Random flashrom updates
- Add explicit installation instructions in the README.
- Code cleanups, coding style fixes, drop dead code.
- Drop duplicate board listings from -L output (some boards were explicitly
recorded in boards_ok[] _and_ implicitly via the board-enables table.
- Add MS-xxxx numbers to MSI boards where we can find that info.
- Fix typo, "K8T Neo2" should have been "K8T Neo2-F" actually, at least
according to the comment of w83627thf_gpio4_4_raise_2e() which says
"Suited for: MSI K8T Neo2-F".
Corresponding to flashrom svn r554.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
diff --git a/README b/README
index 7df2f5e..81e51cb 100644
--- a/README
+++ b/README
@@ -15,7 +15,7 @@
(see http://coreboot.org for details on coreboot)
-Build Requirements
+Build Instructions
------------------
To build flashrom you need to install the following packages or ports:
@@ -55,6 +55,18 @@
DirectIO is available at http://www.coresystems.de/en/directio.
+Installation
+------------
+
+In order to install flashrom and the manpage into /usr/local, type:
+
+ sudo make install
+
+For installation in a different directory use DESTDIR, e.g. like this:
+
+ sudo make DESTDIR=/usr install
+
+
Usage / Options
---------------
diff --git a/board_enable.c b/board_enable.c
index ec1ae5d..b073ed6 100644
--- a/board_enable.c
+++ b/board_enable.c
@@ -688,10 +688,10 @@
/* Note: There are >= 2 version of the Kontron 986LCD-M/mITX! */
{0x8086, 0x27b8, 0, 0, 0, 0, 0, 0, "kontron", "986lcd-m", "Kontron", "986LCD-M", board_kontron_986lcd_m},
{0x10ec, 0x8168, 0x10ec, 0x8168, 0x104c, 0x8023, 0x104c, 0x8019, "kontron", "986lcd-m", "Kontron", "986LCD-M", board_kontron_986lcd_m},
- {0x10de, 0x005e, 0, 0, 0, 0, 0, 0, "msi", "k8n-neo3", "MSI", "K8N Neo3", w83627thf_gpio4_4_raise_4e},
- {0x1106, 0x3149, 0x1462, 0x7094, 0x10ec, 0x8167, 0x1462, 0x094c, NULL, NULL, "MSI", "K8T Neo2", w83627thf_gpio4_4_raise_2e},
- {0x1106, 0x0571, 0x1462, 0x7120, 0, 0, 0, 0, "msi", "kt4v", "MSI", "KT4V", board_msi_kt4v},
- {0x13f6, 0x0111, 0x1462, 0x5900, 0x1106, 0x3177, 0x1106, 0, "msi", "kt4ultra", "MSI", "KT4 Ultra", board_msi_kt4v},
+ {0x10de, 0x005e, 0, 0, 0, 0, 0, 0, "msi", "k8n-neo3", "MSI", "MS-7135 (K8N Neo3)", w83627thf_gpio4_4_raise_4e},
+ {0x1106, 0x3149, 0x1462, 0x7094, 0x10ec, 0x8167, 0x1462, 0x094c, NULL, NULL, "MSI", "MS-6702E (K8T Neo2-F)",w83627thf_gpio4_4_raise_2e},
+ {0x1106, 0x0571, 0x1462, 0x7120, 0, 0, 0, 0, "msi", "kt4v", "MSI", "MS-6712 (KT4V)", board_msi_kt4v},
+ {0x13f6, 0x0111, 0x1462, 0x5900, 0x1106, 0x3177, 0x1106, 0, "msi", "kt4ultra", "MSI", "MS-6590 (KT4 Ultra)",board_msi_kt4v},
{0x8086, 0x2658, 0x1462, 0x7046, 0x1106, 0x3044, 0x1462, 0x046d, NULL, NULL, "MSI", "MS-7046", ich6_gpio19_raise},
{0x8086, 0x1076, 0x8086, 0x1176, 0x1106, 0x3059, 0x10f1, 0x2498, NULL, NULL, "Tyan", "S2498 (Tomcat K7M)", board_asus_a7v8x_mx},
{0x1106, 0x0314, 0x1106, 0xaa08, 0x1106, 0x3227, 0x1106, 0xAA08, NULL, NULL, "VIA", "EPIA-CN", board_via_epia_sp},
@@ -721,7 +721,6 @@
{ "ASUS", "A7N8X Deluxe", },
{ "ASUS", "A7V400-MX", },
{ "ASUS", "A7V8X-MX", },
- { "ASUS", "P4B266", },
{ "ASUS", "A8V-E SE", },
{ "ASUS", "P2L97-S", },
{ "ASUS", "M2A-MX", },
@@ -734,9 +733,7 @@
{ "GIGABYTE", "GA-6ZMA", },
{ "Intel", "EP80759", },
{ "Jetway", "J7F4K1G5D-PB", },
- { "MSI", "K7N2", },
- { "MSI", "KT4V", },
- { "MSI", "MS-7046", },
+ { "MSI", "MS-6570 (K7N2)", },
{ "MSI", "MS-7065", },
{ "MSI", "MS-7236 (945PL Neo3)", },
{ "MSI", "MS-7345 (P35 Neo2-FIR)", },
@@ -771,9 +768,6 @@
{ "Tyan", "S5376G2NR/S5376WAG2NR", },
{ "Tyan", "S5377", },
{ "Tyan", "S5397", },
- { "VIA", "EPIA-M", },
- { "VIA", "EPIA-MII", },
- { "VIA", "EPIA-CN", },
{ "VIA", "EPIA-LN", },
{ "VIA", "VB700X", },
{ "VIA", "NAB74X0", },
diff --git a/flash.h b/flash.h
index 15b0636..3151646 100644
--- a/flash.h
+++ b/flash.h
@@ -92,7 +92,8 @@
int (*init) (void);
int (*shutdown) (void);
- void * (*map_flash_region) (const char *descr, unsigned long phys_addr, size_t len);
+ void * (*map_flash_region) (const char *descr, unsigned long phys_addr,
+ size_t len);
void (*unmap_flash_region) (void *virt_addr, size_t len);
void (*chip_writeb) (uint8_t val, chipaddr addr);
@@ -151,20 +152,20 @@
#define TEST_UNTESTED 0
-#define TEST_OK_PROBE (1<<0)
-#define TEST_OK_READ (1<<1)
-#define TEST_OK_ERASE (1<<2)
-#define TEST_OK_WRITE (1<<3)
-#define TEST_OK_PR (TEST_OK_PROBE|TEST_OK_READ)
-#define TEST_OK_PRE (TEST_OK_PROBE|TEST_OK_READ|TEST_OK_ERASE)
-#define TEST_OK_PREW (TEST_OK_PROBE|TEST_OK_READ|TEST_OK_ERASE|TEST_OK_WRITE)
+#define TEST_OK_PROBE (1 << 0)
+#define TEST_OK_READ (1 << 1)
+#define TEST_OK_ERASE (1 << 2)
+#define TEST_OK_WRITE (1 << 3)
+#define TEST_OK_PR (TEST_OK_PROBE | TEST_OK_READ)
+#define TEST_OK_PRE (TEST_OK_PROBE | TEST_OK_READ | TEST_OK_ERASE)
+#define TEST_OK_PREW (TEST_OK_PROBE | TEST_OK_READ | TEST_OK_ERASE | TEST_OK_WRITE)
#define TEST_OK_MASK 0x0f
-#define TEST_BAD_PROBE (1<<4)
-#define TEST_BAD_READ (1<<5)
-#define TEST_BAD_ERASE (1<<6)
-#define TEST_BAD_WRITE (1<<7)
-#define TEST_BAD_PREW (TEST_BAD_PROBE|TEST_BAD_READ|TEST_BAD_ERASE|TEST_BAD_WRITE)
+#define TEST_BAD_PROBE (1 << 4)
+#define TEST_BAD_READ (1 << 5)
+#define TEST_BAD_ERASE (1 << 6)
+#define TEST_BAD_WRITE (1 << 7)
+#define TEST_BAD_PREW (TEST_BAD_PROBE | TEST_BAD_READ | TEST_BAD_ERASE | TEST_BAD_WRITE)
#define TEST_BAD_MASK 0xf0
extern struct flashchip flashchips[];
@@ -534,7 +535,7 @@
* byte of device ID is related to log(bitsize).
*/
#define WINBOND_ID 0xDA /* Winbond */
-#define WINBOND_NEX_ID 0xEF /* Winbond (ex Nexcom) serial flash devices */
+#define WINBOND_NEX_ID 0xEF /* Winbond (ex Nexcom) serial flashes */
#define W_25X10 0x3011
#define W_25X20 0x3012
#define W_25X40 0x3013
@@ -659,8 +660,6 @@
/* nic3com.c */
int nic3com_init(void);
int nic3com_shutdown(void);
-void *nic3com_map(const char *descr, unsigned long phys_addr, size_t len);
-void nic3com_unmap(void *virt_addr, size_t len);
void nic3com_chip_writeb(uint8_t val, chipaddr addr);
uint8_t nic3com_chip_readb(const chipaddr addr);
extern struct pcidev_status nics_3com[];
@@ -668,8 +667,6 @@
/* satasii.c */
int satasii_init(void);
int satasii_shutdown(void);
-void *satasii_map(const char *descr, unsigned long phys_addr, size_t len);
-void satasii_unmap(void *virt_addr, size_t len);
void satasii_chip_writeb(uint8_t val, chipaddr addr);
uint8_t satasii_chip_readb(const chipaddr addr);
extern struct pcidev_status satas_sii[];
@@ -850,7 +847,8 @@
/* wbsio_spi.c */
int wbsio_check_for_spi(const char *name);
-int wbsio_spi_command(unsigned int writecnt, unsigned int readcnt, const unsigned char *writearr, unsigned char *readarr);
+int wbsio_spi_command(unsigned int writecnt, unsigned int readcnt,
+ const unsigned char *writearr, unsigned char *readarr);
int wbsio_spi_read(struct flashchip *flash, uint8_t *buf);
int wbsio_spi_write_1(struct flashchip *flash, uint8_t *buf);