Add a bunch of new/tested stuff and various small changes 20
Tested mainboards:
OK:
- abit BX6 2.0
Reported by Stefan Tauner
- Acer EM61SM/EM61PM (used in Acer Aspire T180)
Reported by Benjamin Bellec
- ADLINK Express-HR
Reported by Obermair Thomas
- ASUS M3N-H/HDMI
Reported by Franc Serres
- Attro G5G100-P
Reported by Christoph Grenz
- ASRock 960GM-GS3 FX
Reported by Fuley Istvan
- Elitegroup P6BAP-A+ (V2.2)
Reported by Arnaldo Pirrone
- Elitegroup GeForce7050M-M (V2.0)
Reported by Leif Middelschulte
- Fujitsu D3041-A1 (used in ESPRIMO P2560)
Reported by Daggi Duck
- GIGABYTE GA-8S648
Reported by TeslaBIOS
- GIGABYTE GA-970A-D3P (rev. 1.0)
Reported by Jean-Francois Pirus
- GIGABYTE GA-B85M-D3H
Reported by Mladen Milinković
- GIGABYTE GA-X79-UD3
Reported by Jeff O'Neil
- GIGABYTE GA-X79-UP4 (rev. 1.0)
Reported by George Spelvin
- GIGABYTE GA-Z68MA-D2H-B3 (rev. 1.3)
Reported by Vangelis Skarmoutsos
- GIGABYTE GA-Z87-HD3
Reported by virii5
- Lenovo Tilapia CRB
Reported by jenkins56 on IRC
- MSI GT60-2OD (notebook, only with layout patches)
Reported by Vasiliy Vylegzhanin
- MSI MS-6704 (845PE Max2 PCB 1.0) (Pure Version w/o raid)
Reported by professorll
- MSI MS-7399 1.1 (used in Acer Aspire M5640/M3640)
Reported by Koen Rousseau
- MSI MS-7125 (K8N Neo4(-F/FI/FX))
We had a board enable for that one for years, but it was not (and still is not)
completely clear which boards are covered.
- MSI MS-7522 (MSI X58 Pro-E)
Reported by Gianluigi Tiesi
- PCWARE APM80-D3
Reported by César Augusto Jakoby
- Pegatron IPP7A-CP
Reported by Илья Шипко
- Supermicro H8QME-2
Reported by Greg Tippitt
- Supermicro X7SPA-H
Reported by Kyle Bentley
- Supermicro X7SPE-HF-D525
Reported by Micah Anderson
- Supermicro X8DTE
Reported by Mark Nipper
- Supermicro X8SIL-F
Reported by Peter Samuelson
- ZOTAC IONITX-A (-E) version
Reported by Maciej Wroniecki
NOT OK:
- Supermicro X10SLM-F
Reported by Micah Anderson
Flash chips:
- Atmel AT29C020 to PREW (+PREW)
It was marked like that in the past, but I could not find the reason why the
test bits were reset. Urja Rannikko tested it again and it still works.
- Eon EN25F10 to PREW (+PREW)
Reported by Stolmár Tamás
- Eon EN25QH64 to PR (+PR)
Reported by Vladimir 'φ-coder' Serbinenko
- GigaDevice GD25Q32(B) to PREW (+PREW)
Reported by mrnuke
- Macronix MX25L512(E)/MX25V512(C) to PREW (+PREW)
Reported by Jamie Nichol
- Macronix MX25L2005(C) to PREW (+PREW)
Reported by Давыдов Дмитрий
- Micron/Numonyx/ST N25Q064..1E to PREW (+PREW)
Reported by Paolo Zambotti
- Pmc Pm25LD010(C) to PREW (+PREW)
Reported by Vasile Ceteras
- Micron/Numonyx/ST M25P16 to PREW (+EW)
Reported by raven
- Micron/Numonyx/ST M25PX64 to PREW (+W)
Reported by Zaolin
- SST SST25VF020B to PREW (+PREW)
Reported by Michaël Zweers
- SST SST49LF040 to PREW (+W)
Reported by Oskar Enoksson
- Add support for MX25L3273E (evil twin of MX25L3205 et al.)
Also, add MX25L1673 and MX25L6473E to the names of their twins and
add a note about MX25L8073E.
- Winbond W25X32 to PREW (+REW)
Reported by The Raven
- Winbond W29C010 etc. to PREW (+W)
Reported by san
Chipsets tested OK:
- Intel NM70 (8086:1e5f)
Reported by mrnuke
- Intel C204 (8086:1c54)
Reported by Vasiliy Vylegzhanin
- Intel QM67 (8086:1c4f)
Reported by Obermair Thomas
- Intel HM77 (8086:1e57)
Reported by Vasiliy Vylegzhanin
- Intel B85 (8086:8c50)
Reported by Mladen Milinković
- Intel HM87 (8086:8c4b)
Reported by Vasiliy Vylegzhanin
- Intel Z87 (8086:8c44)
Reported by virii5
- NVIDIA MCP51 (10de:0261)
Reported by Marcin Kościelnicki
- SiS 648 (1039:0648)
Reported by TeslaBIOS
Miscellaneous:
- Mark ARM-USB-TINY-H as tested in ft2232_spi (reported by _nanodev_).
- getrevision.sh: Ignore failing date calls.
- getrevision.sh: Fix -u and -l for older git versions which require = for the
git log grep parameter.
- Corrected K8T Neo2-F entries due to a report from Stelios Tsampas.
- Add "-p internal" to output that requests users to send flashrom -V logs.
- Add Macbook2,1, Thinkpad X230, EasyNote LM85 to laptop whitelist.
- Tiny other stuff.
Corresponding to flashrom svn r1783.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
diff --git a/util/getrevision.sh b/util/getrevision.sh
index 709e45f..e50db75 100755
--- a/util/getrevision.sh
+++ b/util/getrevision.sh
@@ -173,7 +173,7 @@
elif git_is_file_tracked "$1" ; then
r=$(git_last_commit "$1")
- local svn_base=$(git log --grep git-svn-id -1 --format='%h')
+ local svn_base=$(git log --grep=git-svn-id -1 --format='%h')
if [ "$svn_base" != "" ] ; then
local diff_to_svn=$(git rev-list --count ${svn_base}..${r})
if [ "$diff_to_svn" -gt 0 ] ; then
@@ -204,7 +204,7 @@
# If this is a "native" git-svn clone we could use git svn log:
# git svn log --oneline -1 | sed 's/^r//;s/[[:blank:]].*//' or even git svn find-rev
# but it is easier to just grep for the git-svn-id unconditionally
- r=$(git log --grep git-svn-id -1 -- "$1" | \
+ r=$(git log --grep=git-svn-id -1 -- "$1" | \
grep git-svn-id | \
sed 's/.*@/r/;s/[[:blank:]].*//')
fi
@@ -247,7 +247,7 @@
local query_path=
local action=
- # The is the main loop
+ # Argument parser loop
while [ $# -gt 0 ];
do
case ${1} in
@@ -286,7 +286,7 @@
fi
query_path=$1
else
- echo "Warning: Ignoring over-abundant paramter: \"${1}\"">&2
+ echo "Warning: Ignoring overabundant parameter: \"${1}\"">&2
fi
shift;;
esac;