Add support for MSI KT4V
The KT4V is autodetected and supports the KT3 Ultra 2 with "-m msi:kt4v"
(but is not autodetected, yet).
Corresponding to flashrom svn r309 and coreboot v2 svn r3528.
Signed-off-by: Sean Nelson <snelson@nmt.edu>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
diff --git a/board_enable.c b/board_enable.c
index f267787..e2a87c6 100644
--- a/board_enable.c
+++ b/board_enable.c
@@ -548,6 +548,51 @@
}
/**
+ * Winbond W83697HF Super I/O + VIA VT8235 southbridge
+ *
+ * Suited for:
+ * - MSI KT4V and KT4V-L: AMD K7 + VIA KT400 + VT8235
+ * - MSI KT3 Ultra2: AMD K7 + VIA KT333 + VT8235
+ */
+static int board_msi_kt4v(const char *name)
+{
+ struct pci_dev *dev;
+ uint8_t val;
+ uint32_t val2;
+ uint16_t port;
+
+ dev = pci_dev_find(0x1106, 0x3177); /* VT8235 ISA bridge */
+ if (!dev) {
+ fprintf(stderr, "\nERROR: VT823x ISA bridge not found.\n");
+ return -1;
+ }
+
+ val = pci_read_byte(dev, 0x59);
+ val &= 0x0c;
+ pci_write_byte(dev, 0x59, val);
+
+ /* We need the I/O Base Address for this board's flash enable. */
+ port = pci_read_word(dev, 0x88) & 0xff80;
+
+ /* Starting at 'I/O Base + 0x4c' is the GPO Port Output Value.
+ * We must assert GPO12 for our enable, which is in 0x4d.
+ */
+ val2 = INB(port + 0x4d);
+ val2 |= 0x10;
+ OUTB(val2, port + 0x4d);
+
+ /* Raise ROM MEMW# line on Winbond W83697 Super I/O. */
+ w836xx_ext_enter(0x2e);
+ if (!(wbsio_read(0x2e, 0x24) & 0x02)) { /* Flash ROM enabled? */
+ /* Enable MEMW# and set ROM size select to max. (4M). */
+ wbsio_mask(0x2e, 0x24, 0x28, 0x28);
+ }
+ w836xx_ext_leave(0x2e);
+
+ return 0;
+}
+
+/**
* We use 2 sets of IDs here, you're free to choose which is which. This
* is to provide a very high degree of certainty when matching a board on
* the basis of subsystem/card IDs. As not every vendor handles
@@ -581,6 +626,8 @@
};
struct board_pciid_enable board_pciid_enables[] = {
+ {0x1106, 0x0571, 0x1462, 0x7120, 0x0000, 0x0000, 0x0000, 0x0000,
+ "msi", "kt4v", "MSI KT4V", board_msi_kt4v},
{0x8086, 0x1a30, 0x1043, 0x8070, 0x8086, 0x244b, 0x1043, 0x8028,
NULL, NULL, "ASUS P4B266", ich2_gpio22_raise},
{0x10de, 0x0360, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,