dediprog.c: Refactor singleton states into reentrant pattern
Move global singleton states into a struct and store within
the spi_master data field for the life-time of the driver.
This is one of the steps on the way to move spi_master data
memory management behind the initialisation API, for more
context see other patches under the same topic "register_master_api".
Tested: builds and ninja test
flashrom-stable: backported to old master API
Change-Id: I72085e750af97b94dfa94f2ebf2a134e41a2ec8d
Signed-off-by: Anastasia Klimchuk <aklm@chromium.org>
Original-Reviewed-on: https://review.coreboot.org/c/flashrom/+/56414
Original-Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/flashrom-stable/+/71422
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
diff --git a/dediprog.c b/dediprog.c
index 0dadf37..2ce06c6 100644
--- a/dediprog.c
+++ b/dediprog.c
@@ -43,10 +43,6 @@
#define REQTYPE_OTHER_IN (LIBUSB_ENDPOINT_IN | LIBUSB_REQUEST_TYPE_VENDOR | LIBUSB_RECIPIENT_OTHER) /* 0xC3 */
#define REQTYPE_EP_OUT (LIBUSB_ENDPOINT_OUT | LIBUSB_REQUEST_TYPE_VENDOR | LIBUSB_RECIPIENT_ENDPOINT) /* 0x42 */
#define REQTYPE_EP_IN (LIBUSB_ENDPOINT_IN | LIBUSB_REQUEST_TYPE_VENDOR | LIBUSB_RECIPIENT_ENDPOINT) /* 0xC2 */
-static struct libusb_context *usb_ctx;
-static libusb_device_handle *dediprog_handle;
-static int dediprog_in_endpoint;
-static int dediprog_out_endpoint;
enum dediprog_devtype {
DEV_UNKNOWN = 0,
@@ -158,8 +154,14 @@
{0},
};
-static int dediprog_firmwareversion = FIRMWARE_VERSION(0, 0, 0);
-static enum dediprog_devtype dediprog_devicetype = DEV_UNKNOWN;
+struct dediprog_data {
+ struct libusb_context *usb_ctx;
+ libusb_device_handle *dediprog_handle;
+ int dediprog_in_endpoint;
+ int dediprog_out_endpoint;
+ int dediprog_firmwareversion;
+ enum dediprog_devtype dediprog_devicetype;
+};
#if defined(LIBUSB_MAJOR) && defined(LIBUSB_MINOR) && defined(LIBUSB_MICRO) && \
LIBUSB_MAJOR <= 1 && LIBUSB_MINOR == 0 && LIBUSB_MICRO < 9
@@ -177,20 +179,20 @@
}
#endif
-static enum protocol protocol(void)
+static enum protocol protocol(const struct dediprog_data *dp_data)
{
/* Firmware version < 5.0.0 is handled explicitly in some cases. */
- switch (dediprog_devicetype) {
+ switch (dp_data->dediprog_devicetype) {
case DEV_SF100:
case DEV_SF200:
- if (dediprog_firmwareversion < FIRMWARE_VERSION(5, 5, 0))
+ if (dp_data->dediprog_firmwareversion < FIRMWARE_VERSION(5, 5, 0))
return PROTOCOL_V1;
else
return PROTOCOL_V2;
case DEV_SF600:
- if (dediprog_firmwareversion < FIRMWARE_VERSION(6, 9, 0))
+ if (dp_data->dediprog_firmwareversion < FIRMWARE_VERSION(6, 9, 0))
return PROTOCOL_V1;
- else if (dediprog_firmwareversion <= FIRMWARE_VERSION(7, 2, 21))
+ else if (dp_data->dediprog_firmwareversion <= FIRMWARE_VERSION(7, 2, 21))
return PROTOCOL_V2;
else
return PROTOCOL_V3;
@@ -215,7 +217,9 @@
++status->finished_idx;
}
-static int dediprog_bulk_read_poll(const struct dediprog_transfer_status *const status, const int finish)
+static int dediprog_bulk_read_poll(struct libusb_context *usb_ctx,
+ const struct dediprog_transfer_status *const status,
+ const int finish)
{
if (status->finished_idx >= status->queued_idx)
return 0;
@@ -231,13 +235,17 @@
return 0;
}
-static int dediprog_read(enum dediprog_cmds cmd, unsigned int value, unsigned int idx, uint8_t *bytes, size_t size)
+static int dediprog_read(libusb_device_handle *dediprog_handle,
+ enum dediprog_cmds cmd, unsigned int value, unsigned int idx,
+ uint8_t *bytes, size_t size)
{
return libusb_control_transfer(dediprog_handle, REQTYPE_EP_IN, cmd, value, idx,
(unsigned char *)bytes, size, DEFAULT_TIMEOUT);
}
-static int dediprog_write(enum dediprog_cmds cmd, unsigned int value, unsigned int idx, const uint8_t *bytes, size_t size)
+static int dediprog_write(libusb_device_handle *dediprog_handle,
+ enum dediprog_cmds cmd, unsigned int value, unsigned int idx,
+ const uint8_t *bytes, size_t size)
{
return libusb_control_transfer(dediprog_handle, REQTYPE_EP_OUT, cmd, value, idx,
(unsigned char *)bytes, size, DEFAULT_TIMEOUT);
@@ -245,7 +253,7 @@
/* This function sets the GPIOs connected to the LEDs as well as IO1-IO4. */
-static int dediprog_set_leds(int leds)
+static int dediprog_set_leds(int leds, const struct dediprog_data *dp_data)
{
if (leds < LED_NONE || leds > LED_ALL)
leds = LED_ALL;
@@ -260,18 +268,18 @@
* FIXME: take IO pins into account
*/
int target_leds, ret;
- if (protocol() >= PROTOCOL_V2) {
+ if (protocol(dp_data) >= PROTOCOL_V2) {
target_leds = (leds ^ 7) << 8;
- ret = dediprog_write(CMD_SET_IO_LED, target_leds, 0, NULL, 0);
+ ret = dediprog_write(dp_data->dediprog_handle, CMD_SET_IO_LED, target_leds, 0, NULL, 0);
} else {
- if (dediprog_firmwareversion < FIRMWARE_VERSION(5, 0, 0)) {
+ if (dp_data->dediprog_firmwareversion < FIRMWARE_VERSION(5, 0, 0)) {
target_leds = ((leds & LED_ERROR) >> 2) | ((leds & LED_PASS) << 2);
} else {
target_leds = leds;
}
target_leds ^= 7;
- ret = dediprog_write(CMD_SET_IO_LED, 0x9, target_leds, NULL, 0);
+ ret = dediprog_write(dp_data->dediprog_handle, CMD_SET_IO_LED, 0x9, target_leds, NULL, 0);
}
if (ret != 0x0) {
@@ -282,7 +290,7 @@
return 0;
}
-static int dediprog_set_spi_voltage(int millivolt)
+static int dediprog_set_spi_voltage(libusb_device_handle *dediprog_handle, int millivolt)
{
int ret;
uint16_t voltage_selector;
@@ -312,7 +320,7 @@
/* Wait some time as the original driver does. */
programmer_delay(200 * 1000);
}
- ret = dediprog_write(CMD_SET_VCC, voltage_selector, 0, NULL, 0);
+ ret = dediprog_write(dediprog_handle, CMD_SET_VCC, voltage_selector, 0, NULL, 0);
if (ret != 0x0) {
msg_perr("Command Set SPI Voltage 0x%x failed!\n",
voltage_selector);
@@ -342,9 +350,9 @@
{ NULL, 0x0 },
};
-static int dediprog_set_spi_speed(unsigned int spispeed_idx)
+static int dediprog_set_spi_speed(unsigned int spispeed_idx, const struct dediprog_data *dp_data)
{
- if (dediprog_firmwareversion < FIRMWARE_VERSION(5, 0, 0)) {
+ if (dp_data->dediprog_firmwareversion < FIRMWARE_VERSION(5, 0, 0)) {
msg_pwarn("Skipping to set SPI speed because firmware is too old.\n");
return 0;
}
@@ -352,7 +360,7 @@
const struct dediprog_spispeeds *spispeed = &spispeeds[spispeed_idx];
msg_pdbg("SPI speed is %sHz\n", spispeed->name);
- int ret = dediprog_write(CMD_SET_SPI_CLK, spispeed->speed, 0, NULL, 0);
+ int ret = dediprog_write(dp_data->dediprog_handle, CMD_SET_SPI_CLK, spispeed->speed, 0, NULL, 0);
if (ret != 0x0) {
msg_perr("Command Set SPI Speed 0x%x failed!\n", spispeed->speed);
return 1;
@@ -364,6 +372,8 @@
struct flashctx *const flash, uint8_t *data_packet, unsigned int count,
uint8_t dedi_spi_cmd, unsigned int *value, unsigned int *idx, unsigned int start, int is_read)
{
+ const struct dediprog_data *dp_data = flash->mst->spi.data;
+
if (count >= 1 << 16) {
msg_perr("%s: Unsupported transfer length of %u blocks! "
"Please report a bug at flashrom@flashrom.org\n",
@@ -378,7 +388,7 @@
data_packet[3] = dedi_spi_cmd; /* Read/Write Mode (currently READ_MODE_STD, WRITE_MODE_PAGE_PGM or WRITE_MODE_2B_AAI) */
data_packet[4] = 0; /* "Opcode". Specs imply necessity only for READ_MODE_4B_ADDR_FAST and WRITE_MODE_4B_ADDR_256B_PAGE_PGM */
- if (protocol() >= PROTOCOL_V2) {
+ if (protocol(dp_data) >= PROTOCOL_V2) {
if (is_read && flash->chip->feature_bits & FEATURE_4BA_FAST_READ) {
data_packet[3] = READ_MODE_4B_ADDR_FAST_0x0C;
data_packet[4] = JEDEC_READ_4BA_FAST;
@@ -394,7 +404,7 @@
data_packet[7] = (start >> 8) & 0xff;
data_packet[8] = (start >> 16) & 0xff;
data_packet[9] = (start >> 24) & 0xff;
- if (protocol() >= PROTOCOL_V3) {
+ if (protocol(dp_data) >= PROTOCOL_V3) {
if (is_read) {
data_packet[10] = 0x00; /* address length (3 or 4) */
data_packet[11] = 0x00; /* dummy cycle / 2 */
@@ -435,6 +445,7 @@
static int dediprog_spi_bulk_read(struct flashctx *flash, uint8_t *buf, unsigned int start, unsigned int len)
{
int err = 1;
+ const struct dediprog_data *dp_data = flash->mst->spi.data;
/* chunksize must be 512, other sizes will NOT work at all. */
const unsigned int chunksize = 512;
@@ -454,7 +465,7 @@
}
int command_packet_size;
- switch (protocol()) {
+ switch (protocol(dp_data)) {
case PROTOCOL_V1:
command_packet_size = 5;
break;
@@ -473,7 +484,8 @@
if (prepare_rw_cmd(flash, data_packet, count, READ_MODE_STD, &value, &idx, start, 1))
return 1;
- int ret = dediprog_write(CMD_READ, value, idx, data_packet, sizeof(data_packet));
+ int ret = dediprog_write(dp_data->dediprog_handle,
+ CMD_READ, value, idx, data_packet, sizeof(data_packet));
if (ret != (int)sizeof(data_packet)) {
msg_perr("Command Read SPI Bulk failed, %i %s!\n", ret, libusb_error_name(ret));
return 1;
@@ -501,7 +513,8 @@
(status.queued_idx - status.finished_idx) < DEDIPROG_ASYNC_TRANSFERS)
{
transfer = transfers[status.queued_idx % DEDIPROG_ASYNC_TRANSFERS];
- libusb_fill_bulk_transfer(transfer, dediprog_handle, 0x80 | dediprog_in_endpoint,
+ libusb_fill_bulk_transfer(transfer,
+ dp_data->dediprog_handle, 0x80 | dp_data->dediprog_in_endpoint,
(unsigned char *)buf + status.queued_idx * chunksize, chunksize,
dediprog_bulk_read_cb, &status, DEFAULT_TIMEOUT);
transfer->flags |= LIBUSB_TRANSFER_SHORT_NOT_OK;
@@ -513,11 +526,11 @@
}
++status.queued_idx;
}
- if (dediprog_bulk_read_poll(&status, 0))
+ if (dediprog_bulk_read_poll(dp_data->usb_ctx, &status, 0))
goto err_free;
}
/* Wait for transfers to finish. */
- if (dediprog_bulk_read_poll(&status, 1))
+ if (dediprog_bulk_read_poll(dp_data->usb_ctx, &status, 0))
goto err_free;
/* Check if everything has been transmitted. */
if ((status.finished_idx < count) || status.error)
@@ -526,7 +539,7 @@
err = 0;
err_free:
- dediprog_bulk_read_poll(&status, 1);
+ dediprog_bulk_read_poll(dp_data->usb_ctx, &status, 1);
for (i = 0; i < DEDIPROG_ASYNC_TRANSFERS; ++i)
if (transfers[i]) libusb_free_transfer(transfers[i]);
return err;
@@ -539,8 +552,9 @@
const unsigned int chunksize = 0x200;
unsigned int residue = start % chunksize ? min(len, chunksize - start % chunksize) : 0;
unsigned int bulklen;
+ const struct dediprog_data *dp_data = flash->mst->spi.data;
- dediprog_set_leds(LED_BUSY);
+ dediprog_set_leds(LED_BUSY, dp_data);
if (residue) {
msg_pdbg("Slow read for partial block from 0x%x, length 0x%x\n",
@@ -566,10 +580,10 @@
goto err;
}
- dediprog_set_leds(LED_PASS);
+ dediprog_set_leds(LED_PASS, dp_data);
return 0;
err:
- dediprog_set_leds(LED_ERROR);
+ dediprog_set_leds(LED_ERROR, dp_data);
return ret;
}
@@ -588,6 +602,7 @@
* space in a USB bulk transfer must be filled with 0xff padding.
*/
const unsigned int count = len / chunksize;
+ const struct dediprog_data *dp_data = flash->mst->spi.data;
/*
* We should change this check to
@@ -611,7 +626,7 @@
return 0;
int command_packet_size;
- switch (protocol()) {
+ switch (protocol(dp_data)) {
case PROTOCOL_V1:
command_packet_size = 5;
break;
@@ -629,7 +644,8 @@
unsigned int value, idx;
if (prepare_rw_cmd(flash, data_packet, count, dedi_spi_cmd, &value, &idx, start, 0))
return 1;
- int ret = dediprog_write(CMD_WRITE, value, idx, data_packet, sizeof(data_packet));
+ int ret = dediprog_write(dp_data->dediprog_handle,
+ CMD_WRITE, value, idx, data_packet, sizeof(data_packet));
if (ret != (int)sizeof(data_packet)) {
msg_perr("Command Write SPI Bulk failed, %s!\n", libusb_error_name(ret));
return 1;
@@ -641,7 +657,8 @@
memcpy(usbbuf, buf + i * chunksize, chunksize);
memset(usbbuf + chunksize, 0xff, sizeof(usbbuf) - chunksize); // fill up with 0xFF
int transferred;
- ret = libusb_bulk_transfer(dediprog_handle, dediprog_out_endpoint, usbbuf, 512, &transferred,
+ ret = libusb_bulk_transfer(dp_data->dediprog_handle, dp_data->dediprog_out_endpoint,
+ usbbuf, 512, &transferred,
DEFAULT_TIMEOUT);
if ((ret < 0) || (transferred != 512)) {
msg_perr("SPI bulk write failed, expected %i, got %s!\n", 512, libusb_error_name(ret));
@@ -659,8 +676,9 @@
const unsigned int chunksize = flash->chip->page_size;
unsigned int residue = start % chunksize ? chunksize - start % chunksize : 0;
unsigned int bulklen;
+ const struct dediprog_data *dp_data = flash->mst->spi.data;
- dediprog_set_leds(LED_BUSY);
+ dediprog_set_leds(LED_BUSY, dp_data);
if (chunksize != 256) {
msg_pdbg("Page sizes other than 256 bytes are unsupported as "
@@ -675,7 +693,7 @@
/* No idea about the real limit. Maybe 16 including command and address, maybe more. */
ret = spi_write_chunked(flash, buf, start, residue, 11);
if (ret) {
- dediprog_set_leds(LED_ERROR);
+ dediprog_set_leds(LED_ERROR, dp_data);
return ret;
}
}
@@ -684,7 +702,7 @@
bulklen = (len - residue) / chunksize * chunksize;
ret = dediprog_spi_bulk_write(flash, buf + residue, chunksize, start + residue, bulklen, dedi_spi_cmd);
if (ret) {
- dediprog_set_leds(LED_ERROR);
+ dediprog_set_leds(LED_ERROR, dp_data);
return ret;
}
@@ -695,12 +713,12 @@
ret = spi_write_chunked(flash, buf + residue + bulklen,
start + residue + bulklen, len, 11);
if (ret) {
- dediprog_set_leds(LED_ERROR);
+ dediprog_set_leds(LED_ERROR, dp_data);
return ret;
}
}
- dediprog_set_leds(LED_PASS);
+ dediprog_set_leds(LED_PASS, dp_data);
return 0;
}
@@ -721,6 +739,7 @@
unsigned char *readarr)
{
int ret;
+ const struct dediprog_data *dp_data = flash->mst->spi.data;
msg_pspew("%s, writecnt=%i, readcnt=%i\n", __func__, writecnt, readcnt);
if (writecnt > flash->mst->spi.max_data_write) {
@@ -735,14 +754,14 @@
unsigned int idx, value;
/* New protocol has options and timeout combined as value while the old one used the value field for
* timeout and the index field for options. */
- if (protocol() >= PROTOCOL_V2) {
+ if (protocol(dp_data) >= PROTOCOL_V2) {
idx = 0;
value = readcnt ? 0x1 : 0x0; // Indicate if we require a read
} else {
idx = readcnt ? 0x1 : 0x0; // Indicate if we require a read
value = 0;
}
- ret = dediprog_write(CMD_TRANSCEIVE, value, idx, writearr, writecnt);
+ ret = dediprog_write(dp_data->dediprog_handle, CMD_TRANSCEIVE, value, idx, writearr, writecnt);
if (ret != (int)writecnt) {
msg_perr("Send SPI failed, expected %i, got %i %s!\n",
writecnt, ret, libusb_error_name(ret));
@@ -767,9 +786,9 @@
idx = (0 & 0xFF); // Lower byte is option (0x01 = require SR, 0x02 keep CS low)
value = min(read_timeout, 0xFF); // Possibly two bytes but we play safe here
}
- ret = dediprog_read(CMD_TRANSCEIVE, value, idx, readarr, readcnt);
+ ret = dediprog_read(dp_data->dediprog_handle, CMD_TRANSCEIVE, value, idx, readarr, readcnt);
*/
- ret = dediprog_read(CMD_TRANSCEIVE, 0, 0, readarr, readcnt);
+ ret = dediprog_read(dp_data->dediprog_handle, CMD_TRANSCEIVE, 0, 0, readarr, readcnt);
if (ret != (int)readcnt) {
msg_perr("Receive SPI failed, expected %i, got %i %s!\n", readcnt, ret, libusb_error_name(ret));
return 1;
@@ -777,13 +796,13 @@
return 0;
}
-static int dediprog_check_devicestring(void)
+static int dediprog_check_devicestring(struct dediprog_data *dp_data)
{
int ret;
char buf[0x11];
/* Command Receive Device String. */
- ret = dediprog_read(CMD_READ_PROG_INFO, 0, 0, (uint8_t *)buf, 0x10);
+ ret = dediprog_read(dp_data->dediprog_handle, CMD_READ_PROG_INFO, 0, 0, (uint8_t *)buf, 0x10);
if (ret != 0x10) {
msg_perr("Incomplete/failed Command Receive Device String!\n");
return 1;
@@ -791,11 +810,11 @@
buf[0x10] = '\0';
msg_pdbg("Found a %s\n", buf);
if (memcmp(buf, "SF100", 0x5) == 0)
- dediprog_devicetype = DEV_SF100;
+ dp_data->dediprog_devicetype = DEV_SF100;
else if (memcmp(buf, "SF200", 0x5) == 0)
- dediprog_devicetype = DEV_SF200;
+ dp_data->dediprog_devicetype = DEV_SF200;
else if (memcmp(buf, "SF600", 0x5) == 0)
- dediprog_devicetype = DEV_SF600;
+ dp_data->dediprog_devicetype = DEV_SF600;
else {
msg_perr("Device not a SF100, SF200, or SF600!\n");
return 1;
@@ -804,7 +823,7 @@
int sfnum;
int fw[3];
if (sscanf(buf, "SF%d V:%d.%d.%d ", &sfnum, &fw[0], &fw[1], &fw[2]) != 4 ||
- sfnum != (int)dediprog_devicetype) {
+ sfnum != (int)dp_data->dediprog_devicetype) {
msg_perr("Unexpected firmware version string '%s'\n", buf);
return 1;
}
@@ -814,8 +833,8 @@
return 1;
}
- dediprog_firmwareversion = FIRMWARE_VERSION(fw[0], fw[1], fw[2]);
- if (protocol() == PROTOCOL_UNKNOWN) {
+ dp_data->dediprog_firmwareversion = FIRMWARE_VERSION(fw[0], fw[1], fw[2]);
+ if (protocol(dp_data) == PROTOCOL_UNKNOWN) {
msg_perr("Internal error: Unable to determine protocol version.\n");
return 1;
}
@@ -831,7 +850,7 @@
* much different.
* @return the id on success, -1 on failure
*/
-static int dediprog_read_id(void)
+static int dediprog_read_id(libusb_device_handle *dediprog_handle)
{
int ret;
uint8_t buf[3];
@@ -859,7 +878,7 @@
/* This command presumably sets the voltage for the SF100 itself (not the SPI flash).
* Only use dediprog_set_voltage on SF100 programmers with firmware older
* than V6.0.0. Newer programmers (including all SF600s) do not support it. */
-static int dediprog_set_voltage(void)
+static int dediprog_set_voltage(libusb_device_handle *dediprog_handle)
{
unsigned char buf[1] = {0};
int ret = libusb_control_transfer(dediprog_handle, REQTYPE_OTHER_IN, CMD_SET_VOLTAGE, 0x0, 0x0,
@@ -876,15 +895,16 @@
return 0;
}
-static int dediprog_standalone_mode(void)
+static int dediprog_standalone_mode(const struct dediprog_data *dp_data)
{
int ret;
- if (dediprog_devicetype != DEV_SF600)
+ if (dp_data->dediprog_devicetype != DEV_SF600)
return 0;
msg_pdbg2("Disabling standalone mode.\n");
- ret = dediprog_write(CMD_SET_STANDALONE, LEAVE_STANDALONE_MODE, 0, NULL, 0);
+ ret = dediprog_write(dp_data->dediprog_handle,
+ CMD_SET_STANDALONE, LEAVE_STANDALONE_MODE, 0, NULL, 0);
if (ret) {
msg_perr("Failed to disable standalone mode: %s\n", libusb_error_name(ret));
return 1;
@@ -898,7 +918,7 @@
* Present in eng_detect_blink.log with firmware 3.1.8
* Always preceded by Command Receive Device String
*/
-static int dediprog_command_b(void)
+static int dediprog_command_b(libusb_device_handle *dediprog_handle)
{
int ret;
char buf[0x3];
@@ -919,9 +939,9 @@
}
#endif
-static int set_target_flash(enum dediprog_target target)
+static int set_target_flash(libusb_device_handle *dediprog_handle, enum dediprog_target target)
{
- int ret = dediprog_write(CMD_SET_TARGET, target, 0, NULL, 0);
+ int ret = dediprog_write(dediprog_handle, CMD_SET_TARGET, target, 0, NULL, 0);
if (ret != 0) {
msg_perr("set_target_flash failed (%s)!\n", libusb_error_name(ret));
return 1;
@@ -931,7 +951,7 @@
#if 0
/* Returns true if the button is currently pressed. */
-static bool dediprog_get_button(void)
+static bool dediprog_get_button(libusb_device_handle *dediprog_handle)
{
char buf[1];
int ret = usb_control_msg(dediprog_handle, REQTYPE_EP_IN, CMD_GET_BUTTON, 0, 0,
@@ -1008,30 +1028,31 @@
* @index index of the USB device
* @return 0 for success, -1 for error, -2 for busy device
*/
-static int dediprog_open(int index)
+static int dediprog_open(int index, struct dediprog_data *dp_data)
{
const uint16_t vid = devs_dediprog[0].vendor_id;
const uint16_t pid = devs_dediprog[0].device_id;
int ret;
- dediprog_handle = usb_dev_get_by_vid_pid_number(usb_ctx, vid, pid, (unsigned int) index);
- if (!dediprog_handle) {
+ dp_data->dediprog_handle = usb_dev_get_by_vid_pid_number(dp_data->usb_ctx,
+ vid, pid, (unsigned int) index);
+ if (!dp_data->dediprog_handle) {
msg_perr("Could not find a Dediprog programmer on USB.\n");
- libusb_exit(usb_ctx);
+ libusb_exit(dp_data->usb_ctx);
return -1;
}
- ret = libusb_set_configuration(dediprog_handle, 1);
+ ret = libusb_set_configuration(dp_data->dediprog_handle, 1);
if (ret != 0) {
msg_perr("Could not set USB device configuration: %i %s\n",
ret, libusb_error_name(ret));
- libusb_close(dediprog_handle);
+ libusb_close(dp_data->dediprog_handle);
return -2;
}
- ret = libusb_claim_interface(dediprog_handle, 0);
+ ret = libusb_claim_interface(dp_data->dediprog_handle, 0);
if (ret < 0) {
msg_perr("Could not claim USB device interface %i: %i %s\n",
0, ret, libusb_error_name(ret));
- libusb_close(dediprog_handle);
+ libusb_close(dp_data->dediprog_handle);
return -2;
}
return 0;
@@ -1039,20 +1060,25 @@
static int dediprog_shutdown(void *data)
{
- dediprog_devicetype = DEV_UNKNOWN;
+ int ret = 0;
+ struct dediprog_data *dp_data = data;
/* URB 28. Command Set SPI Voltage to 0. */
- if (dediprog_set_spi_voltage(0x0))
- return 1;
-
- if (libusb_release_interface(dediprog_handle, 0)) {
- msg_perr("Could not release USB interface!\n");
- return 1;
+ if (dediprog_set_spi_voltage(dp_data->dediprog_handle, 0x0)) {
+ ret = 1;
+ goto out;
}
- libusb_close(dediprog_handle);
- libusb_exit(usb_ctx);
- return 0;
+ if (libusb_release_interface(dp_data->dediprog_handle, 0)) {
+ msg_perr("Could not release USB interface!\n");
+ ret = 1;
+ goto out;
+ }
+ libusb_close(dp_data->dediprog_handle);
+ libusb_exit(dp_data->usb_ctx);
+out:
+ free(data);
+ return ret;
}
static int dediprog_init(void)
@@ -1176,19 +1202,27 @@
}
free(target_str);
- /* Here comes the USB stuff. */
- libusb_init(&usb_ctx);
- if (!usb_ctx) {
- msg_perr("Could not initialize libusb!\n");
+ struct dediprog_data *dp_data = calloc(1, sizeof(*dp_data));
+ if (!dp_data) {
+ msg_perr("Unable to allocate space for SPI master data\n");
return 1;
}
+ dp_data->dediprog_firmwareversion = FIRMWARE_VERSION(0, 0, 0);
+ dp_data->dediprog_devicetype = DEV_UNKNOWN;
+
+ /* Here comes the USB stuff. */
+ libusb_init(&dp_data->usb_ctx);
+ if (!dp_data->usb_ctx) {
+ msg_perr("Could not initialize libusb!\n");
+ goto init_err_exit;
+ }
if (id != -1) {
for (i = 0; ; i++) {
- ret = dediprog_open(i);
+ ret = dediprog_open(i, dp_data);
if (ret == -1) {
/* no dev */
- return 1;
+ goto init_err_exit;
} else if (ret == -2) {
/* busy dev */
continue;
@@ -1201,26 +1235,26 @@
* device is in use by another instance of flashrom),
* the device is skipped and the next device is tried.
*/
- found_id = dediprog_read_id();
+ found_id = dediprog_read_id(dp_data->dediprog_handle);
if (found_id < 0) {
msg_perr("Could not read id.\n");
- libusb_release_interface(dediprog_handle, 0);
- libusb_close(dediprog_handle);
+ libusb_release_interface(dp_data->dediprog_handle, 0);
+ libusb_close(dp_data->dediprog_handle);
continue;
}
msg_pinfo("Found dediprog id SF%06d.\n", found_id);
if (found_id != id) {
- libusb_release_interface(dediprog_handle, 0);
- libusb_close(dediprog_handle);
+ libusb_release_interface(dp_data->dediprog_handle, 0);
+ libusb_close(dp_data->dediprog_handle);
continue;
}
break;
}
} else {
- if (dediprog_open(usedevice)) {
- return 1;
+ if (dediprog_open(usedevice, dp_data)) {
+ goto init_err_exit;
}
- found_id = dediprog_read_id();
+ found_id = dediprog_read_id(dp_data->dediprog_handle);
}
if (found_id >= 0) {
@@ -1229,58 +1263,63 @@
/* Try reading the devicestring. If that fails and the device is old (FW < 6.0.0, which we can not know)
* then we need to try the "set voltage" command and then attempt to read the devicestring again. */
- if (dediprog_check_devicestring()) {
- if (dediprog_set_voltage())
+ if (dediprog_check_devicestring(dp_data)) {
+ if (dediprog_set_voltage(dp_data->dediprog_handle))
goto init_err_cleanup_exit;
- if (dediprog_check_devicestring())
+ if (dediprog_check_devicestring(dp_data))
goto init_err_cleanup_exit;
}
/* SF100/SF200 uses one in/out endpoint, SF600 uses separate in/out endpoints */
- dediprog_in_endpoint = 2;
- switch (dediprog_devicetype) {
+ dp_data->dediprog_in_endpoint = 2;
+ switch (dp_data->dediprog_devicetype) {
case DEV_SF100:
case DEV_SF200:
- dediprog_out_endpoint = 2;
+ dp_data->dediprog_out_endpoint = 2;
break;
default:
- dediprog_out_endpoint = 1;
+ dp_data->dediprog_out_endpoint = 1;
break;
}
/* Set all possible LEDs as soon as possible to indicate activity.
* Because knowing the firmware version is required to set the LEDs correctly we need to this after
* dediprog_check_devicestring() has queried the device. */
- dediprog_set_leds(LED_ALL);
+ dediprog_set_leds(LED_ALL, dp_data);
/* Select target/socket, frequency and VCC. */
- if (set_target_flash(target) ||
- dediprog_set_spi_speed(spispeed_idx) ||
- dediprog_set_spi_voltage(millivolt)) {
- dediprog_set_leds(LED_ERROR);
+ if (set_target_flash(dp_data->dediprog_handle, target) ||
+ dediprog_set_spi_speed(spispeed_idx, dp_data) ||
+ dediprog_set_spi_voltage(dp_data->dediprog_handle, millivolt)) {
+ dediprog_set_leds(LED_ERROR, dp_data);
goto init_err_cleanup_exit;
}
- if (dediprog_standalone_mode())
+ if (dediprog_standalone_mode(dp_data))
goto init_err_cleanup_exit;
- if ((dediprog_devicetype == DEV_SF100) ||
- (dediprog_devicetype == DEV_SF600 && protocol() == PROTOCOL_V3))
+ if ((dp_data->dediprog_devicetype == DEV_SF100) ||
+ (dp_data->dediprog_devicetype == DEV_SF600 && protocol(dp_data) == PROTOCOL_V3))
spi_master_dediprog.features &= ~SPI_MASTER_NO_4BA_MODES;
- if (protocol() >= PROTOCOL_V2)
+ if (protocol(dp_data) >= PROTOCOL_V2)
spi_master_dediprog.features |= SPI_MASTER_4BA;
- if (register_shutdown(dediprog_shutdown, NULL))
+ if (register_shutdown(dediprog_shutdown, dp_data))
goto init_err_cleanup_exit;
- if (register_spi_master(&spi_master_dediprog) || dediprog_set_leds(LED_NONE))
+ spi_master_dediprog.data = dp_data;
+ if (register_spi_master(&spi_master_dediprog) || dediprog_set_leds(LED_NONE, dp_data))
return 1; /* shutdown function does cleanup */
return 0;
init_err_cleanup_exit:
- dediprog_shutdown(NULL);
+ dediprog_shutdown(dp_data);
+ return 1;
+
+init_err_exit:
+ free(dp_data);
return 1;
}