Convert printf to msg_* where appropriate
Clean up cli_output.c to be more readable.
Use enum instead of #define for message levels.
Kill a few exit(0) calls.
Print the command line arguments in verbose mode.
Move actions (--list-supported etc.) after argument sanity checks.
Reduce the number of code paths which have their own
programmer_shutdown().
Corresponding to flashrom svn r1536.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
diff --git a/cli_classic.c b/cli_classic.c
index 972043b..edcef8e 100644
--- a/cli_classic.c
+++ b/cli_classic.c
@@ -159,6 +159,18 @@
exit(1);
}
+static int check_filename(char *filename, char *type)
+{
+ if (!filename || (filename[0] == '\0')) {
+ fprintf(stderr, "Error: No %s file specified.\n", type);
+ return 1;
+ }
+ /* Not an error, but maybe the user intended to specify a CLI option instead of a file name. */
+ if (filename[0] == '-')
+ fprintf(stderr, "Warning: Supplied %s file name starts with -\n", type);
+ return 0;
+}
+
int main(int argc, char *argv[])
{
unsigned long size;
@@ -377,36 +389,51 @@
cli_classic_abort_usage();
}
- /* FIXME: Print the actions flashrom will take. */
-
- if (list_supported) {
- print_supported();
- exit(0);
+ if ((read_it | write_it | verify_it) && check_filename(filename, "image")) {
+ cli_classic_abort_usage();
+ }
+ if (layoutfile && check_filename(layoutfile, "layout")) {
+ cli_classic_abort_usage();
}
#if CONFIG_PRINT_WIKI == 1
if (list_supported_wiki) {
print_supported_wiki();
- exit(0);
+ ret = 0;
+ goto out;
}
#endif
- if (layoutfile && read_romlayout(layoutfile))
- cli_classic_abort_usage();
- if (process_include_args())
- cli_classic_abort_usage();
+ if (list_supported) {
+ print_supported();
+ ret = 0;
+ goto out;
+ }
+ msg_gdbg("Command line (%i args):", argc - 1);
+ for (i = 0; i < argc; i++) {
+ msg_gdbg(" %s", argv[i]);
+ }
+ msg_gdbg("\n");
+
+ if (layoutfile && read_romlayout(layoutfile)) {
+ ret = 1;
+ goto out;
+ }
+ if (process_include_args()) {
+ ret = 1;
+ goto out;
+ }
/* Does a chip with the requested name exist in the flashchips array? */
if (chip_to_probe) {
for (flash = flashchips; flash && flash->name; flash++)
if (!strcmp(flash->name, chip_to_probe))
break;
if (!flash || !flash->name) {
- fprintf(stderr, "Error: Unknown chip '%s' specified.\n",
- chip_to_probe);
- printf("Run flashrom -L to view the hardware supported "
- "in this flashrom version.\n");
- exit(1);
+ msg_cerr("Error: Unknown chip '%s' specified.\n", chip_to_probe);
+ msg_gerr("Run flashrom -L to view the hardware supported in this flashrom version.\n");
+ ret = 1;
+ goto out;
}
/* Clean up after the check. */
flash = NULL;
@@ -419,7 +446,7 @@
myusec_calibrate_delay();
if (programmer_init(prog, pparam)) {
- fprintf(stderr, "Error: Programmer initialization failed.\n");
+ msg_perr("Error: Programmer initialization failed.\n");
ret = 1;
goto out_shutdown;
}
@@ -442,25 +469,22 @@
}
if (chipcount > 1) {
- printf("Multiple flash chips were detected: \"%s\"",
- flashes[0].name);
+ msg_cinfo("Multiple flash chips were detected: \"%s\"", flashes[0].name);
for (i = 1; i < chipcount; i++)
- printf(", \"%s\"", flashes[i].name);
- printf("\nPlease specify which chip to use with the "
- "-c <chipname> option.\n");
+ msg_cinfo(", \"%s\"", flashes[i].name);
+ msg_cinfo("\nPlease specify which chip to use with the -c <chipname> option.\n");
ret = 1;
goto out_shutdown;
} else if (!chipcount) {
- printf("No EEPROM/flash device found.\n");
+ msg_cinfo("No EEPROM/flash device found.\n");
if (!force || !chip_to_probe) {
- printf("Note: flashrom can never write if the flash "
- "chip isn't found automatically.\n");
+ msg_cinfo("Note: flashrom can never write if the flash chip isn't found "
+ "automatically.\n");
}
if (force && read_it && chip_to_probe) {
struct registered_programmer *pgm;
int compatible_programmers = 0;
- printf("Force read (-f -r -c) requested, pretending "
- "the chip is there:\n");
+ msg_cinfo("Force read (-f -r -c) requested, pretending the chip is there:\n");
/* This loop just counts compatible controllers. */
for (j = 0; j < registered_programmer_count; j++) {
pgm = ®istered_programmers[j];
@@ -468,9 +492,8 @@
compatible_programmers++;
}
if (compatible_programmers > 1)
- printf("More than one compatible controller "
- "found for the requested flash chip, "
- "using the first one.\n");
+ msg_cinfo("More than one compatible controller found for the requested flash "
+ "chip, using the first one.\n");
for (j = 0; j < registered_programmer_count; j++) {
pgm = ®istered_programmers[j];
startchip = probe_flash(pgm, 0, &flashes[0], 1);
@@ -478,14 +501,13 @@
break;
}
if (startchip == -1) {
- printf("Probing for flash chip '%s' failed.\n",
- chip_to_probe);
+ msg_cinfo("Probing for flash chip '%s' failed.\n", chip_to_probe);
ret = 1;
goto out_shutdown;
}
- printf("Please note that forced reads most likely "
- "contain garbage.\n");
- return read_flash_to_file(&flashes[0], filename);
+ msg_cinfo("Please note that forced reads most likely contain garbage.\n");
+ ret = read_flash_to_file(&flashes[0], filename);
+ goto out_shutdown;
}
ret = 1;
goto out_shutdown;
@@ -503,22 +525,14 @@
check_chip_supported(fill_flash);
size = fill_flash->total_size * 1024;
- if (check_max_decode(fill_flash->pgm->buses_supported & fill_flash->bustype, size) &&
- (!force)) {
- fprintf(stderr, "Chip is too big for this programmer "
- "(-V gives details). Use --force to override.\n");
+ if (check_max_decode(fill_flash->pgm->buses_supported & fill_flash->bustype, size) && (!force)) {
+ msg_cerr("Chip is too big for this programmer (-V gives details). Use --force to override.\n");
ret = 1;
goto out_shutdown;
}
if (!(read_it | write_it | verify_it | erase_it)) {
- printf("No operations were specified.\n");
- goto out_shutdown;
- }
-
- if (!filename && !erase_it) {
- printf("Error: No filename specified.\n");
- ret = 1;
+ msg_ginfo("No operations were specified.\n");
goto out_shutdown;
}
@@ -531,9 +545,12 @@
* Give the chip time to settle.
*/
programmer_delay(100000);
- return doit(fill_flash, force, filename, read_it, write_it, erase_it, verify_it);
+ ret |= doit(fill_flash, force, filename, read_it, write_it, erase_it, verify_it);
+ /* Note: doit() already calls programmer_shutdown(). */
+ goto out;
out_shutdown:
programmer_shutdown();
+out:
return ret;
}