)]}'
{
  "commit": "a6a0d2000a1197e90faaf8d9e7697c96f1deb934",
  "tree": "edbcfbcc9921b732f9c69f2d72e20e184ec2b4b4",
  "parents": [
    "949ccc8a7ed2a7ad075103e064ad92483ffa8720"
  ],
  "author": {
    "name": "Stefan Tauner",
    "email": "stefan.tauner@alumni.tuwien.ac.at",
    "time": "Sun Sep 15 14:17:39 2013 +0000"
  },
  "committer": {
    "name": "Stefan Tauner",
    "email": "stefan.tauner@alumni.tuwien.ac.at",
    "time": "Sun Sep 15 14:17:39 2013 +0000"
  },
  "message": "sbxxx: Set SPI clock to 16.5 MHz and disable fast reads\n\nDo not rely on broken firmware to set up the SPI configuration correctly.\nSome boards fail with flashrom because the firmware chose too high speeds\nfor the alternate SPI mode which flashrom uses. Temporarily change the\nclock to the lowest common value of 16.5 MHz.\n\nAlso, disable fast reads just to be safe.\n\nCorresponding to flashrom svn r1750.\n\nSigned-off-by: Stefan Tauner \u003cstefan.tauner@alumni.tuwien.ac.at\u003e\nAcked-by: Carl-Daniel Hailfinger \u003cc-d.hailfinger.devel.2006@gmx.net\u003e\n",
  "tree_diff": [
    {
      "type": "modify",
      "old_id": "8f93d6521bee4a207037fbd6b0f6e5337b100162",
      "old_mode": 33188,
      "old_path": "sb600spi.c",
      "new_id": "9523591aa26bdf8facd346fa65b4e14684952dfa",
      "new_mode": 33188,
      "new_path": "sb600spi.c"
    }
  ]
}