flashchips: Add SST26VF080A
Simple 8Mbit SPI flash, with one caveat though: SFDP reports 0xd8 as
both 32KiB and 64KiB eraser. The datasheet[1] lists this too in the
SFDP table, however otherwise consistently states that erase blocks
are uniform, and lists 0x52 as the 32KiB eraser. For now, we'll try
the latter.
[1] https://ww1.microchip.com/downloads/aemDocuments/documents/MPD/ProductDocuments/DataSheets/SST26VF080A-2.5V-3.0V-8-Mbit-Serial-Quad-IO-%28SQI%29-Flash-Memory-20006203C.pdf
Change-Id: I7d66ff23ef9ded7365e9c75a1aff0a68678a4ba0
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.sourcearcade.org/c/flashprog/+/263
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
diff --git a/flashchips.c b/flashchips.c
index f9f04a8..b498b80 100644
--- a/flashchips.c
+++ b/flashchips.c
@@ -15077,6 +15077,44 @@
{
.vendor = "SST",
+ .name = "SST26VF080A",
+ .bustype = BUS_SPI,
+ .manufacture_id = SST_ID,
+ .model_id = SST_SST26VF080A,
+ .total_size = 1024,
+ .page_size = 256,
+ .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP,
+ .tested = TEST_UNTESTED,
+ .probe = probe_spi_rdid,
+ .probe_timing = TIMING_ZERO,
+ .block_erasers =
+ {
+ {
+ .eraseblocks = { {4 * 1024, 256} },
+ .block_erase = spi_block_erase_20,
+ }, {
+ .eraseblocks = { {32 * 1024, 32} },
+ .block_erase = spi_block_erase_52,
+ }, {
+ .eraseblocks = { {64 * 1024, 16} },
+ .block_erase = spi_block_erase_d8,
+ }, {
+ .eraseblocks = { {1024 * 1024, 1} },
+ .block_erase = spi_block_erase_60,
+ }, {
+ .eraseblocks = { {1024 * 1024, 1} },
+ .block_erase = spi_block_erase_c7,
+ },
+ },
+ .printlock = spi_prettyprint_status_register_bp3_srwd,
+ .unlock = spi_disable_blockprotect_sst26_global_unprotect,
+ .write = spi_chip_write_256, /* Multi I/O supported */
+ .read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */
+ .voltage = {2700, 3600},
+ },
+
+ {
+ .vendor = "SST",
.name = "SST28SF040A",
.bustype = BUS_PARALLEL,
.manufacture_id = SST_ID,