Move all IT87xx specific SPI routines from spi.c to a separate file it87spi.c
No behavioural changes, but greatly improved SPI abstraction.
Corresponding to flashrom svn r229 and coreboot v2 svn r3305.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Peter Stuge <peter@stuge.se>
diff --git a/it87spi.c b/it87spi.c
new file mode 100644
index 0000000..1fd3309
--- /dev/null
+++ b/it87spi.c
@@ -0,0 +1,257 @@
+/*
+ * This file is part of the flashrom project.
+ *
+ * Copyright (C) 2007, 2008 Carl-Daniel Hailfinger
+ * Copyright (C) 2008 Ronald Hoogenboom <ronald@zonnet.nl>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+/*
+ * Contains the ITE IT87* SPI specific routines
+ */
+
+#include <stdio.h>
+#include <pci/pci.h>
+#include <stdint.h>
+#include <string.h>
+#include "flash.h"
+#include "spi.h"
+
+#define ITE_SUPERIO_PORT1 0x2e
+#define ITE_SUPERIO_PORT2 0x4e
+
+
+uint16_t it8716f_flashport = 0;
+/* use fast 33MHz SPI (<>0) or slow 16MHz (0) */
+int fast_spi = 1;
+
+/* Generic Super I/O helper functions */
+uint8_t regval(uint16_t port, uint8_t reg)
+{
+ outb(reg, port);
+ return inb(port + 1);
+}
+
+void regwrite(uint16_t port, uint8_t reg, uint8_t val)
+{
+ outb(reg, port);
+ outb(val, port + 1);
+}
+
+/* Helper functions for most recent ITE IT87xx Super I/O chips */
+#define CHIP_ID_BYTE1_REG 0x20
+#define CHIP_ID_BYTE2_REG 0x21
+static void enter_conf_mode_ite(uint16_t port)
+{
+ outb(0x87, port);
+ outb(0x01, port);
+ outb(0x55, port);
+ if (port == ITE_SUPERIO_PORT1)
+ outb(0x55, port);
+ else
+ outb(0xaa, port);
+}
+
+static void exit_conf_mode_ite(uint16_t port)
+{
+ regwrite(port, 0x02, 0x02);
+}
+
+static uint16_t find_ite_spi_flash_port(uint16_t port)
+{
+ uint8_t tmp = 0;
+ uint16_t id, flashport = 0;
+
+ enter_conf_mode_ite(port);
+
+ id = regval(port, CHIP_ID_BYTE1_REG) << 8;
+ id |= regval(port, CHIP_ID_BYTE2_REG);
+
+ /* TODO: Handle more IT87xx if they support flash translation */
+ if (id == 0x8716) {
+ /* NOLDN, reg 0x24, mask out lowest bit (suspend) */
+ tmp = regval(port, 0x24) & 0xFE;
+ printf("Serial flash segment 0x%08x-0x%08x %sabled\n",
+ 0xFFFE0000, 0xFFFFFFFF, (tmp & 1 << 1) ? "en" : "dis");
+ printf("Serial flash segment 0x%08x-0x%08x %sabled\n",
+ 0x000E0000, 0x000FFFFF, (tmp & 1 << 1) ? "en" : "dis");
+ printf("Serial flash segment 0x%08x-0x%08x %sabled\n",
+ 0xFFEE0000, 0xFFEFFFFF, (tmp & 1 << 2) ? "en" : "dis");
+ printf("Serial flash segment 0x%08x-0x%08x %sabled\n",
+ 0xFFF80000, 0xFFFEFFFF, (tmp & 1 << 3) ? "en" : "dis");
+ printf("LPC write to serial flash %sabled\n",
+ (tmp & 1 << 4) ? "en" : "dis");
+ printf("serial flash pin %i\n", (tmp & 1 << 5) ? 87 : 29);
+ /* LDN 0x7, reg 0x64/0x65 */
+ regwrite(port, 0x07, 0x7);
+ flashport = regval(port, 0x64) << 8;
+ flashport |= regval(port, 0x65);
+ }
+ exit_conf_mode_ite(port);
+ return flashport;
+}
+
+int it87xx_probe_spi_flash(const char *name)
+{
+ it8716f_flashport = find_ite_spi_flash_port(ITE_SUPERIO_PORT1);
+ if (!it8716f_flashport)
+ it8716f_flashport = find_ite_spi_flash_port(ITE_SUPERIO_PORT2);
+ return (!it8716f_flashport);
+}
+
+/* The IT8716F only supports commands with length 1,2,4,5 bytes including
+ command byte and can not read more than 3 bytes from the device.
+ This function expects writearr[0] to be the first byte sent to the device,
+ whereas the IT8716F splits commands internally into address and non-address
+ commands with the address in inverse wire order. That's why the register
+ ordering in case 4 and 5 may seem strange. */
+int it8716f_spi_command(unsigned int writecnt, unsigned int readcnt, const unsigned char *writearr, unsigned char *readarr)
+{
+ uint8_t busy, writeenc;
+ int i;
+
+ do {
+ busy = inb(it8716f_flashport) & 0x80;
+ } while (busy);
+ if (readcnt > 3) {
+ printf("%s called with unsupported readcnt %i.\n",
+ __FUNCTION__, readcnt);
+ return 1;
+ }
+ switch (writecnt) {
+ case 1:
+ outb(writearr[0], it8716f_flashport + 1);
+ writeenc = 0x0;
+ break;
+ case 2:
+ outb(writearr[0], it8716f_flashport + 1);
+ outb(writearr[1], it8716f_flashport + 7);
+ writeenc = 0x1;
+ break;
+ case 4:
+ outb(writearr[0], it8716f_flashport + 1);
+ outb(writearr[1], it8716f_flashport + 4);
+ outb(writearr[2], it8716f_flashport + 3);
+ outb(writearr[3], it8716f_flashport + 2);
+ writeenc = 0x2;
+ break;
+ case 5:
+ outb(writearr[0], it8716f_flashport + 1);
+ outb(writearr[1], it8716f_flashport + 4);
+ outb(writearr[2], it8716f_flashport + 3);
+ outb(writearr[3], it8716f_flashport + 2);
+ outb(writearr[4], it8716f_flashport + 7);
+ writeenc = 0x3;
+ break;
+ default:
+ printf("%s called with unsupported writecnt %i.\n",
+ __FUNCTION__, writecnt);
+ return 1;
+ }
+ /* Start IO, 33 or 16 MHz, readcnt input bytes, writecnt output bytes.
+ * Note:
+ * We can't use writecnt directly, but have to use a strange encoding.
+ */
+ outb(((0x4 + (fast_spi ? 1 : 0)) << 4) | ((readcnt & 0x3) << 2) | (writeenc), it8716f_flashport);
+
+ if (readcnt > 0) {
+ do {
+ busy = inb(it8716f_flashport) & 0x80;
+ } while (busy);
+
+ for (i = 0; i < readcnt; i++) {
+ readarr[i] = inb(it8716f_flashport + 5 + i);
+ }
+ }
+
+ return 0;
+}
+
+/* Page size is usually 256 bytes */
+void it8716f_spi_page_program(int block, uint8_t *buf, uint8_t *bios) {
+ int i;
+
+ spi_write_enable();
+ outb(0x06 , it8716f_flashport + 1);
+ outb(((2 + (fast_spi ? 1 : 0)) << 4), it8716f_flashport);
+ for (i = 0; i < 256; i++) {
+ bios[256 * block + i] = buf[256 * block + i];
+ }
+ outb(0, it8716f_flashport);
+ /* Wait until the Write-In-Progress bit is cleared.
+ * This usually takes 1-10 ms, so wait in 1 ms steps.
+ */
+ while (spi_read_status_register() & JEDEC_RDSR_BIT_WIP)
+ usleep(1000);
+}
+
+/*
+ * IT8716F only allows maximum of 512 kb SPI mapped to LPC memory cycles
+ * Program chip using firmware cycle byte programming. (SLOW!)
+ */
+int it8716f_over512k_spi_chip_write(struct flashchip *flash, uint8_t *buf)
+{
+ int total_size = 1024 * flash->total_size;
+ int i;
+ fast_spi = 0;
+
+ spi_disable_blockprotect();
+ for (i = 0; i < total_size; i++) {
+ spi_write_enable();
+ spi_byte_program(i, buf[i]);
+ while (spi_read_status_register() & JEDEC_RDSR_BIT_WIP)
+ myusec_delay(10);
+ }
+ /* resume normal ops... */
+ outb(0x20, it8716f_flashport);
+ return 0;
+}
+
+/*
+ * IT8716F only allows maximum of 512 kb SPI mapped to LPC memory cycles
+ * Need to read this big flash using firmware cycles 3 byte at a time.
+ */
+int it8716f_spi_chip_read(struct flashchip *flash, uint8_t *buf)
+{
+ int total_size = 1024 * flash->total_size;
+ int i;
+ fast_spi = 0;
+
+ if (total_size > 512 * 1024) {
+ for (i = 0; i < total_size; i += 3) {
+ int toread = 3;
+ if (total_size - i < toread)
+ toread = total_size - i;
+ spi_nbyte_read(i, buf + i, toread);
+ }
+ } else {
+ memcpy(buf, (const char *)flash->virtual_memory, total_size);
+ }
+ return 0;
+}
+
+int it8716f_spi_chip_write(struct flashchip *flash, uint8_t *buf) {
+ int total_size = 1024 * flash->total_size;
+ int i;
+ if (total_size > 512 * 1024) {
+ it8716f_over512k_spi_chip_write(flash, buf);
+ } else {
+ for (i = 0; i < total_size / 256; i++) {
+ spi_page_program(i, buf, (uint8_t *)flash->virtual_memory);
+ }
+ }
+ return 0;
+}
+