
  * ST M25P series
  * MX MX25L series
  */
@@ -389,6 +399,10 @@
 	status = spi_read_status_register();
 	msg_cdbg("Chip status register is %02x\n", status);
 	switch (flash->manufacture_id) {
+	case AMIC_ID:
+		if ((flash->model_id & 0xff00) == 0x2000)
+		    spi_prettyprint_status_register_amic_a25l(status);
+		break;
 	case ST_ID:
 		if (((flash->model_id & 0xff00) == 0x2000) ||
 		    ((flash->model_id & 0xff00) == 0x2500))