Kill central list of SPI programmers
Remove the array spi_programmer, replace it by dynamic registration
instead. Also initially start with no busses supported, and switch to
the default non-SPI only for the internal programmer.
Also this patch changes the initialization for the buses_supported variable
from "everything-except-SPI" to "nothing". All programmers have to set the
bus type on their own, and this enables register_spi_programmer to just add
the SPI both for on-board SPI interfaces (where the internal programmer
already detected the other bus types), as well as for external programmers
(where we have the default "none").
Corresponding to flashrom svn r1299.
Signed-off-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
diff --git a/ft2232_spi.c b/ft2232_spi.c
index 7ff1d81..f37a698 100644
--- a/ft2232_spi.c
+++ b/ft2232_spi.c
@@ -128,6 +128,19 @@
return 0;
}
+static int ft2232_spi_send_command(unsigned int writecnt, unsigned int readcnt,
+ const unsigned char *writearr, unsigned char *readarr);
+
+static const struct spi_programmer spi_programmer_ft2232 = {
+ .type = SPI_CONTROLLER_FT2232,
+ .max_data_read = 64 * 1024,
+ .max_data_write = 256,
+ .command = ft2232_spi_send_command,
+ .multicommand = default_spi_send_multicommand,
+ .read = default_spi_read,
+ .write_256 = default_spi_write_256,
+};
+
int ft2232_spi_init(void)
{
int f;
@@ -261,13 +274,12 @@
// msg_pdbg("\nft2232 chosen\n");
- buses_supported = CHIP_BUSTYPE_SPI;
- spi_controller = SPI_CONTROLLER_FT2232;
+ register_spi_programmer(&spi_programmer_ft2232);
return 0;
}
-int ft2232_spi_send_command(unsigned int writecnt, unsigned int readcnt,
+static int ft2232_spi_send_command(unsigned int writecnt, unsigned int readcnt,
const unsigned char *writearr, unsigned char *readarr)
{
struct ftdi_context *ftdic = &ftdic_context;