)]}'
{
  "commit": "becda742dc49fb2a2d3e5747f326d56b756852ae",
  "tree": "2131a17a6a505dc863916f12b2572cd88c86d9b4",
  "parents": [
    "0ab1e5d5e3d37aa97eb4ae36caac06a800c86654"
  ],
  "author": {
    "name": "Stefan Tauner",
    "email": "stefan.tauner@alumni.tuwien.ac.at",
    "time": "Fri May 30 19:34:00 2014 +0000"
  },
  "committer": {
    "name": "Stefan Tauner",
    "email": "stefan.tauner@alumni.tuwien.ac.at",
    "time": "Fri May 30 19:34:00 2014 +0000"
  },
  "message": "Fix PMC Pm25LV512 and Pm25LV010 probing\n\nApparently PMC did not understand the purpose of the JEDEC\ncontinuation code. These chips reply to RES (the only supported ID\ncommand) with the prefix-less vendor ID, a device ID, eventually\nfollowed by the continuation byte for the vendor ID.\n\nThis fix uses only the first two bytes instead of appending the\ncontinuation code to the device ID. The problem was reported by The\nRaven who also tested the fix on a Pm25LV010 (with an imprint of\n\"Pm25LV010E\").\n\nCorresponding to flashrom svn r1806.\n\nSigned-off-by: Stefan Tauner \u003cstefan.tauner@alumni.tuwien.ac.at\u003e\nAcked-by: Stefan Tauner \u003cstefan.tauner@alumni.tuwien.ac.at\u003e\n",
  "tree_diff": [
    {
      "type": "modify",
      "old_id": "78c18ca365708050ee6861a97ae11419f802215e",
      "old_mode": 33188,
      "old_path": "flashchips.c",
      "new_id": "c8304360fe55ed44d4b123c7dd738a6192eb2a64",
      "new_mode": 33188,
      "new_path": "flashchips.c"
    },
    {
      "type": "modify",
      "old_id": "383dc13976fcd0af2123b06f88c25d3a8026a0dd",
      "old_mode": 33188,
      "old_path": "flashchips.h",
      "new_id": "5fce532ffc4cffadebb344a81245e1b84ee38bc6",
      "new_mode": 33188,
      "new_path": "flashchips.h"
    }
  ]
}