Add support for parallel flash on Dr. Kaiser PC-Waechter PCI devices
The vendor sold different designs under that name, the patch works with
the one that has an Actel FPGA as PCI-to-Flash bridge.
The Flash chip is a "Macronix MX29F001B" (128 KB, parallel) soldered
directly to the PCB.
Flash operations (PROBE, READ, ERASE, WRITE) work as expected.
Corresponding to flashrom svn r712.
Signed-off-by: TURBO J <turboj@gmx.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
diff --git a/satasii.c b/satasii.c
index 2564436..79d4325 100644
--- a/satasii.c
+++ b/satasii.c
@@ -47,7 +47,8 @@
get_io_perms();
- pcidev_init(PCI_VENDOR_ID_SII, satas_sii, programmer_param);
+ pcidev_init(PCI_VENDOR_ID_SII, PCI_BASE_ADDRESS_0, satas_sii,
+ programmer_param);
id = pcidev_dev->device_id;
if ((id == 0x3132) || (id == 0x3124)) {