Board enable support for HP DL145 G3
This is a BCM5785 based machine, WP# and TLB# need to be deasserted using
GPIO 2 and 5 from the PM registers of the southbridge.
This is very similar to the x3455 implementation.
Corresponding to flashrom svn r423 and coreboot v2 svn r4031.
Signed-off-by: Mondrian Nuessle <nuessle@uni-hd.de>
Acked-by: Peter Stuge <peter@stuge.se>
diff --git a/board_enable.c b/board_enable.c
index fc30b78..00af1e8 100644
--- a/board_enable.c
+++ b/board_enable.c
@@ -329,6 +329,19 @@
return 0;
}
+static int board_hp_dl145_g3_enable(const char *name)
+{
+ uint8_t byte;
+
+ /* Set GPIO lines in the Broadcom HT-1000 southbridge. */
+ OUTB(0x44, 0xcd6); /* GPIO 0 reg from PM regs */
+ byte = INB(0xcd7);
+ /* Set GPIO 2 and 5 high, connected to flash WP# and TBL# pins. */
+ OUTB(byte | 0x24, 0xcd7);
+
+ return 0;
+}
+
/**
* Suited for EPoX EP-BX3, and maybe some other Intel 440BX based boards.
*/
@@ -1014,6 +1027,20 @@
.enable = ich6_gpio19_raise,
},
{
+ .first_vendor = 0x1166,
+ .first_device = 0x0223,
+ .first_card_vendor = 0x103c,
+ .first_card_device = 0x320d,
+ .second_vendor = 0x102b,
+ .second_device = 0x0522,
+ .second_card_vendor = 0x103c,
+ .second_card_device = 0x31fa,
+ .lb_vendor = "hp",
+ .lb_part = "dl145_g3",
+ .name = "HP DL145 G3",
+ .enable = board_hp_dl145_g3_enable,
+ },
+ {
.first_vendor = 0,
.first_device = 0,
.first_card_vendor = 0,