Dediprog SF100 support
Reverse engineered from USB logs. I never touched that programmer nor
did I ever see the associated software.
Disabled by default until it is complete. The driver needs to be hooked
up to the SPI core before it will do anything besides init and
diagnostics.
I successfully reverse engineered all commands, but some are still
somewhat magic.
Logs from "flashrom -p dediprog -V" are appreciated.
Probe and read should work, erase/write is expected to explode.
The programmer will set voltage to 0 on exit.
Thanks a lot to Stefan Reinauer and Patrick Georgi for providing USB
logs and for testing the result.
Corresponding to flashrom svn r870.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Stefan Reinauer <stepan@coresystems.de>
diff --git a/Makefile b/Makefile
index 501f65a..6f6ee83 100644
--- a/Makefile
+++ b/Makefile
@@ -96,6 +96,9 @@
# Always enable Bus Pirate SPI for now.
CONFIG_BUSPIRATESPI ?= yes
+# Disable Dediprog SF100 until support is complete and tested.
+CONFIG_DEDIPROG ?= no
+
# Disable wiki printing by default. It is only useful if you have wiki access.
CONFIG_PRINT_WIKI ?= no
@@ -160,6 +163,12 @@
PROGRAMMER_OBJS += buspirate_spi.o
endif
+ifeq ($(CONFIG_DEDIPROG), yes)
+FEATURE_CFLAGS += -D'DEDIPROG_SUPPORT=1'
+FEATURE_LIBS += -lusb
+PROGRAMMER_OBJS += dediprog.o
+endif
+
# Ugly, but there's no elif/elseif.
ifeq ($(CONFIG_SERPROG), yes)
LIB_OBJS += serial.o
diff --git a/dediprog.c b/dediprog.c
new file mode 100644
index 0000000..3020c00
--- /dev/null
+++ b/dediprog.c
@@ -0,0 +1,388 @@
+/*
+ * This file is part of the flashrom project.
+ *
+ * Copyright (C) 2010 Carl-Daniel Hailfinger
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <string.h>
+#include <stdlib.h>
+#include <ctype.h>
+#include <sys/types.h>
+#include <usb.h>
+#include "flash.h"
+#include "spi.h"
+
+#define DEFAULT_TIMEOUT 3000
+usb_dev_handle *dediprog_handle;
+
+int dediprog_do_stuff(void);
+
+void print_hex(void *buf, size_t len)
+{
+ size_t i;
+
+ for (i = 0; i < len; i++)
+ msg_pdbg(" %02x", ((uint8_t *)buf)[i]);
+}
+
+struct usb_device *get_device_by_vid_pid(uint16_t vid, uint16_t pid)
+{
+ struct usb_bus *bus;
+ struct usb_device *dev;
+
+ for (bus = usb_get_busses(); bus; bus = bus->next)
+ for (dev = bus->devices; dev; dev = dev->next)
+ if ((dev->descriptor.idVendor == vid) &&
+ (dev->descriptor.idProduct == pid))
+ return dev;
+
+ return NULL;
+}
+
+//int usb_control_msg(usb_dev_handle *dev, int requesttype, int request, int value, int index, char *bytes, int size, int timeout);
+
+int dediprog_set_spi_voltage(uint16_t voltage)
+{
+ int ret;
+ unsigned int mv;
+
+ switch (voltage) {
+ case 0x0:
+ /* Admittedly this one is an assumption. */
+ mv = 0;
+ break;
+ case 0x12:
+ mv = 1800;
+ break;
+ case 0x11:
+ mv = 2500;
+ break;
+ case 0x10:
+ mv = 3500;
+ break;
+ default:
+ msg_perr("Unknown voltage selector 0x%x! Aborting.\n", voltage);
+ return 1;
+ }
+ msg_pdbg("Setting SPI voltage to %u.%03u V\n", mv / 1000, mv % 1000);
+
+ ret = usb_control_msg(dediprog_handle, 0x42, 0x9, voltage, 0xff, NULL, 0x0, DEFAULT_TIMEOUT);
+ if (ret != 0x0) {
+ msg_perr("Command Set SPI Voltage 0x%x failed!\n", voltage);
+ return 1;
+ }
+ return 0;
+}
+
+/* After dediprog_set_spi_speed, the original app always calls
+ * dediprog_set_spi_voltage(0) and then
+ * dediprog_check_devicestring() four times in a row.
+ * After that, dediprog_command_a() is called.
+ * This looks suspiciously like the microprocessor in the SF100 has to be
+ * restarted/reinitialized in case the speed changes.
+ */
+int dediprog_set_spi_speed(uint16_t speed)
+{
+ int ret;
+ unsigned int khz;
+
+ /* Case 1 and 2 are in weird order. Probably an organically "grown"
+ * interface.
+ * Base frequency is 24000 kHz, divisors are (in order)
+ * 1, 3, 2, 8, 11, 16, 32, 64.
+ */
+ switch (speed) {
+ case 0x0:
+ khz = 24000;
+ break;
+ case 0x1:
+ khz = 8000;
+ break;
+ case 0x2:
+ khz = 12000;
+ break;
+ case 0x3:
+ khz = 3000;
+ break;
+ case 0x4:
+ khz = 2180;
+ break;
+ case 0x5:
+ khz = 1500;
+ break;
+ case 0x6:
+ khz = 750;
+ break;
+ case 0x7:
+ khz = 375;
+ break;
+ default:
+ msg_perr("Unknown frequency selector 0x%x! Aborting.\n", speed);
+ return 1;
+ }
+ msg_pdbg("Setting SPI speed to %u kHz\n", khz);
+
+ ret = usb_control_msg(dediprog_handle, 0x42, 0x61, speed, 0xff, NULL, 0x0, DEFAULT_TIMEOUT);
+ if (ret != 0x0) {
+ msg_perr("Command Set SPI Speed 0x%x failed!\n", speed);
+ return 1;
+ }
+ return 0;
+}
+
+int dediprog_spi_read(struct flashchip *flash, uint8_t *buf, int start, int len)
+{
+ /* Maximum read length is 4 bytes for now. */
+ return spi_read_chunked(flash, buf, start, len, 4);
+}
+
+int dediprog_spi_send_command(unsigned int writecnt, unsigned int readcnt,
+ const unsigned char *writearr, unsigned char *readarr)
+{
+ int ret;
+
+ /* Paranoid, but I don't want to be blamed if anything explodes. */
+ if ((writecnt != 1) && (writecnt != 4))
+ msg_perr("Untested writecnt=%i, aborting.\n", writecnt);
+ if (readcnt > 4)
+ msg_perr("Untested readcnt=%i, aborting.\n", readcnt);
+ if ((readcnt == 0) && (writecnt != 1))
+ msg_perr("Untested writecnt=%i, readcnt=%i combination, "
+ "aborting.\n", writecnt, readcnt);
+
+ ret = usb_control_msg(dediprog_handle, 0x42, 0x1, 0xff, readcnt ? 0x1 : 0x0, (char *)writearr, writecnt, DEFAULT_TIMEOUT);
+ if (ret != writecnt) {
+ msg_perr("Command Send SPI failed, ret=%i, expected %i!\n",
+ ret, writecnt);
+ return 1;
+ }
+ if (!readcnt)
+ return 0;
+ memset(readarr, 0, readcnt);
+ ret = usb_control_msg(dediprog_handle, 0xc2, 0x01, 0xbb8, 0x0000, (char *)readarr, readcnt, DEFAULT_TIMEOUT);
+ if (ret != readcnt) {
+ msg_perr("Command Receive SPI failed, ret=%i, expected %i!\n",
+ ret, readcnt);
+ return 1;
+ }
+ return 0;
+}
+
+int dediprog_check_devicestring(void)
+{
+ int ret;
+ char buf[0x11];
+
+ /* Command Prepare Receive Device String. */
+ memset(buf, 0, sizeof(buf));
+ ret = usb_control_msg(dediprog_handle, 0xc3, 0x7, 0x0, 0xef03, buf, 0x1, DEFAULT_TIMEOUT);
+ /* The char casting is needed to stop gcc complaining about an always true comparison. */
+ if ((ret != 0x1) || (buf[0] != (char)0xff)) {
+ msg_perr("Unexpected response to Command Prepare Receive Device"
+ " String!\n");
+ return 1;
+ }
+ /* Command Receive Device String. */
+ memset(buf, 0, sizeof(buf));
+ ret = usb_control_msg(dediprog_handle, 0xc2, 0x8, 0xff, 0xff, buf, 0x10, DEFAULT_TIMEOUT);
+ if (ret != 0x10) {
+ msg_perr("Incomplete/failed Command Receive Device String!\n");
+ return 1;
+ }
+ buf[0x10] = '\0';
+ msg_pdbg("Found a %s\n", buf);
+ if (memcmp(buf, "SF100", 0x5)) {
+ msg_perr("Device not a SF100!\n");
+ return 1;
+ }
+ /* Only these versions were tested. */
+ if (memcmp(buf, "SF100 V:2.1.1 ", 0x10) &&
+ memcmp(buf, "SF100 V:3.1.8 ", 0x10)) {
+ msg_perr("Unexpected firmware version!\n");
+ return 1;
+ }
+ return 0;
+}
+
+/* Command A seems to be some sort of device init. It is either followed by
+ * dediprog_check_devicestring (often) or Command A (often) or
+ * Command F (once).
+ */
+int dediprog_command_a(void)
+{
+ int ret;
+ char buf[0x1];
+
+ memset(buf, 0, sizeof(buf));
+ ret = usb_control_msg(dediprog_handle, 0xc3, 0xb, 0x0, 0x0, buf, 0x1, DEFAULT_TIMEOUT);
+ if ((ret != 0x1) || (buf[0] != 0x6f)) {
+ msg_perr("Unexpected response to Command A!\n");
+ return 1;
+ }
+ return 0;
+}
+
+/* Command C is only sent after dediprog_check_devicestring, but not after every
+ * invocation of dediprog_check_devicestring. It is only sent after the first
+ * dediprog_command_a(); dediprog_check_devicestring() sequence in each session.
+ * I'm tempted to call this one start_SPI_engine or finish_init.
+ */
+int dediprog_command_c(void)
+{
+ int ret;
+
+ ret = usb_control_msg(dediprog_handle, 0x42, 0x4, 0x0, 0x0, NULL, 0x0, DEFAULT_TIMEOUT);
+ if (ret != 0x0) {
+ msg_perr("Unexpected response to Command C!\n");
+ return 1;
+ }
+ return 0;
+}
+
+/* Very strange. Seems to be a programmer keepalive or somesuch.
+ * Wait unsuccessfully for timeout ms to read one byte.
+ * Is usually called after setting voltage to 0.
+ */
+int dediprog_command_f(int timeout)
+{
+ int ret;
+ char buf[0x1];
+
+ memset(buf, 0, sizeof(buf));
+ ret = usb_control_msg(dediprog_handle, 0xc2, 0x11, 0xff, 0xff, buf, 0x1, timeout);
+ if (ret != 0x0) {
+ msg_perr("Unexpected response to Command F!\n");
+ return 1;
+ }
+ return 0;
+}
+
+/* URB numbers refer to the first log ever captured. */
+int dediprog_init(void)
+{
+ struct usb_device *dev;
+
+ msg_pspew("%s\n", __func__);
+
+ /* Here comes the USB stuff. */
+ usb_init();
+ usb_find_busses();
+ usb_find_devices();
+ dev = get_device_by_vid_pid(0x0483, 0xdada);
+ if (!dev) {
+ msg_perr("Could not find a Dediprog SF100 on USB!\n");
+ return 1;
+ }
+ msg_pdbg("Found USB device (%04x:%04x).\n",
+ dev->descriptor.idVendor,
+ dev->descriptor.idProduct);
+ dediprog_handle = usb_open(dev);
+ /* URB 6. Command A. */
+ if (dediprog_command_a())
+ return 1;
+ /* URB 7. Command A. */
+ if (dediprog_command_a())
+ return 1;
+ /* URB 8. Command Prepare Receive Device String. */
+ /* URB 9. Command Receive Device String. */
+ if (dediprog_check_devicestring())
+ return 1;
+ /* URB 10. Command C. */
+ if (dediprog_command_c())
+ return 1;
+ /* URB 11. Command Set SPI Voltage. */
+ if (dediprog_set_spi_voltage(0x10))
+ return 1;
+
+ buses_supported = CHIP_BUSTYPE_SPI;
+ spi_controller = SPI_CONTROLLER_DEDIPROG;
+
+ /* RE leftover, leave in until the driver is complete. */
+#if 0
+ /* Execute RDID by hand if you want to test it. */
+ dediprog_do_stuff();
+#endif
+
+ return 0;
+}
+
+/* Leftovers from reverse engineering. Keep for documentation purposes until
+ * completely understood.
+ */
+int dediprog_do_stuff(void)
+{
+ char buf[0x4];
+ /* SPI command processing starts here. */
+
+ /* URB 12. Command Send SPI. */
+ /* URB 13. Command Receive SPI. */
+ memset(buf, 0, sizeof(buf));
+ /* JEDEC RDID */
+ msg_pdbg("Sending RDID\n");
+ buf[0] = JEDEC_RDID;
+ if (dediprog_spi_send_command(JEDEC_RDID_OUTSIZE, JEDEC_RDID_INSIZE, (unsigned char *)buf, (unsigned char *)buf))
+ return 1;
+ msg_pdbg("Receiving response: ");
+ print_hex(buf, JEDEC_RDID_INSIZE);
+#if 0
+ /* URB 14-27 are more SPI commands. */
+ /* URB 28. Command Set SPI Voltage. */
+ if (dediprog_set_spi_voltage(0x0))
+ return 1;
+ /* URB 29-38. Command F, unsuccessful wait. */
+ if (dediprog_command_f(544))
+ return 1;
+ /* URB 39. Command Set SPI Voltage. */
+ if (dediprog_set_spi_voltage(0x10))
+ return 1;
+ /* URB 40. Command Set SPI Speed. */
+ if (dediprog_set_spi_speed(0x2))
+ return 1;
+ /* URB 41 is just URB 28. */
+ /* URB 42,44,46,48,51,53 is just URB 8. */
+ /* URB 43,45,47,49,52,54 is just URB 9. */
+ /* URB 50 is just URB 6/7. */
+ /* URB 55-131 is just URB 29-38. (wait unsuccessfully for 4695 (maybe 4751) ms)*/
+ /* URB 132,134 is just URB 6/7. */
+ /* URB 133 is just URB 29-38. */
+ /* URB 135 is just URB 8. */
+ /* URB 136 is just URB 9. */
+ /* URB 137 is just URB 11. */
+
+ /* Command I is probably Start Bulk Read. Data is u16 blockcount, u16 blocksize. */
+ /* Command J is probably Start Bulk Write. Data is u16 blockcount, u16 blocksize. */
+ /* Bulk transfer sizes for Command I/J are always 512 bytes, rest is filled with 0xff. */
+#endif
+
+ msg_pinfo("All probes will fail because this driver is not hooked up "
+ "to the SPI infrastructure yet.");
+ return 0;
+}
+
+int dediprog_shutdown(void)
+{
+ msg_pspew("%s\n", __func__);
+
+ /* URB 28. Command Set SPI Voltage to 0. */
+ if (dediprog_set_spi_voltage(0x0))
+ return 1;
+
+ if (usb_close(dediprog_handle)) {
+ msg_perr("Couldn't close USB device!\n");
+ return 1;
+ }
+ return 0;
+}
diff --git a/flash.h b/flash.h
index 9a25c70..65fa685 100644
--- a/flash.h
+++ b/flash.h
@@ -67,6 +67,9 @@
#if BUSPIRATE_SPI_SUPPORT == 1
PROGRAMMER_BUSPIRATESPI,
#endif
+#if DEDIPROG_SUPPORT == 1
+ PROGRAMMER_DEDIPROG,
+#endif
PROGRAMMER_INVALID /* This must always be the last entry. */
};
@@ -470,6 +473,12 @@
int buspirate_spi_send_command(unsigned int writecnt, unsigned int readcnt, const unsigned char *writearr, unsigned char *readarr);
int buspirate_spi_read(struct flashchip *flash, uint8_t *buf, int start, int len);
+/* dediprog.c */
+int dediprog_init(void);
+int dediprog_shutdown(void);
+int dediprog_spi_send_command(unsigned int writecnt, unsigned int readcnt, const unsigned char *writearr, unsigned char *readarr);
+int dediprog_spi_read(struct flashchip *flash, uint8_t *buf, int start, int len);
+
/* flashrom.c */
extern enum chipbustype buses_supported;
struct decode_sizes {
@@ -553,6 +562,9 @@
#if BUSPIRATE_SPI_SUPPORT == 1
SPI_CONTROLLER_BUSPIRATE,
#endif
+#if DEDIPROG_SUPPORT == 1
+ SPI_CONTROLLER_DEDIPROG,
+#endif
SPI_CONTROLLER_INVALID /* This must always be the last entry. */
};
extern const int spi_programmer_count;
diff --git a/flashrom.c b/flashrom.c
index bba7a3a..c3e32a1 100644
--- a/flashrom.c
+++ b/flashrom.c
@@ -44,7 +44,7 @@
* if more than one of them is selected. If only one is selected, it is clear
* that the user wants that one to become the default.
*/
-#if NIC3COM_SUPPORT+GFXNVIDIA_SUPPORT+DRKAISER_SUPPORT+SATASII_SUPPORT+FT2232_SPI_SUPPORT+SERPROG_SUPPORT+BUSPIRATE_SPI_SUPPORT > 1
+#if NIC3COM_SUPPORT+GFXNVIDIA_SUPPORT+DRKAISER_SUPPORT+SATASII_SUPPORT+FT2232_SPI_SUPPORT+SERPROG_SUPPORT+BUSPIRATE_SPI_SUPPORT+DEDIPROG_SUPPORT > 1
#error Please enable either CONFIG_DUMMY or CONFIG_INTERNAL or disable support for all external programmers except one.
#endif
enum programmer programmer =
@@ -69,6 +69,9 @@
#if BUSPIRATE_SPI_SUPPORT == 1
PROGRAMMER_BUSPIRATESPI
#endif
+#if DEDIPROG_SUPPORT == 1
+ PROGRAMMER_DEDIPROG
+#endif
;
#endif
@@ -283,6 +286,25 @@
},
#endif
+#if DEDIPROG_SUPPORT == 1
+ {
+ .name = "dediprog",
+ .init = dediprog_init,
+ .shutdown = dediprog_shutdown,
+ .map_flash_region = fallback_map,
+ .unmap_flash_region = fallback_unmap,
+ .chip_readb = noop_chip_readb,
+ .chip_readw = fallback_chip_readw,
+ .chip_readl = fallback_chip_readl,
+ .chip_readn = fallback_chip_readn,
+ .chip_writeb = noop_chip_writeb,
+ .chip_writew = fallback_chip_writew,
+ .chip_writel = fallback_chip_writel,
+ .chip_writen = fallback_chip_writen,
+ .delay = internal_delay,
+ },
+#endif
+
{}, /* This entry corresponds to PROGRAMMER_INVALID. */
};
diff --git a/spi.c b/spi.c
index 685c917..aaf7d88 100644
--- a/spi.c
+++ b/spi.c
@@ -111,6 +111,15 @@
},
#endif
+#if DEDIPROG_SUPPORT == 1
+ { /* SPI_CONTROLLER_DEDIPROG */
+ .command = dediprog_spi_send_command,
+ .multicommand = default_spi_send_multicommand,
+ .read = dediprog_spi_read,
+ .write_256 = spi_chip_write_1,
+ },
+#endif
+
{}, /* This entry corresponds to SPI_CONTROLLER_INVALID. */
};