Add support for more than one Super I/O or EC per machine
Flashrom currently only supports exactly one Super I/O or Embedded
Controller, and this means quite a few notebooks and a small subset of
desktop/server boards cannot be handled reliably and easily.
Allow detection and initialization of up to 3 Super I/O and/or EC chips.
WARNING! If a Super I/O or EC responds on multiple ports (0x2e and
0x4e), the code will do the wrong thing (namely, initialize the hardware
twice). I have no idea if we should handle such situations, and whether
we should ignore the second chip with identical ID or not. Initializing
the hardware twice for the IT87* family is _not_ a problem, but I don't
know how well IT85* can handle it (and whether IT85* would listen at
more than one port anyway).
Corresponding to flashrom svn r1289.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Thanks to Thomas Schneider for testing on a board with ITE IT87* SPI.
Test report (success) is here: http://paste.flashrom.org/view.php?id=379
Thanks to David Hendricks for testing on a Google Cr-48 laptop with
ITE IT85* EC SPI. Test report (success) is here:
http://www.flashrom.org/pipermail/flashrom/2011-April/006275.html
Acked-by: David Hendricks <dhendrix@google.com>
diff --git a/it85spi.c b/it85spi.c
index d122a18..1710d8e 100644
--- a/it85spi.c
+++ b/it85spi.c
@@ -47,9 +47,6 @@
/* Constants for Logical Device registers */
#define LDNSEL 0x07
-#define CHIP_ID_BYTE1_REG 0x20
-#define CHIP_ID_BYTE2_REG 0x21
-#define CHIP_CHIP_VER_REG 0x22
/* These are standard Super I/O 16-bit base address registers */
#define SHM_IO_BAR0 0x60 /* big-endian, this is high bits */
@@ -86,44 +83,6 @@
unsigned char *ce_high, *ce_low;
static int it85xx_scratch_rom_reenter = 0;
-uint16_t probe_id_ite85(uint16_t port)
-{
- uint16_t id;
-
- id = sio_read(port, CHIP_ID_BYTE1_REG) << 8 |
- sio_read(port, CHIP_ID_BYTE2_REG);
-
- return id;
-}
-
-struct superio probe_superio_ite85xx(void)
-{
- struct superio ret = {};
- uint16_t ite_ports[] = {ITE_SUPERIO_PORT1, ITE_SUPERIO_PORT2, 0};
- uint16_t *i = ite_ports;
-
- ret.vendor = SUPERIO_VENDOR_ITE;
- for (; *i; i++) {
- ret.port = *i;
- ret.model = probe_id_ite85(ret.port);
- switch (ret.model >> 8) {
- case 0x85:
- msg_pdbg("Found EC: ITE85xx (Vendor:0x%02x,ID:0x%02x,"
- "Rev:0x%02x) on sio_port:0x%x.\n",
- ret.model >> 8, ret.model & 0xff,
- sio_read(ret.port, CHIP_CHIP_VER_REG),
- ret.port);
- return ret;
- }
- }
-
- /* No good ID found. */
- ret.vendor = SUPERIO_VENDOR_NONE;
- ret.port = 0;
- ret.model = 0;
- return ret;
-}
-
/* This function will poll the keyboard status register until either
* an expected value shows up, or
* timeout reaches.
@@ -267,20 +226,18 @@
#endif
}
-int it85xx_spi_common_init(void)
+static int it85xx_spi_common_init(struct superio s)
{
chipaddr base;
msg_pdbg("%s():%d superio.vendor=0x%02x\n", __func__, __LINE__,
- superio.vendor);
- if (superio.vendor != SUPERIO_VENDOR_ITE)
- return 1;
+ s.vendor);
#ifdef LPC_IO
/* Get LPCPNP of SHM. That's big-endian */
- sio_write(superio.port, LDNSEL, 0x0F); /* Set LDN to SHM (0x0F) */
- shm_io_base = (sio_read(superio.port, SHM_IO_BAR0) << 8) +
- sio_read(superio.port, SHM_IO_BAR1);
+ sio_write(s.port, LDNSEL, 0x0F); /* Set LDN to SHM (0x0F) */
+ shm_io_base = (sio_read(s.port, SHM_IO_BAR0) << 8) +
+ sio_read(s.port, SHM_IO_BAR1);
msg_pdbg("%s():%d shm_io_base=0x%04x\n", __func__, __LINE__,
shm_io_base);
@@ -311,25 +268,7 @@
return 0;
}
-/* Called by programmer_entry .init */
-int it85xx_spi_init(void)
-{
- int ret;
-
- get_io_perms();
- /* Probe for the Super I/O chip and fill global struct superio. */
- probe_superio();
- ret = it85xx_spi_common_init();
- if (!ret) {
- buses_supported = CHIP_BUSTYPE_SPI;
- } else {
- buses_supported = CHIP_BUSTYPE_NONE;
- }
- return ret;
-}
-
-/* Called by internal_init() */
-int it85xx_probe_spi_flash(void)
+int it85xx_spi_init(struct superio s)
{
int ret;
@@ -337,13 +276,14 @@
msg_pdbg("%s():%d buses not support FWH\n", __func__, __LINE__);
return 1;
}
- ret = it85xx_spi_common_init();
+ ret = it85xx_spi_common_init(s);
msg_pdbg("FWH: %s():%d ret=%d\n", __func__, __LINE__, ret);
if (!ret) {
msg_pdbg("%s():%d buses_supported=0x%x\n", __func__, __LINE__,
buses_supported);
if (buses_supported & CHIP_BUSTYPE_FWH)
msg_pdbg("Overriding chipset SPI with IT85 FWH|SPI.\n");
+ /* Really leave FWH enabled? */
buses_supported |= CHIP_BUSTYPE_FWH | CHIP_BUSTYPE_SPI;
}
return ret;