Separate ST M50FLW support from generic JEDEC code
The generic jedec.c does not work for the ST M50FLW flash devices,
because they need an unlock command first. For this reason, ST M50FLW
support is moved to a new HW support module, because any change in
jedec.c would bear the risk to cause problems with the already supported
devices.
It's already tested with ST M50FLW080A; the other chips of this family i
dont have available, so i couldnt test it.
Corresponding to flashrom svn r219 and coreboot v2 svn r3274.
Signed-off-by: Claus Gindhart <claus.gindhart@kontron.com>
Acked-by: Stefan Reinauer <stepan@coresystems.de>
diff --git a/Makefile b/Makefile
index 2258360..9ea7d73 100644
--- a/Makefile
+++ b/Makefile
@@ -16,15 +16,15 @@
ifeq ($(OS_ARCH), SunOS)
LDFLAGS = -lpci -lz
else
-LDFLAGS = -lpci -lz -static
+LDFLAGS = -lpci -lz
STRIP_ARGS = -s
endif
-OBJS = chipset_enable.o board_enable.o udelay.o jedec.o sst28sf040.o \
- am29f040b.o mx29f002.o sst39sf020.o m29f400bt.o w49f002u.o \
- 82802ab.o msys_doc.o pm49fl004.o sst49lf040.o sst49lfxxxc.o \
- sst_fwhub.o layout.o cbtable.o flashchips.o flashrom.o \
- w39v080fa.o sharplhf00l04.o w29ee011.o spi.o
+OBJS = chipset_enable.o board_enable.o udelay.o jedec.o stm50flw0x0x.c \
+ sst28sf040.o am29f040b.o mx29f002.o sst39sf020.o m29f400bt.o \
+ w49f002u.o 82802ab.o msys_doc.o pm49fl004.o sst49lf040.o \
+ sst49lfxxxc.o sst_fwhub.o layout.o cbtable.o flashchips.o \
+ flashrom.o w39v080fa.o sharplhf00l04.o w29ee011.o spi.o
all: pciutils dep $(PROGRAM)
diff --git a/flash.h b/flash.h
index 930bf6d..3c07210 100644
--- a/flash.h
+++ b/flash.h
@@ -427,4 +427,8 @@
/* w49f002u.c */
int write_49f002(struct flashchip *flash, uint8_t *buf);
+/* stm50flw0x0x.c */
+int probe_stm50flw0x0x(struct flashchip *flash);
+int erase_stm50flw0x0x(struct flashchip *flash);
+int write_stm50flw0x0x(struct flashchip *flash, uint8_t *buf);
#endif /* !__FLASH_H__ */
diff --git a/flashchips.c b/flashchips.c
index 933948f..8955471 100644
--- a/flashchips.c
+++ b/flashchips.c
@@ -102,10 +102,10 @@
{"ST", "M29F400BT", ST_ID, ST_M29F400BT, 512, 64 * 1024, probe_m29f400bt, erase_m29f400bt, write_coreboot_m29f400bt},
{"ST", "M29W010B", ST_ID, ST_M29W010B, 128, 16 * 1024, probe_jedec, erase_chip_jedec, write_jedec},
{"ST", "M29W040B", ST_ID, ST_M29W040B, 512, 64 * 1024, probe_jedec, erase_chip_jedec, write_jedec},
- {"ST", "M50FLW040A", ST_ID, ST_M50FLW040A, 512, 64 * 1024, probe_jedec, erase_chip_jedec, write_jedec},
- {"ST", "M50FLW040B", ST_ID, ST_M50FLW040B, 512, 64 * 1024, probe_jedec, erase_chip_jedec, write_jedec},
- {"ST", "M50FLW080A", ST_ID, ST_M50FLW080A, 1024, 64 * 1024, probe_jedec, erase_chip_jedec, write_jedec},
- {"ST", "M50FLW080B", ST_ID, ST_M50FLW080B, 1024, 64 * 1024, probe_jedec, erase_chip_jedec, write_jedec},
+ {"ST", "M50FLW040A", ST_ID, ST_M50FLW040A, 512, 64 * 1024, probe_stm50flw0x0x, erase_stm50flw0x0x, write_stm50flw0x0x},
+ {"ST", "M50FLW040B", ST_ID, ST_M50FLW040B, 512, 64 * 1024, probe_stm50flw0x0x, erase_stm50flw0x0x, write_stm50flw0x0x},
+ {"ST", "M50FLW080A", ST_ID, ST_M50FLW080A, 1024, 64 * 1024, probe_stm50flw0x0x, erase_stm50flw0x0x, write_stm50flw0x0x},
+ {"ST", "M50FLW080B", ST_ID, ST_M50FLW080B, 1024, 64 * 1024, probe_stm50flw0x0x, erase_stm50flw0x0x, write_stm50flw0x0x},
{"ST", "M50FW016", ST_ID, ST_M50FW016, 2048, 64 * 1024, probe_82802ab, erase_82802ab, write_82802ab},
{"ST", "M50FW040", ST_ID, ST_M50FW040, 512, 64 * 1024, probe_82802ab, erase_82802ab, write_82802ab},
{"ST", "M50FW080", ST_ID, ST_M50FW080, 1024, 64 * 1024, probe_82802ab, erase_82802ab, write_82802ab},
diff --git a/stm50flw0x0x.c b/stm50flw0x0x.c
new file mode 100644
index 0000000..bc51c2f
--- /dev/null
+++ b/stm50flw0x0x.c
@@ -0,0 +1,293 @@
+/*
+ * This file is part of the flashrom project.
+ *
+ * Copyright (C) 2008 Claus Gindhart <claus.gindhart@kontron.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
+ */
+
+/*
+ * This module is designed for supporting the devices
+ * ST M50FLW040A (not yet tested)
+ * ST M50FLW040B (not yet tested)
+ * ST M50FLW080A
+ * ST M50FLW080B (not yet tested)
+ *
+ */
+
+#include <stdio.h>
+#include <string.h>
+#include <stdint.h>
+#include "flash.h"
+
+void protect_stm50flw0x0x(volatile uint8_t *bios)
+{
+ *(volatile uint8_t *)(bios + 0x5555) = 0xAA;
+ *(volatile uint8_t *)(bios + 0x2AAA) = 0x55;
+ *(volatile uint8_t *)(bios + 0x5555) = 0xA0;
+
+ usleep(200);
+}
+
+int probe_stm50flw0x0x(struct flashchip *flash)
+{
+ volatile uint8_t *bios = flash->virtual_memory;
+ uint8_t id1, id2;
+ uint32_t largeid1, largeid2;
+
+ /* Issue JEDEC Product ID Entry command */
+ *(volatile uint8_t *)(bios + 0x5555) = 0xAA;
+ myusec_delay(10);
+ *(volatile uint8_t *)(bios + 0x2AAA) = 0x55;
+ myusec_delay(10);
+ *(volatile uint8_t *)(bios + 0x5555) = 0x90;
+ myusec_delay(40);
+
+ /* Read product ID */
+ id1 = *(volatile uint8_t *)bios;
+ id2 = *(volatile uint8_t *)(bios + 0x01);
+ largeid1 = id1;
+ largeid2 = id2;
+
+ /* Check if it is a continuation ID, this should be a while loop. */
+ if (id1 == 0x7F) {
+ largeid1 <<= 8;
+ id1 = *(volatile uint8_t *)(bios + 0x100);
+ largeid1 |= id1;
+ }
+ if (id2 == 0x7F) {
+ largeid2 <<= 8;
+ id2 = *(volatile uint8_t *)(bios + 0x101);
+ largeid2 |= id2;
+ }
+
+ /* Issue JEDEC Product ID Exit command */
+ *(volatile uint8_t *)(bios + 0x5555) = 0xAA;
+ myusec_delay(10);
+ *(volatile uint8_t *)(bios + 0x2AAA) = 0x55;
+ myusec_delay(10);
+ *(volatile uint8_t *)(bios + 0x5555) = 0xF0;
+ myusec_delay(40);
+
+ printf_debug("%s: id1 0x%x, id2 0x%x\n", __FUNCTION__, largeid1,
+ largeid2);
+
+ if (largeid1 != flash->manufacture_id || largeid2 != flash->model_id)
+ return 0;
+
+ map_flash_registers(flash);
+
+ return 1;
+}
+
+
+static void wait_stm50flw0x0x(volatile uint8_t *bios)
+{
+ uint8_t id1;
+ // id2;
+
+ *bios = 0x70;
+ if ((*bios & 0x80) == 0) { // it's busy
+ while ((*bios & 0x80) == 0) ;
+ }
+ // put another command to get out of status register mode
+
+ *bios = 0x90;
+ myusec_delay(10);
+
+ id1 = *(volatile uint8_t *)bios;
+
+ // this is needed to jam it out of "read id" mode
+ *(volatile uint8_t *)(bios + 0x5555) = 0xAA;
+ *(volatile uint8_t *)(bios + 0x2AAA) = 0x55;
+ *(volatile uint8_t *)(bios + 0x5555) = 0xF0;
+
+}
+
+/*
+ * claus.gindhart@kontron.com
+ * The ST M50FLW080B and STM50FLW080B chips have to be unlocked,
+ * before you can erase them or write to them
+*/
+int unlock_block_stm50flw0x0x(struct flashchip *flash, int offset)
+{
+ volatile uint8_t *flash_addr = flash->virtual_registers + 2;
+ const uint8_t unlock_sector = 0x00;
+ int j;
+
+ /* These chips have to be unlocked before you can erase
+ * them or write to them
+ * The size of the locking sectors depends on the type
+ * of chip
+ *
+ * Sometimes, the BIOS does this for you; so you propably
+ * dont need to worry about that
+ */
+
+ /* check, if it's is a top/bottom-block with 4k-sectors */
+ /* TODO: What about the other types ? */
+ if ((offset == 0) ||
+ (offset == (flash->model_id == ST_M50FLW080A ? 0xE0000 : 0x10000))
+ || (offset == 0xF0000)) {
+
+ // unlock each 4k-sector
+ for (j = 0; j < 0x10000; j += 0x1000) {
+ printf_debug("unlocking at 0x%x\n", offset + j);
+ *(flash_addr + offset + j) = unlock_sector;
+ if (*(flash_addr + offset + j) != unlock_sector)
+ {
+ printf("Cannot unlock sector @ 0x%x\n",offset + j);
+ return -1;
+ }
+ }
+ } else {
+ printf_debug("unlocking at 0x%x\n", offset);
+ *(flash_addr + offset) = unlock_sector;
+ if (*(flash_addr + offset) != unlock_sector)
+ {
+ printf("Cannot unlock sector @ 0x%x\n", offset);
+ return -1;
+ }
+ }
+
+ return 0;
+}
+
+int erase_block_stm50flw0x0x(struct flashchip *flash, int offset)
+{
+ volatile uint8_t *bios = flash->virtual_memory + offset;
+ int j;
+
+ // clear status register
+ *bios = 0x50;
+ printf_debug("Erase at %p\n", bios);
+ // now start it
+ *(volatile uint8_t *)(bios) = 0x20;
+ *(volatile uint8_t *)(bios) = 0xd0;
+ myusec_delay(10);
+
+ wait_stm50flw0x0x(flash->virtual_memory);
+
+ for (j = 0; j < flash->page_size; j++) {
+ if (*(bios + j) != 0xFF) {
+ printf("Erase failed at 0x%x\n", offset + j);
+ return -1;
+ }
+ }
+
+ printf("DONE BLOCK 0x%x\n", offset);
+
+ return 0;
+}
+
+int write_page_stm50flw0x0x(volatile uint8_t *bios, uint8_t *src,
+ volatile uint8_t *dst, int page_size)
+{
+ int i, rc=0;
+ volatile uint8_t *d = dst;
+ uint8_t *s = src;
+
+ /* transfer data from source to destination */
+ for (i = 0; i < page_size; i++) {
+ *dst = 0x40;
+ *dst++ = *src++;
+ wait_stm50flw0x0x(bios);
+ }
+
+/* claus.gindhart@kontron.com
+ * TODO
+ * I think, that verification is not required, but
+ * i leave it in anyway
+ */
+ dst = d;
+ src = s;
+ for (i = 0; i < page_size; i++) {
+ if (*dst != *src) {
+ rc = -1;
+ break;
+ }
+ dst++;
+ src++;
+ }
+
+ if (rc) {
+ fprintf(stderr, " page %d failed!\n",
+ (unsigned int)(d - bios) / page_size);
+ }
+
+ return rc;
+}
+
+/* I simply erase block by block
+ * I Chip This is not the fastest way, but it works
+ */
+int erase_stm50flw0x0x(struct flashchip *flash)
+{
+ int i,rc=0;
+ int total_size = flash->total_size * 1024;
+ int page_size = flash->page_size;
+ volatile uint8_t *bios = flash->virtual_memory;
+
+ printf("Erasing page:\n");
+ for (i = 0;(i < total_size / page_size) && (rc==0); i++) {
+ printf
+ ("\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b");
+ printf("%04d at address: 0x%08x ", i, i * page_size);
+ rc = unlock_block_stm50flw0x0x(flash, i * page_size);
+ if (!rc) rc = erase_block_stm50flw0x0x(flash, i * page_size);
+ }
+ printf("\n");
+ protect_stm50flw0x0x(bios);
+
+ return rc;
+}
+
+int write_stm50flw0x0x(struct flashchip *flash, uint8_t * buf)
+{
+ int i,rc=0;
+ int total_size = flash->total_size * 1024;
+ int page_size = flash->page_size;
+ volatile uint8_t *bios = flash->virtual_memory;
+
+ printf("Programming page: \n");
+ for (i = 0;(i < total_size / page_size) && (rc==0); i++) {
+ printf
+ ("\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b");
+ printf("%04d at address: 0x%08x ", i, i * page_size);
+
+ /* Auto Skip Blocks, which already contain the desired data
+ * Faster, because we only write, what has changed
+ * More secure, because blocks, which are excluded
+ * (with the exclude or layout feature)
+ * are not erased and rewritten; data is retained also
+ * in sudden power off situations
+ */
+ if (!memcmp((void *)(buf + i * page_size),
+ (void *)(bios + i * page_size), page_size)) {
+ printf("SKIPPED\n");
+ continue;
+ }
+
+ rc = unlock_block_stm50flw0x0x(flash, i * page_size);
+ if (!rc) rc = erase_block_stm50flw0x0x(flash, i * page_size);
+ if (!rc) write_page_stm50flw0x0x(bios, buf + i * page_size,
+ bios + i * page_size, page_size);
+ }
+ printf("\n");
+ protect_stm50flw0x0x(bios);
+
+ return rc;
+}