Add support for Atmel (now Adesto) AT25DL081 and AT25DL161
Corresponding to flashrom svn r1810.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
diff --git a/flashchips.c b/flashchips.c
index 353575d..1bb6f27 100644
--- a/flashchips.c
+++ b/flashchips.c
@@ -1709,6 +1709,84 @@
{
.vendor = "Atmel",
+ .name = "AT25DL081",
+ .bustype = BUS_SPI,
+ .manufacture_id = ATMEL_ID,
+ .model_id = ATMEL_AT25DF081,
+ .total_size = 1024,
+ .page_size = 256,
+ /* OTP: 128B total, 64B pre-programmed; read 0x77; write 0x9B */
+ .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP,
+ .tested = TEST_UNTESTED,
+ .probe = probe_spi_rdid,
+ .probe_timing = TIMING_ZERO,
+ .block_erasers =
+ {
+ {
+ .eraseblocks = { {4 * 1024, 256} },
+ .block_erase = spi_block_erase_20,
+ }, {
+ .eraseblocks = { {32 * 1024, 32} },
+ .block_erase = spi_block_erase_52,
+ }, {
+ .eraseblocks = { {64 * 1024, 16} },
+ .block_erase = spi_block_erase_d8,
+ }, {
+ .eraseblocks = { {1 * 1024 * 1024, 1} },
+ .block_erase = spi_block_erase_60,
+ }, {
+ .eraseblocks = { {1 * 1024 * 1024, 1} },
+ .block_erase = spi_block_erase_c7,
+ }
+ },
+ .printlock = spi_prettyprint_status_register_at25df_sec,
+ .unlock = spi_disable_blockprotect_at2x_global_unprotect_sec,
+ .write = spi_chip_write_256, /* Dual I/O (0xA2) supported */
+ .read = spi_chip_read, /* Fast read (0x0B), dual I/O (0x3B) supported */
+ .voltage = {1650, 1950},
+ },
+
+ {
+ .vendor = "Atmel",
+ .name = "AT25DL161",
+ .bustype = BUS_SPI,
+ .manufacture_id = ATMEL_ID,
+ .model_id = ATMEL_AT25DL161,
+ .total_size = 2048,
+ .page_size = 256,
+ /* OTP: 128B total, 64B pre-programmed; read 0x77; write 0x9B */
+ .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP,
+ .tested = TEST_UNTESTED,
+ .probe = probe_spi_rdid,
+ .probe_timing = TIMING_ZERO,
+ .block_erasers =
+ {
+ {
+ .eraseblocks = { {4 * 1024, 512} },
+ .block_erase = spi_block_erase_20,
+ }, {
+ .eraseblocks = { {32 * 1024, 64} },
+ .block_erase = spi_block_erase_52,
+ }, {
+ .eraseblocks = { {64 * 1024, 32} },
+ .block_erase = spi_block_erase_d8,
+ }, {
+ .eraseblocks = { {2 * 1024 * 1024, 1} },
+ .block_erase = spi_block_erase_60,
+ }, {
+ .eraseblocks = { {2 * 1024 * 1024, 1} },
+ .block_erase = spi_block_erase_c7,
+ }
+ },
+ .printlock = spi_prettyprint_status_register_at25df_sec,
+ .unlock = spi_disable_blockprotect_at2x_global_unprotect_sec,
+ .write = spi_chip_write_256, /* Dual I/O (0xA2) supported */
+ .read = spi_chip_read, /* Fast read (0x0B), dual I/O (0x3B) supported */
+ .voltage = {1650, 1950},
+ },
+
+ {
+ .vendor = "Atmel",
.name = "AT25DQ161",
.bustype = BUS_SPI,
.manufacture_id = ATMEL_ID,