flashchips: Add Puya P25Q06H, P25Q11H, P25Q21H 3.3V parts
These look like an update to the original quad-i/o chips. They
have a configuration register that is read/written like a third
status register. Otherwise, they seem very much compatible, but
have different IDs.
Datasheet used:
https://www.puyasemi.com/download_path/%E6%95%B0%E6%8D%AE%E6%89%8B%E5%86%8C/Flash/P25Q21H_11H_06H_Datasheet_V2.1.pdf
Change-Id: I984c574bcfd7275a2234c1db13935c01d12fab72
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.sourcearcade.org/c/flashprog/+/292
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
diff --git a/flashchips.c b/flashchips.c
index 50743cf..239b0ee 100644
--- a/flashchips.c
+++ b/flashchips.c
@@ -14849,6 +14849,64 @@
{
.vendor = "Puya",
+ .name = "P25Q06H",
+ .bustype = BUS_SPI,
+ .manufacture_id = PUYA_ID,
+ .model_id = PUYA_P25Q06H,
+ .total_size = 64,
+ .page_size = 256,
+ .feature_bits = FEATURE_WRSR_EITHER | FEATURE_WRSR_EXT2 | FEATURE_WRSR3 |
+ FEATURE_OTP | FEATURE_QIO,
+ .tested = TEST_UNTESTED,
+ .probe = probe_spi_rdid,
+ .probe_timing = TIMING_ZERO,
+ .block_erasers =
+ {
+ {
+ .eraseblocks = { {256, 256} },
+ .block_erase = spi_block_erase_81,
+ }, {
+ .eraseblocks = { {4 * 1024, 16} },
+ .block_erase = spi_block_erase_20,
+ }, {
+ .eraseblocks = { {32 * 1024, 2} },
+ .block_erase = spi_block_erase_52,
+ }, {
+ .eraseblocks = { {64 * 1024, 1} },
+ .block_erase = spi_block_erase_d8,
+ }, {
+ .eraseblocks = { {64 * 1024, 1} },
+ .block_erase = spi_block_erase_60,
+ }, {
+ .eraseblocks = { {64 * 1024, 1} },
+ .block_erase = spi_block_erase_c7,
+ },
+ },
+ .reg_bits =
+ {
+ .qe = {STATUS2, 1, RW},
+ .srp = {STATUS1, 7, RW},
+ .srl = {STATUS2, 0, RW},
+ .bp = {{STATUS1, 2, RW}, {STATUS1, 3, RW}, {STATUS1, 4, RW}},
+ .tb = {STATUS1, 5, RW},
+ .sec = {STATUS1, 6, RW},
+ .cmp = {STATUS2, 6, RW},
+ },
+ .wp_write_cfg = spi_wp_write_cfg,
+ .wp_read_cfg = spi_wp_read_cfg,
+ .wp_get_ranges = spi_wp_get_available_ranges,
+ .decode_range = decode_range_spi25,
+ .printlock = spi_prettyprint_status_register_bp4_srwd,
+ .unlock = spi_disable_blockprotect_bp4_srwd,
+ .write = spi_chip_write_256,
+ .read = spi_chip_read,
+ .voltage = {2300, 3600},
+ .prepare_access = spi_prepare_io,
+ .finish_access = spi_finish_io,
+ },
+
+ {
+ .vendor = "Puya",
.name = "P25Q10H",
.bustype = BUS_SPI,
.manufacture_id = PUYA_ID,
@@ -14907,6 +14965,64 @@
{
.vendor = "Puya",
+ .name = "P25Q11H",
+ .bustype = BUS_SPI,
+ .manufacture_id = PUYA_ID,
+ .model_id = PUYA_P25Q11H,
+ .total_size = 128,
+ .page_size = 256,
+ .feature_bits = FEATURE_WRSR_EITHER | FEATURE_WRSR_EXT2 | FEATURE_WRSR3 |
+ FEATURE_OTP | FEATURE_QIO,
+ .tested = TEST_UNTESTED,
+ .probe = probe_spi_rdid,
+ .probe_timing = TIMING_ZERO,
+ .block_erasers =
+ {
+ {
+ .eraseblocks = { {256, 512} },
+ .block_erase = spi_block_erase_81,
+ }, {
+ .eraseblocks = { {4 * 1024, 32} },
+ .block_erase = spi_block_erase_20,
+ }, {
+ .eraseblocks = { {32 * 1024, 4} },
+ .block_erase = spi_block_erase_52,
+ }, {
+ .eraseblocks = { {64 * 1024, 2} },
+ .block_erase = spi_block_erase_d8,
+ }, {
+ .eraseblocks = { {128 * 1024, 1} },
+ .block_erase = spi_block_erase_60,
+ }, {
+ .eraseblocks = { {128 * 1024, 1} },
+ .block_erase = spi_block_erase_c7,
+ },
+ },
+ .reg_bits =
+ {
+ .qe = {STATUS2, 1, RW},
+ .srp = {STATUS1, 7, RW},
+ .srl = {STATUS2, 0, RW},
+ .bp = {{STATUS1, 2, RW}, {STATUS1, 3, RW}, {STATUS1, 4, RW}},
+ .tb = {STATUS1, 5, RW},
+ .sec = {STATUS1, 6, RW},
+ .cmp = {STATUS2, 6, RW},
+ },
+ .wp_write_cfg = spi_wp_write_cfg,
+ .wp_read_cfg = spi_wp_read_cfg,
+ .wp_get_ranges = spi_wp_get_available_ranges,
+ .decode_range = decode_range_spi25,
+ .printlock = spi_prettyprint_status_register_bp4_srwd,
+ .unlock = spi_disable_blockprotect_bp4_srwd,
+ .write = spi_chip_write_256,
+ .read = spi_chip_read,
+ .voltage = {2300, 3600},
+ .prepare_access = spi_prepare_io,
+ .finish_access = spi_finish_io,
+ },
+
+ {
+ .vendor = "Puya",
.name = "P25Q20H",
.bustype = BUS_SPI,
.manufacture_id = PUYA_ID,
@@ -14965,6 +15081,64 @@
{
.vendor = "Puya",
+ .name = "P25Q21H",
+ .bustype = BUS_SPI,
+ .manufacture_id = PUYA_ID,
+ .model_id = PUYA_P25Q21H,
+ .total_size = 256,
+ .page_size = 256,
+ .feature_bits = FEATURE_WRSR_EITHER | FEATURE_WRSR_EXT2 | FEATURE_WRSR3 |
+ FEATURE_OTP | FEATURE_QIO,
+ .tested = TEST_UNTESTED,
+ .probe = probe_spi_rdid,
+ .probe_timing = TIMING_ZERO,
+ .block_erasers =
+ {
+ {
+ .eraseblocks = { {256, 1024} },
+ .block_erase = spi_block_erase_81,
+ }, {
+ .eraseblocks = { {4 * 1024, 64} },
+ .block_erase = spi_block_erase_20,
+ }, {
+ .eraseblocks = { {32 * 1024, 8} },
+ .block_erase = spi_block_erase_52,
+ }, {
+ .eraseblocks = { {64 * 1024, 4} },
+ .block_erase = spi_block_erase_d8,
+ }, {
+ .eraseblocks = { {256 * 1024, 1} },
+ .block_erase = spi_block_erase_60,
+ }, {
+ .eraseblocks = { {256 * 1024, 1} },
+ .block_erase = spi_block_erase_c7,
+ },
+ },
+ .reg_bits =
+ {
+ .qe = {STATUS2, 1, RW},
+ .srp = {STATUS1, 7, RW},
+ .srl = {STATUS2, 0, RW},
+ .bp = {{STATUS1, 2, RW}, {STATUS1, 3, RW}, {STATUS1, 4, RW}},
+ .tb = {STATUS1, 5, RW},
+ .sec = {STATUS1, 6, RW},
+ .cmp = {STATUS2, 6, RW},
+ },
+ .wp_write_cfg = spi_wp_write_cfg,
+ .wp_read_cfg = spi_wp_read_cfg,
+ .wp_get_ranges = spi_wp_get_available_ranges,
+ .decode_range = decode_range_spi25,
+ .printlock = spi_prettyprint_status_register_bp4_srwd,
+ .unlock = spi_disable_blockprotect_bp4_srwd,
+ .write = spi_chip_write_256,
+ .read = spi_chip_read,
+ .voltage = {2300, 3600},
+ .prepare_access = spi_prepare_io,
+ .finish_access = spi_finish_io,
+ },
+
+ {
+ .vendor = "Puya",
.name = "P25Q40H",
.bustype = BUS_SPI,
.manufacture_id = PUYA_ID,