diff --git a/flashchips.c b/flashchips.c
index b09727c..789f17f 100644
--- a/flashchips.c
+++ b/flashchips.c
@@ -2317,12 +2317,37 @@
 
 	{
 		.vendor		= "Atmel",
+		.name		= "AT49(H)F010",
+		.bustype	= BUS_PARALLEL,
+		.manufacture_id	= ATMEL_ID,
+		.model_id	= ATMEL_AT49F010,
+		.total_size	= 128,
+		.page_size	= 0, /* unused */
+		.feature_bits	= FEATURE_EITHER_RESET,
+		.tested		= TEST_OK_PREW,
+		.probe		= probe_jedec,
+		.probe_timing	= TIMING_ZERO,	/* Datasheet has no timing info specified */
+		.block_erasers	=
+		{
+			{
+				.eraseblocks = { {128 * 1024, 1} },
+				.block_erase = erase_chip_block_jedec,
+			}
+		},
+		.printlock	= printlock_at49f,
+ 		.write		= write_jedec_1,
+		.read		= read_memmapped,
+		.voltage	= {4500, 5500},
+	},
+
+	{
+		.vendor		= "Atmel",
 		.name		= "AT49F020",
 		.bustype	= BUS_PARALLEL,
 		.manufacture_id	= ATMEL_ID,
 		.model_id	= ATMEL_AT49F020,
 		.total_size	= 256,
-		.page_size	= 256,
+		.page_size	= 0, /* unused */
 		.feature_bits	= FEATURE_EITHER_RESET,
 		.tested		= TEST_OK_PRE,
 		.probe		= probe_jedec,
@@ -2353,7 +2378,7 @@
 		.manufacture_id	= ATMEL_ID,
 		.model_id	= ATMEL_AT49F040,
 		.total_size	= 512,
-		.page_size	= 512,
+		.page_size	= 0, /* unused */
 		.feature_bits	= FEATURE_EITHER_RESET,
 		.tested		= TEST_UNTESTED,
 		.probe		= probe_jedec,
@@ -2379,6 +2404,69 @@
 
 	{
 		.vendor		= "Atmel",
+		.name		= "AT49F080",
+		.bustype	= BUS_PARALLEL,
+		.manufacture_id	= ATMEL_ID,
+		.model_id	= ATMEL_AT49F080,
+		.total_size	= 1024,
+		.page_size	= 0, /* unused */
+		.feature_bits	= FEATURE_EITHER_RESET,
+		.tested		= TEST_UNTESTED,
+		.probe		= probe_jedec,
+		.probe_timing	= TIMING_ZERO,  /* Datasheet has no timing info specified */
+		.block_erasers	=
+		{
+			{
+				.eraseblocks = { {1024 * 1024, 1} },
+				.block_erase = erase_chip_block_jedec,
+			}
+			/* Chip features an optional permanent write protection
+			 * of the first 16 kB. The erase function is the same as
+			 * above, but 00000H to 03FFFH will not be erased.
+			 * FIXME: add another eraser when partial erasers are
+			 * supported.
+			 */
+		},
+		.printlock	= printlock_at49f,
+		.write		= write_jedec_1,
+		.read		= read_memmapped,
+		.voltage	= {4500, 5500},
+	},
+
+	{
+		/* 'top' version of AT49F080. equal in all aspects but the boot block address */
+		.vendor		= "Atmel",
+		.name		= "AT49F080T",
+		.bustype	= BUS_PARALLEL,
+		.manufacture_id	= ATMEL_ID,
+		.model_id	= ATMEL_AT49F080T,
+		.total_size	= 1024,
+		.page_size	= 0, /* unused */
+		.feature_bits	= FEATURE_EITHER_RESET,
+		.tested		= TEST_UNTESTED,
+		.probe		= probe_jedec,
+		.probe_timing	= TIMING_ZERO,  /* Datasheet has no timing info specified */
+		.block_erasers	=
+		{
+			{
+				.eraseblocks = { {1024 * 1024, 1} },
+				.block_erase = erase_chip_block_jedec,
+			}
+			/* Chip features an optional permanent write protection
+			 * of the first 16 kB. The erase function is the same as
+			 * above, but FC000H to FFFFFH will not be erased.
+			 * FIXME: add another eraser when partial erasers are
+			 * supported.
+			 */
+		},
+		.printlock	= printlock_at49f,
+		.write		= write_jedec_1,
+		.read		= read_memmapped,
+		.voltage	= {4500, 5500},
+	},
+
+	{
+		.vendor		= "Atmel",
 		.name		= "AT49LH002",
 		.bustype	= BUS_LPC | BUS_FWH, /* A/A Mux */
 		.manufacture_id	= ATMEL_ID,
diff --git a/flashchips.h b/flashchips.h
index 0ecb5f3..0fe2cc4 100644
--- a/flashchips.h
+++ b/flashchips.h
@@ -187,8 +187,11 @@
 #define ATMEL_AT49F002N		0x07	/* for AT49F002(N)  */
 #define ATMEL_AT49LH002		0xE9
 #define ATMEL_AT49F002NT	0x08	/* for AT49F002(N)T */
+#define ATMEL_AT49F010		0x17	/* Same as AT49HF010 */
 #define ATMEL_AT49F020		0x0B
 #define ATMEL_AT49F040		0x13
+#define ATMEL_AT49F080		0x23
+#define ATMEL_AT49F080T		0x27
 
 /* Bright Microelectronics has the same manufacturer ID as Hyundai... */
 #define BRIGHT_ID		0xAD	/* Bright Microelectronics */