spi_master: Use new API to register shutdown function
This allows spi masters to register shutdown function in spi_master
struct, which means there is no need to call register_shutdown in init
function, since this call is now a part of register_spi_master.
As a consequence of using new API, two things are happening here:
1) No resource leakage anymore in case register_shutdown() would fail,
2) Fixed propagation of register_spi_master() return values.
Basic testing: when I comment out free(data) in linux_spi_shutdown, test
fails with error
../linux_spi.c:235: note: block 0x55a4db276510 allocated here
ERROR: linux_spi_init_and_shutdown_test_success leaked 1 block(s)
Means, shutdown function is invoked.
Tested: 1) builds and ninja test including CB:56911
2) On ARMv7 device
flashrom -p linux_spi -V
-> using linux_spi, chip found
3) On x86_64 AMD device
flashrom -p internal -V
-> this is actually using sb600spi, chip found
flashrom-stable: Updated `dirtyjtag_spi` which was added earlier.
Change-Id: Ib60300f9ddb295a255d5ef3f8da0e07064207140
Signed-off-by: Anastasia Klimchuk <aklm@chromium.org>
Original-Reviewed-on: https://review.coreboot.org/c/flashrom/+/56103
Original-Reviewed-by: Nico Huber <nico.h@gmx.de>
Original-Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Original-Reviewed-by: Edward O'Callaghan <quasisec@chromium.org>
Reviewed-on: https://review.coreboot.org/c/flashrom-stable/+/72231
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
diff --git a/ft2232_spi.c b/ft2232_spi.c
index b37a60e..78dbb69 100644
--- a/ft2232_spi.c
+++ b/ft2232_spi.c
@@ -298,6 +298,7 @@
.read = default_spi_read,
.write_256 = default_spi_write_256,
.write_aai = default_spi_write_aai,
+ .shutdown = ft2232_shutdown,
};
/* Returns 0 upon success, a negative number upon errors. */
@@ -696,13 +697,7 @@
spi_data->aux_bits = aux_bits;
spi_data->pindir = pindir;
- if (register_shutdown(ft2232_shutdown, spi_data)) {
- ret = -9;
- goto ftdi_err;
- }
- register_spi_master(&spi_master_ft2232, spi_data);
-
- return 0;
+ return register_spi_master(&spi_master_ft2232, spi_data);
ftdi_err:
if ((f = ftdi_usb_close(ftdic)) < 0) {