Add support for Sanyo LE25FW106
Also, add spi_disable_blockprotect_bp1_srwd().
Originally written and tested by The Raven <originalraven@hotmail.com>.
Corresponding to flashrom svn r1818.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
diff --git a/flashchips.c b/flashchips.c
index 1bb6f27..0c3bb68 100644
--- a/flashchips.c
+++ b/flashchips.c
@@ -9153,6 +9153,37 @@
{
.vendor = "Sanyo",
+ .name = "LE25FW106",
+ .bustype = BUS_SPI,
+ .manufacture_id = SANYO_ID,
+ .model_id = SANYO_LE25FW106,
+ .total_size = 128,
+ .page_size = 256,
+ .feature_bits = FEATURE_WRSR_WREN,
+ .tested = TEST_OK_PREW,
+ .probe = probe_spi_res2,
+ .probe_timing = TIMING_ZERO,
+ .block_erasers = {
+ {
+ .eraseblocks = { {2 * 1024, 64} },
+ .block_erase = spi_block_erase_d7,
+ }, {
+ .eraseblocks = { {32 * 1024, 4} },
+ .block_erase = spi_block_erase_d8,
+ }, {
+ .eraseblocks = { {128 * 1024, 1} },
+ .block_erase = spi_block_erase_c7,
+ }
+ },
+ .printlock = spi_prettyprint_status_register_bp1_srwd, /* FIXME: Add ERSER error flag. */
+ .unlock = spi_disable_blockprotect_bp1_srwd,
+ .write = spi_chip_write_256,
+ .read = spi_chip_read,
+ .voltage = {2700, 3600},
+ },
+
+ {
+ .vendor = "Sanyo",
.name = "LE25FW406A",
.bustype = BUS_SPI,
.manufacture_id = SANYO_ID,