diff --git a/flashchips.c b/flashchips.c
index ec8cdf9..bd44491 100644
--- a/flashchips.c
+++ b/flashchips.c
@@ -22097,6 +22097,229 @@
 	},
 
 	{
+		.vendor		= "XTX Technology",
+		.name		= "XT25F16B",
+		.bustype	= BUS_SPI,
+		.manufacture_id	= XTX_ID,
+		.model_id	= XTX_XT25F16B,
+		.total_size	= 2048,
+		.page_size	= 256,
+		.feature_bits	= FEATURE_WRSR_EITHER | FEATURE_WRSR_EXT2 |
+				  FEATURE_OTP | FEATURE_QIO,
+		.tested		= TEST_UNTESTED,
+		.probe		= probe_spi_rdid,
+		.probe_timing	= TIMING_ZERO,
+		.block_erasers	=
+		{
+			{
+				.eraseblocks = { {4 * 1024, 512} },
+				.block_erase = spi_block_erase_20,
+			}, {
+				.eraseblocks = { {32 * 1024, 64} },
+				.block_erase = spi_block_erase_52,
+			}, {
+				.eraseblocks = { {64 * 1024, 32} },
+				.block_erase = spi_block_erase_d8,
+			}, {
+				.eraseblocks = { {2048 * 1024, 1} },
+				.block_erase = spi_block_erase_60,
+			}, {
+				.eraseblocks = { {2048 * 1024, 1} },
+				.block_erase = spi_block_erase_c7,
+			},
+		},
+		.reg_bits	=
+		{
+			.qe	= {STATUS2, 1, RW},
+			.srp    = {STATUS1, 7, RW},
+			.bp     = {{STATUS1, 2, RW}, {STATUS1, 3, RW}, {STATUS1, 4, RW}},
+			.tb     = {STATUS1, 5, RW}, /* Called BP3 in datasheet, acts like TB */
+			.sec    = {STATUS1, 6, RW}, /* Called BP4 in datasheet, acts like SEC */
+			.cmp    = {STATUS2, 6, RW},
+		},
+		.wp_write_cfg	= spi_wp_write_cfg,
+		.wp_read_cfg	= spi_wp_read_cfg,
+		.wp_get_ranges	= spi_wp_get_available_ranges,
+		.decode_range	= decode_range_spi25,
+		.printlock	= spi_prettyprint_status_register_bp4_srwd,
+		.unlock		= spi_disable_blockprotect_bp4_srwd,
+		.write		= spi_chip_write_256,
+		.read		= spi_chip_read,
+		.voltage	= {2700, 3600},
+		.prepare_access	= spi_prepare_io,
+		.finish_access	= spi_finish_io,
+	},
+
+	{
+		.vendor		= "XTX Technology",
+		.name		= "XT25F32B",
+		.bustype	= BUS_SPI,
+		.manufacture_id	= XTX_ID,
+		.model_id	= XTX_XT25F32B,
+		.total_size	= 4096,
+		.page_size	= 256,
+		.feature_bits	= FEATURE_WRSR_EITHER | FEATURE_WRSR_EXT2 |
+				  FEATURE_OTP | FEATURE_QPI_SRP,
+		.dummy_cycles	= { .qpi_read_params = { 4, 4, 6, 8 } },
+		.tested		= TEST_UNTESTED,
+		.probe		= probe_spi_rdid,
+		.probe_timing	= TIMING_ZERO,
+		.block_erasers	=
+		{
+			{
+				.eraseblocks = { {4 * 1024, 1024} },
+				.block_erase = spi_block_erase_20,
+			}, {
+				.eraseblocks = { {32 * 1024, 128} },
+				.block_erase = spi_block_erase_52,
+			}, {
+				.eraseblocks = { {64 * 1024, 64} },
+				.block_erase = spi_block_erase_d8,
+			}, {
+				.eraseblocks = { {4096 * 1024, 1} },
+				.block_erase = spi_block_erase_60,
+			}, {
+				.eraseblocks = { {4096 * 1024, 1} },
+				.block_erase = spi_block_erase_c7,
+			},
+		},
+		.reg_bits	=
+		{
+			.qe	= {STATUS2, 1, RW},
+			.srp    = {STATUS1, 7, RW},
+			.srl    = {STATUS2, 0, RW},
+			.bp     = {{STATUS1, 2, RW}, {STATUS1, 3, RW}, {STATUS1, 4, RW}},
+			.tb     = {STATUS1, 5, RW}, /* Called BP3 in datasheet, acts like TB */
+			.sec    = {STATUS1, 6, RW}, /* Called BP4 in datasheet, acts like SEC */
+			.cmp    = {STATUS2, 6, RW},
+		},
+		.wp_write_cfg	= spi_wp_write_cfg,
+		.wp_read_cfg	= spi_wp_read_cfg,
+		.wp_get_ranges	= spi_wp_get_available_ranges,
+		.decode_range	= decode_range_spi25,
+		.printlock	= spi_prettyprint_status_register_bp4_srwd,
+		.unlock		= spi_disable_blockprotect_bp4_srwd,
+		.write		= spi_chip_write_256,
+		.read		= spi_chip_read,
+		.voltage	= {2700, 3600},
+		.prepare_access	= spi_prepare_io,
+		.finish_access	= spi_finish_io,
+	},
+
+	{
+		.vendor		= "XTX Technology",
+		.name		= "XT25F64B",
+		.bustype	= BUS_SPI,
+		.manufacture_id	= XTX_ID,
+		.model_id	= XTX_XT25F64B,
+		.total_size	= 8192,
+		.page_size	= 256,
+		.feature_bits	= FEATURE_WRSR_WREN | FEATURE_WRSR_EXT2 |
+				  FEATURE_OTP | FEATURE_QPI_SRP,
+		.dummy_cycles	= { .qpi_read_params = { 4, 4, 6, 8 } },
+		.tested		= TEST_UNTESTED,
+		.probe		= probe_spi_rdid,
+		.probe_timing	= TIMING_ZERO,
+		.block_erasers	=
+		{
+			{
+				.eraseblocks = { {4 * 1024, 2048} },
+				.block_erase = spi_block_erase_20,
+			}, {
+				.eraseblocks = { {32 * 1024, 256} },
+				.block_erase = spi_block_erase_52,
+			}, {
+				.eraseblocks = { {64 * 1024, 128} },
+				.block_erase = spi_block_erase_d8,
+			}, {
+				.eraseblocks = { {8192 * 1024, 1} },
+				.block_erase = spi_block_erase_60,
+			}, {
+				.eraseblocks = { {8192 * 1024, 1} },
+				.block_erase = spi_block_erase_c7,
+			},
+		},
+		.reg_bits	=
+		{
+			.qe	= {STATUS2, 1, RW},
+			.srp    = {STATUS1, 7, RW},
+			.srl    = {STATUS2, 0, RW},
+			.bp     = {{STATUS1, 2, RW}, {STATUS1, 3, RW}, {STATUS1, 4, RW}},
+			.tb     = {STATUS1, 5, RW}, /* Called BP3 in datasheet, acts like TB */
+			.sec    = {STATUS1, 6, RW}, /* Called BP4 in datasheet, acts like SEC */
+			.cmp    = {STATUS2, 6, RW},
+		},
+		.wp_write_cfg	= spi_wp_write_cfg,
+		.wp_read_cfg	= spi_wp_read_cfg,
+		.wp_get_ranges	= spi_wp_get_available_ranges,
+		.decode_range	= decode_range_spi25,
+		.printlock	= spi_prettyprint_status_register_bp4_srwd,
+		.unlock		= spi_disable_blockprotect_bp4_srwd,
+		.write		= spi_chip_write_256,
+		.read		= spi_chip_read,
+		.voltage	= {2700, 3600},
+		.prepare_access	= spi_prepare_io,
+		.finish_access	= spi_finish_io,
+	},
+
+	{
+		.vendor		= "XTX Technology",
+		.name		= "XT25F128B",
+		.bustype	= BUS_SPI,
+		.manufacture_id	= XTX_ID,
+		.model_id	= XTX_XT25F128B,
+		.total_size	= 16384,
+		.page_size	= 256,
+		.feature_bits	= FEATURE_WRSR_WREN | FEATURE_WRSR_EXT2 |
+				  FEATURE_OTP | FEATURE_QPI_SRP,
+		.dummy_cycles	= { .qpi_read_params = { 4, 4, 6, 8 } },
+		.tested		= TEST_UNTESTED,
+		.probe		= probe_spi_rdid,
+		.probe_timing	= TIMING_ZERO,
+		.block_erasers	=
+		{
+			{
+				.eraseblocks = { {4 * 1024, 4096} },
+				.block_erase = spi_block_erase_20,
+			}, {
+				.eraseblocks = { {32 * 1024, 512} },
+				.block_erase = spi_block_erase_52,
+			}, {
+				.eraseblocks = { {64 * 1024, 256} },
+				.block_erase = spi_block_erase_d8,
+			}, {
+				.eraseblocks = { {16384 * 1024, 1} },
+				.block_erase = spi_block_erase_60,
+			}, {
+				.eraseblocks = { {16384 * 1024, 1} },
+				.block_erase = spi_block_erase_c7,
+			},
+		},
+		.reg_bits	=
+		{
+			.qe	= {STATUS2, 1, RW},
+			.srp    = {STATUS1, 7, RW},
+			.srl    = {STATUS2, 0, RW},
+			.bp     = {{STATUS1, 2, RW}, {STATUS1, 3, RW}, {STATUS1, 4, RW}},
+			.tb     = {STATUS1, 5, RW}, /* Called BP3 in datasheet, acts like TB */
+			.sec    = {STATUS1, 6, RW}, /* Called BP4 in datasheet, acts like SEC */
+			.cmp    = {STATUS2, 6, RW},
+			.wps	= {STATUS2, 4, RW},
+		},
+		.wp_write_cfg	= spi_wp_write_cfg,
+		.wp_read_cfg	= spi_wp_read_cfg,
+		.wp_get_ranges	= spi_wp_get_available_ranges,
+		.decode_range	= decode_range_spi25,
+		.printlock	= spi_prettyprint_status_register_bp4_srwd,
+		.unlock		= spi_disable_blockprotect_bp4_srwd,
+		.write		= spi_chip_write_256,
+		.read		= spi_chip_read,
+		.voltage	= {2700, 3600},
+		.prepare_access	= spi_prepare_io,
+		.finish_access	= spi_finish_io,
+	},
+
+	{
 		.vendor		= "Zetta Device",
 		.name		= "ZD25D20",
 		.bustype	= BUS_SPI,
diff --git a/include/flashchips.h b/include/flashchips.h
index 9f498cd..ce3d83e 100644
--- a/include/flashchips.h
+++ b/include/flashchips.h
@@ -1035,6 +1035,10 @@
 #define XTX_XT25F02E		0x4012
 #define XTX_XT25F04D		0x4013
 #define XTX_XT25F08B		0x4014
+#define XTX_XT25F16B		0x4015	/* Same as XT25F16F */
+#define XTX_XT25F32B		0x4016	/* Same as XT25F32F */
+#define XTX_XT25F64B		0x4017	/* Same as XT25F64F */
+#define XTX_XT25F128B		0x4018	/* Same as XT25F128F/XTBF128F */
 
 #define ZETTADEVICE_ID          0xBA	/* Zetta Device */
 #define ZETTADEVICE_ZD25D20     0x2012