Add W25Q...W series
- Use ".V" (and "_V" in macros) for 3.3V Winbond 25Q chips.
Rename the existing chips and add a .voltage entry where it was missing.
- Use ".W" (and "_W" in macros) for 1.8V Winbond 25Q chips.
- Add W25Q20.W, W25Q40.W, W25Q80.W, W25Q16.W, W25Q32.W, W25Q64.W.
Based on chromiumos' 469707f0d9b7d81b6c6bb2cace13f09db70f4382
http://git.chromium.org/gitweb/?p=chromiumos/third_party/flashrom.git;a=commitdiff;h=469707f0d9b7d81b6c6bb2cace13f09db70f4382
Corresponding to flashrom svn r1677.
Signed-off-by: Yung-Chieh Lo <yjlou%chromium.org@gtempaccount.com>
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
diff --git a/flashchips.c b/flashchips.c
index cbbb138..6ec3749 100644
--- a/flashchips.c
+++ b/flashchips.c
@@ -10007,13 +10007,14 @@
{
.vendor = "Winbond",
- .name = "W25Q80",
+ .name = "W25Q80.V",
.bustype = BUS_SPI,
.manufacture_id = WINBOND_NEX_ID,
- .model_id = WINBOND_NEX_W25Q80,
+ .model_id = WINBOND_NEX_W25Q80_V,
.total_size = 1024,
.page_size = 256,
- /* OTP: 1024B total, 256B reserved; read 0x48; write 0x42 */
+ /* supports SFDP */
+ /* OTP: 1024B total, 256B reserved; read 0x48; write 0x42, erase 0x44, read ID 0x4B */
.feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP,
.tested = TEST_OK_PREW,
.probe = probe_spi_rdid,
@@ -10046,13 +10047,14 @@
{
.vendor = "Winbond",
- .name = "W25Q16",
+ .name = "W25Q16.V",
.bustype = BUS_SPI,
.manufacture_id = WINBOND_NEX_ID,
- .model_id = WINBOND_NEX_W25Q16,
+ .model_id = WINBOND_NEX_W25Q16_V,
.total_size = 2048,
.page_size = 256,
- /* OTP: 1024B total, 256B reserved; read 0x48; write 0x42 */
+ /* supports SFDP */
+ /* OTP: 1024B total, 256B reserved; read 0x48; write 0x42, erase 0x44, read ID 0x4B */
.feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP,
.tested = TEST_OK_PREW,
.probe = probe_spi_rdid,
@@ -10085,13 +10087,14 @@
{
.vendor = "Winbond",
- .name = "W25Q32",
+ .name = "W25Q32.V",
.bustype = BUS_SPI,
.manufacture_id = WINBOND_NEX_ID,
- .model_id = WINBOND_NEX_W25Q32,
+ .model_id = WINBOND_NEX_W25Q32_V,
.total_size = 4096,
.page_size = 256,
- /* OTP: 1024B total, 256B reserved; read 0x48; write 0x42 */
+ /* supports SFDP */
+ /* OTP: 1024B total, 256B reserved; read 0x48; write 0x42, erase 0x44, read ID 0x4B */
.feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP,
.tested = TEST_OK_PREW,
.probe = probe_spi_rdid,
@@ -10124,13 +10127,14 @@
{
.vendor = "Winbond",
- .name = "W25Q64",
+ .name = "W25Q64.V",
.bustype = BUS_SPI,
.manufacture_id = WINBOND_NEX_ID,
- .model_id = WINBOND_NEX_W25Q64,
+ .model_id = WINBOND_NEX_W25Q64_V,
.total_size = 8192,
.page_size = 256,
- /* OTP: 1024B total, 256B reserved; read 0x48; write 0x42 */
+ /* supports SFDP */
+ /* OTP: 1024B total, 256B reserved; read 0x48; write 0x42, erase 0x44, read ID 0x4B */
.feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP,
.tested = TEST_OK_PREW,
.probe = probe_spi_rdid,
@@ -10158,17 +10162,19 @@
.unlock = spi_disable_blockprotect,
.write = spi_chip_write_256,
.read = spi_chip_read,
+ .voltage = {2700, 3600},
},
{
.vendor = "Winbond",
- .name = "W25Q128",
+ .name = "W25Q128.V",
.bustype = BUS_SPI,
.manufacture_id = WINBOND_NEX_ID,
- .model_id = WINBOND_NEX_W25Q128,
+ .model_id = WINBOND_NEX_W25Q128_V,
.total_size = 16384,
.page_size = 256,
- /* OTP: 1024B total, 256B reserved; read 0x48; write 0x42 */
+ /* supports SFDP */
+ /* OTP: 1024B total, 256B reserved; read 0x48; write 0x42, erase 0x44, read ID 0x4B */
.feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP,
.tested = TEST_OK_PROBE,
.probe = probe_spi_rdid,
@@ -10196,6 +10202,244 @@
.unlock = spi_disable_blockprotect,
.write = spi_chip_write_256,
.read = spi_chip_read,
+ .voltage = {2700, 3600},
+ },
+
+ {
+ .vendor = "Winbond",
+ .name = "W25Q20.W",
+ .bustype = BUS_SPI,
+ .manufacture_id = WINBOND_NEX_ID,
+ .model_id = WINBOND_NEX_W25Q20_W,
+ .total_size = 256,
+ .page_size = 256,
+ /* OTP: 256B total; read 0x48; write 0x42, erase 0x44, read ID 0x4B */
+ .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP,
+ .tested = TEST_UNTESTED,
+ .probe = probe_spi_rdid,
+ .probe_timing = TIMING_ZERO,
+ .block_erasers =
+ {
+ {
+ .eraseblocks = { {4 * 1024, 64} },
+ .block_erase = spi_block_erase_20,
+ }, {
+ .eraseblocks = { {32 * 1024, 8} },
+ .block_erase = spi_block_erase_52,
+ }, {
+ .eraseblocks = { {64 * 1024, 4} },
+ .block_erase = spi_block_erase_d8,
+ }, {
+ .eraseblocks = { {256 * 1024, 1} },
+ .block_erase = spi_block_erase_60,
+ }, {
+ .eraseblocks = { {256 * 1024, 1} },
+ .block_erase = spi_block_erase_c7,
+ }
+ },
+ .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */
+ .unlock = spi_disable_blockprotect,
+ .write = spi_chip_write_256,
+ .read = spi_chip_read,
+ .voltage = {1700, 1950}, /* Fast read (0x0B) and multi I/O supported */
+ },
+
+ {
+ .vendor = "Winbond",
+ .name = "W25Q40.W",
+ .bustype = BUS_SPI,
+ .manufacture_id = WINBOND_NEX_ID,
+ .model_id = WINBOND_NEX_W25Q40_W,
+ .total_size = 512,
+ .page_size = 256,
+ /* OTP: 256B total; read 0x48; write 0x42, erase 0x44, read ID 0x4B */
+ .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP,
+ .tested = TEST_UNTESTED,
+ .probe = probe_spi_rdid,
+ .probe_timing = TIMING_ZERO,
+ .block_erasers =
+ {
+ {
+ .eraseblocks = { {4 * 1024, 128} },
+ .block_erase = spi_block_erase_20,
+ }, {
+ .eraseblocks = { {32 * 1024, 16} },
+ .block_erase = spi_block_erase_52,
+ }, {
+ .eraseblocks = { {64 * 1024, 8} },
+ .block_erase = spi_block_erase_d8,
+ }, {
+ .eraseblocks = { {512 * 1024, 1} },
+ .block_erase = spi_block_erase_60,
+ }, {
+ .eraseblocks = { {512 * 1024, 1} },
+ .block_erase = spi_block_erase_c7,
+ }
+ },
+ .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */
+ .unlock = spi_disable_blockprotect,
+ .write = spi_chip_write_256,
+ .read = spi_chip_read,
+ .voltage = {1700, 1950}, /* Fast read (0x0B) and multi I/O supported */
+ },
+
+ {
+ .vendor = "Winbond",
+ .name = "W25Q80.W",
+ .bustype = BUS_SPI,
+ .manufacture_id = WINBOND_NEX_ID,
+ .model_id = WINBOND_NEX_W25Q80_W,
+ .total_size = 1024,
+ .page_size = 256,
+ /* OTP: 256B total; read 0x48; write 0x42, erase 0x44, read ID 0x4B */
+ .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP,
+ .tested = TEST_UNTESTED,
+ .probe = probe_spi_rdid,
+ .probe_timing = TIMING_ZERO,
+ .block_erasers =
+ {
+ {
+ .eraseblocks = { {4 * 1024, 256} },
+ .block_erase = spi_block_erase_20,
+ }, {
+ .eraseblocks = { {32 * 1024, 32} },
+ .block_erase = spi_block_erase_52,
+ }, {
+ .eraseblocks = { {64 * 1024, 16} },
+ .block_erase = spi_block_erase_d8,
+ }, {
+ .eraseblocks = { {1 * 1024 * 1024, 1} },
+ .block_erase = spi_block_erase_60,
+ }, {
+ .eraseblocks = { {1 * 1024 * 1024, 1} },
+ .block_erase = spi_block_erase_c7,
+ }
+ },
+ .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */
+ .unlock = spi_disable_blockprotect,
+ .write = spi_chip_write_256,
+ .read = spi_chip_read,
+ .voltage = {1700, 1950}, /* Fast read (0x0B) and multi I/O supported */
+ },
+
+ {
+ .vendor = "Winbond",
+ .name = "W25Q16.W",
+ .bustype = BUS_SPI,
+ .manufacture_id = WINBOND_NEX_ID,
+ .model_id = WINBOND_NEX_W25Q16_W,
+ .total_size = 2048,
+ .page_size = 256,
+ /* OTP: 256B total; read 0x48; write 0x42, erase 0x44, read ID 0x4B */
+ /* QPI enable 0x38, disable 0xFF */
+ .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP | FEATURE_QPI,
+ .tested = TEST_UNTESTED,
+ .probe = probe_spi_rdid,
+ .probe_timing = TIMING_ZERO,
+ .block_erasers =
+ {
+ {
+ .eraseblocks = { {4 * 1024, 512} },
+ .block_erase = spi_block_erase_20,
+ }, {
+ .eraseblocks = { {32 * 1024, 64} },
+ .block_erase = spi_block_erase_52,
+ }, {
+ .eraseblocks = { {64 * 1024, 32} },
+ .block_erase = spi_block_erase_d8,
+ }, {
+ .eraseblocks = { {2 * 1024 * 1024, 1} },
+ .block_erase = spi_block_erase_60,
+ }, {
+ .eraseblocks = { {2 * 1024 * 1024, 1} },
+ .block_erase = spi_block_erase_c7,
+ }
+ },
+ .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */
+ .unlock = spi_disable_blockprotect,
+ .write = spi_chip_write_256,
+ .read = spi_chip_read,
+ .voltage = {1700, 1950}, /* Fast read (0x0B) and multi I/O supported */
+ },
+
+ {
+ .vendor = "Winbond",
+ .name = "W25Q32.W",
+ .bustype = BUS_SPI,
+ .manufacture_id = WINBOND_NEX_ID,
+ .model_id = WINBOND_NEX_W25Q32_W,
+ .total_size = 4096,
+ .page_size = 256,
+ /* OTP: 256B total; read 0x48; write 0x42, erase 0x44, read ID 0x4B */
+ /* QPI enable 0x38, disable 0xFF */
+ .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP | FEATURE_QPI,
+ .tested = TEST_OK_PREW,
+ .probe = probe_spi_rdid,
+ .probe_timing = TIMING_ZERO,
+ .block_erasers =
+ {
+ {
+ .eraseblocks = { {4 * 1024, 1024} },
+ .block_erase = spi_block_erase_20,
+ }, {
+ .eraseblocks = { {32 * 1024, 128} },
+ .block_erase = spi_block_erase_52,
+ }, {
+ .eraseblocks = { {64 * 1024, 64} },
+ .block_erase = spi_block_erase_d8,
+ }, {
+ .eraseblocks = { {4 * 1024 * 1024, 1} },
+ .block_erase = spi_block_erase_60,
+ }, {
+ .eraseblocks = { {4 * 1024 * 1024, 1} },
+ .block_erase = spi_block_erase_c7,
+ }
+ },
+ .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */
+ .unlock = spi_disable_blockprotect,
+ .write = spi_chip_write_256,
+ .read = spi_chip_read,
+ .voltage = {1700, 1950}, /* Fast read (0x0B) and multi I/O supported */
+ },
+
+ {
+ .vendor = "Winbond",
+ .name = "W25Q64.W",
+ .bustype = BUS_SPI,
+ .manufacture_id = WINBOND_NEX_ID,
+ .model_id = WINBOND_NEX_W25Q64_W,
+ .total_size = 8192,
+ .page_size = 256,
+ /* OTP: 256B total; read 0x48; write 0x42, erase 0x44, read ID 0x4B */
+ /* QPI enable 0x38, disable 0xFF */
+ .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP | FEATURE_QPI,
+ .tested = TEST_UNTESTED,
+ .probe = probe_spi_rdid,
+ .probe_timing = TIMING_ZERO,
+ .block_erasers =
+ {
+ {
+ .eraseblocks = { {4 * 1024, 2048} },
+ .block_erase = spi_block_erase_20,
+ }, {
+ .eraseblocks = { {32 * 1024, 256} },
+ .block_erase = spi_block_erase_52,
+ }, {
+ .eraseblocks = { {64 * 1024, 128} },
+ .block_erase = spi_block_erase_d8,
+ }, {
+ .eraseblocks = { {8 * 1024 * 1024, 1} },
+ .block_erase = spi_block_erase_60,
+ }, {
+ .eraseblocks = { {8 * 1024 * 1024, 1} },
+ .block_erase = spi_block_erase_c7,
+ }
+ },
+ .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */
+ .unlock = spi_disable_blockprotect,
+ .write = spi_chip_write_256,
+ .read = spi_chip_read,
+ .voltage = {1700, 1950}, /* Fast read (0x0B) and multi I/O supported */
},
{
diff --git a/flashchips.h b/flashchips.h
index 62be293..41903d2 100644
--- a/flashchips.h
+++ b/flashchips.h
@@ -655,12 +655,20 @@
#define WINBOND_NEX_W25X16 0x3015
#define WINBOND_NEX_W25X32 0x3016
#define WINBOND_NEX_W25X64 0x3017
-#define WINBOND_NEX_W25Q40 0x4013
-#define WINBOND_NEX_W25Q80 0x4014
-#define WINBOND_NEX_W25Q16 0x4015
-#define WINBOND_NEX_W25Q32 0x4016
-#define WINBOND_NEX_W25Q64 0x4017
-#define WINBOND_NEX_W25Q128 0x4018
+#define WINBOND_NEX_W25Q40_V 0x4013 /* W25Q40BV; W25Q40BL (2.3-3.6V) */
+#define WINBOND_NEX_W25Q80_V 0x4014 /* W25Q80BV */
+#define WINBOND_NEX_W25Q16_V 0x4015 /* W25Q16CV; W25Q16DV */
+#define WINBOND_NEX_W25Q32_V 0x4016 /* W25Q32BV; W25Q32FV in SPI mode (default) */
+#define WINBOND_NEX_W25Q64_V 0x4017 /* W25Q64BV, W25Q64CV; W25Q64FV in SPI mode (default) */
+#define WINBOND_NEX_W25Q128_V 0x4018 /* W25Q128BV; W25Q128FV in SPI mode (default) */
+#define WINBOND_NEX_W25Q256_V 0x4019 /* W25Q256FV */
+#define WINBOND_NEX_W25Q20_W 0x5012 /* W25Q20BW */
+#define WINBOND_NEX_W25Q40_W 0x5013 /* W25Q40BW */
+#define WINBOND_NEX_W25Q80_W 0x5014 /* W25Q80BW */
+#define WINBOND_NEX_W25Q16_W 0x6015 /* W25Q16DW */
+#define WINBOND_NEX_W25Q32_W 0x6016 /* W25Q32DW; W25Q32FV in QPI mode */
+#define WINBOND_NEX_W25Q64_W 0x6017 /* W25Q64DW; W25Q64FV in QPI mode */
+#define WINBOND_NEX_W25Q128_W 0x6018 /* (No W version known) W25Q128FV in QPI mode */
#define WINBOND_ID 0xDA /* Winbond */
#define WINBOND_W19B160BB 0x49