Add support for the HP DL165 G6
Change the match for the HP DL145 G3 to avoid matching on the DL165 G6.
Corresponding to flashrom svn r1065.
Signed-off-by: Arne Georg Gleditsch <arne.gleditsch@numascale.com>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
diff --git a/board_enable.c b/board_enable.c
index 9c88f0b..f9f96cb 100644
--- a/board_enable.c
+++ b/board_enable.c
@@ -648,6 +648,20 @@
return 0;
}
+/*
+ * Set GPIO lines in the Broadcom HT-1000 southbridge.
+ *
+ * It's not a Super I/O but it uses the same index/data port method.
+ */
+static int board_hp_dl165_g6_enable(void)
+{
+ /* Variant of DL145, with slightly different pin placement. */
+ sio_mask(0xcd6, 0x44, 0x80, 0x80); /* TBL# */
+ sio_mask(0xcd6, 0x46, 0x04, 0x04); /* WP# */
+
+ return 0;
+}
+
static int board_ibm_x3455(void)
{
/* raise gpio13 */
@@ -1607,7 +1621,8 @@
{0x1106, 0x3227, 0x1458, 0x5001, 0x10ec, 0x8139, 0x1458, 0xe000, NULL, NULL, NULL, "GIGABYTE", "GA-7VT600", 0, OK, it8705f_write_enable_2e},
{0x1106, 0x0686, 0x1106, 0x0686, 0x1106, 0x3058, 0x1458, 0xa000, NULL, NULL, NULL, "GIGABYTE", "GA-7ZM", 512, OK, NULL},
{0x10DE, 0x0050, 0x1458, 0x0C11, 0x10DE, 0x005e, 0x1458, 0x5000, NULL, NULL, NULL, "GIGABYTE", "GA-K8N-SLI", 0, OK, nvidia_mcp_gpio21_raise},
- {0x1166, 0x0223, 0x103c, 0x320d, 0x102b, 0x0522, 0x103c, 0x31fa, NULL, "hp", "dl145_g3", "HP", "DL145 G3", 0, OK, board_hp_dl145_g3_enable},
+ {0x1166, 0x0223, 0x103c, 0x320d, 0x14e4, 0x1678, 0x103c, 0x703e, NULL, "hp", "dl145_g3", "HP", "DL145 G3", 0, OK, board_hp_dl145_g3_enable},
+ {0x1166, 0x0223, 0x103c, 0x320d, 0x14e4, 0x1648, 0x103c, 0x310f, NULL, "hp", "dl165_g6", "HP", "DL165 G6", 0, OK, board_hp_dl165_g6_enable},
{0x8086, 0x2415, 0x103c, 0x1249, 0x10b7, 0x9200, 0x103c, 0x1246, NULL, NULL, NULL, "HP", "Vectra VL400", 0, OK, board_hp_vl400},
{0x8086, 0x1a30, 0x103c, 0x1a30, 0x8086, 0x2443, 0x103c, 0x2440, "^VL420$", NULL, NULL, "HP", "VL420 SFF", 0, OK, intel_ich_gpio22_raise},
{0x10de, 0x0369, 0x103c, 0x12fe, 0x10de, 0x0364, 0x103c, 0x12fe, NULL, NULL, NULL, "HP", "xw9400", 0, OK, nvidia_mcp_gpio5_raise},