ichspi: add (partially) dead support code for Intel Hardware Sequencing
This was done to ease the review. Another patch will hook up (and
explain) this code later.
Corresponding to flashrom svn r1452.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
diff --git a/ichspi.c b/ichspi.c
index e30c267..afa420b 100644
--- a/ichspi.c
+++ b/ichspi.c
@@ -26,6 +26,7 @@
#if defined(__i386__) || defined(__x86_64__)
#include <string.h>
+#include <stdlib.h>
#include "flash.h"
#include "programmer.h"
#include "spi.h"
@@ -1080,6 +1081,77 @@
return result;
}
+#if 0
+/* Sets FLA in FADDR to (addr & 0x01FFFFFF) without touching other bits. */
+static void ich_hwseq_set_addr(uint32_t addr)
+{
+ uint32_t addr_old = REGREAD32(ICH9_REG_FADDR) & ~0x01FFFFFF;
+ REGWRITE32(ICH9_REG_FADDR, (addr & 0x01FFFFFF) | addr_old);
+}
+
+/* Sets FADDR.FLA to 'addr' and returns the erase block size in bytes
+ * of the block containing this address. May return nonsense if the address is
+ * not valid. The erase block size for a specific address depends on the flash
+ * partition layout as specified by FPB and the partition properties as defined
+ * by UVSCC and LVSCC respectively. An alternative to implement this method
+ * would be by querying FPB and the respective VSCC register directly.
+ */
+static uint32_t ich_hwseq_get_erase_block_size(unsigned int addr)
+{
+ uint8_t enc_berase;
+ static const uint32_t const dec_berase[4] = {
+ 256,
+ 4 * 1024,
+ 8 * 1024,
+ 64 * 1024
+ };
+
+ ich_hwseq_set_addr(addr);
+ enc_berase = (REGREAD16(ICH9_REG_HSFS) & HSFS_BERASE) >>
+ HSFS_BERASE_OFF;
+ return dec_berase[enc_berase];
+}
+
+/* Polls for Cycle Done Status, Flash Cycle Error or timeout in 8 us intervals.
+ Resets all error flags in HSFS.
+ Returns 0 if the cycle completes successfully without errors within
+ timeout us, 1 on errors. */
+static int ich_hwseq_wait_for_cycle_complete(unsigned int timeout,
+ unsigned int len)
+{
+ uint16_t hsfs;
+ uint32_t addr;
+
+ timeout /= 8; /* scale timeout duration to counter */
+ while ((((hsfs = REGREAD16(ICH9_REG_HSFS)) &
+ (HSFS_FDONE | HSFS_FCERR)) == 0) &&
+ --timeout) {
+ programmer_delay(8);
+ }
+ REGWRITE16(ICH9_REG_HSFS, REGREAD16(ICH9_REG_HSFS));
+ if (!timeout) {
+ addr = REGREAD32(ICH9_REG_FADDR) & 0x01FFFFFF;
+ msg_perr("Timeout error between offset 0x%08x and "
+ "0x%08x + %d (=0x%08x)!\n",
+ addr, addr, len - 1, addr + len - 1);
+ prettyprint_ich9_reg_hsfs(hsfs);
+ prettyprint_ich9_reg_hsfc(REGREAD16(ICH9_REG_HSFC));
+ return 1;
+ }
+
+ if (hsfs & HSFS_FCERR) {
+ addr = REGREAD32(ICH9_REG_FADDR) & 0x01FFFFFF;
+ msg_perr("Transaction error between offset 0x%08x and "
+ "0x%08x (=0x%08x + %d)!\n",
+ addr, addr + len - 1, addr, len - 1);
+ prettyprint_ich9_reg_hsfs(hsfs);
+ prettyprint_ich9_reg_hsfc(REGREAD16(ICH9_REG_HSFC));
+ return 1;
+ }
+ return 0;
+}
+#endif
+
static int ich_spi_send_multicommand(struct spi_command *cmds)
{
int ret = 0;
@@ -1250,21 +1322,18 @@
uint8_t old, new;
uint16_t spibar_offset, tmp2;
uint32_t tmp;
- int ichspi_desc = 0;
+ int desc_valid = 0;
switch (ich_generation) {
case 7:
- register_spi_programmer(&spi_programmer_ich7);
spibar_offset = 0x3020;
break;
case 8:
- register_spi_programmer(&spi_programmer_ich9);
spibar_offset = 0x3020;
break;
case 9:
case 10:
default: /* Future version might behave the same */
- register_spi_programmer(&spi_programmer_ich9);
spibar_offset = 0x3800;
break;
}
@@ -1275,8 +1344,8 @@
/* Assign Virtual Address */
ich_spibar = rcrb + spibar_offset;
- switch (spi_programmer->type) {
- case SPI_CONTROLLER_ICH7:
+ switch (ich_generation) {
+ case 7:
msg_pdbg("0x00: 0x%04x (SPIS)\n",
mmio_readw(ich_spibar + 0));
msg_pdbg("0x02: 0x%04x (SPIC)\n",
@@ -1313,9 +1382,13 @@
ichspi_lock = 1;
}
ich_set_bbar(ich_generation, 0);
+ register_spi_programmer(&spi_programmer_ich7);
ich_init_opcodes();
break;
- case SPI_CONTROLLER_ICH9:
+ case 8:
+ case 9:
+ case 10:
+ default: /* Future version might behave the same */
tmp2 = mmio_readw(ich_spibar + ICH9_REG_HSFS);
msg_pdbg("0x04: 0x%04x (HSFS)\n", tmp2);
prettyprint_ich9_reg_hsfs(tmp2);
@@ -1324,8 +1397,8 @@
ichspi_lock = 1;
}
if (tmp2 & HSFS_FDV)
- ichspi_desc = 1;
- if (!(tmp2 & HSFS_FDOPSS) && ichspi_desc)
+ desc_valid = 1;
+ if (!(tmp2 & HSFS_FDOPSS) && desc_valid)
msg_pinfo("The Flash Descriptor Security Override "
"Strap-Pin is set. Restrictions implied\n"
"by the FRAP and FREG registers are NOT in "
@@ -1400,18 +1473,16 @@
}
msg_pdbg("\n");
- if (ichspi_desc) {
+ if (desc_valid) {
struct ich_descriptors desc = {{ 0 }};
if (read_ich_descriptors_via_fdo(ich_spibar, &desc) ==
ICH_RET_OK)
prettyprint_ich_descriptors(CHIPSET_ICH_UNKNOWN,
&desc);
}
+ register_spi_programmer(&spi_programmer_ich9);
ich_init_opcodes();
break;
- default:
- /* Nothing */
- break;
}
old = pci_read_byte(dev, 0xdc);