Kill central list of SPI programmers
Remove the array spi_programmer, replace it by dynamic registration
instead. Also initially start with no busses supported, and switch to
the default non-SPI only for the internal programmer.
Also this patch changes the initialization for the buses_supported variable
from "everything-except-SPI" to "nothing". All programmers have to set the
bus type on their own, and this enables register_spi_programmer to just add
the SPI both for on-board SPI interfaces (where the internal programmer
already detected the other bus types), as well as for external programmers
(where we have the default "none").
Corresponding to flashrom svn r1299.
Signed-off-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
diff --git a/it87spi.c b/it87spi.c
index 2b09d64..54f41fa 100644
--- a/it87spi.c
+++ b/it87spi.c
@@ -104,6 +104,21 @@
return;
}
+static int it8716f_spi_send_command(unsigned int writecnt, unsigned int readcnt,
+ const unsigned char *writearr, unsigned char *readarr);
+static int it8716f_spi_chip_read(struct flashchip *flash, uint8_t *buf, int start, int len);
+static int it8716f_spi_chip_write_256(struct flashchip *flash, uint8_t *buf, int start, int len);
+
+static const struct spi_programmer spi_programmer_it87xx = {
+ .type = SPI_CONTROLLER_IT87XX,
+ .max_data_read = MAX_DATA_UNSPECIFIED,
+ .max_data_write = MAX_DATA_UNSPECIFIED,
+ .command = it8716f_spi_send_command,
+ .multicommand = default_spi_send_multicommand,
+ .read = it8716f_spi_chip_read,
+ .write_256 = it8716f_spi_chip_write_256,
+};
+
static uint16_t it87spi_probe(uint16_t port)
{
uint8_t tmp = 0;
@@ -180,9 +195,8 @@
it8716f_flashport = flashport;
if (buses_supported & CHIP_BUSTYPE_SPI)
msg_pdbg("Overriding chipset SPI with IT87 SPI.\n");
- spi_controller = SPI_CONTROLLER_IT87XX;
/* FIXME: Add the SPI bus or replace the other buses with it? */
- buses_supported |= CHIP_BUSTYPE_SPI;
+ register_spi_programmer(&spi_programmer_it87xx);
return 0;
}
@@ -234,7 +248,7 @@
* commands with the address in inverse wire order. That's why the register
* ordering in case 4 and 5 may seem strange.
*/
-int it8716f_spi_send_command(unsigned int writecnt, unsigned int readcnt,
+static int it8716f_spi_send_command(unsigned int writecnt, unsigned int readcnt,
const unsigned char *writearr, unsigned char *readarr)
{
uint8_t busy, writeenc;
@@ -327,7 +341,7 @@
* IT8716F only allows maximum of 512 kb SPI mapped to LPC memory cycles
* Need to read this big flash using firmware cycles 3 byte at a time.
*/
-int it8716f_spi_chip_read(struct flashchip *flash, uint8_t *buf, int start, int len)
+static int it8716f_spi_chip_read(struct flashchip *flash, uint8_t *buf, int start, int len)
{
fast_spi = 0;
@@ -344,7 +358,7 @@
return 0;
}
-int it8716f_spi_chip_write_256(struct flashchip *flash, uint8_t *buf, int start, int len)
+static int it8716f_spi_chip_write_256(struct flashchip *flash, uint8_t *buf, int start, int len)
{
/*
* IT8716F only allows maximum of 512 kb SPI chip size for memory