CID1130000: Unchecked return value in default_spi_write_aai()

Also, try to always disable WRDI because else the user is stuck
with a chip in AAI mode that won't return by itself w/o a reset.

Corresponding to flashrom svn r1779.

Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
diff --git a/spi25.c b/spi25.c
index e001196..69be073 100644
--- a/spi25.c
+++ b/spi25.c
@@ -1128,13 +1128,9 @@
 
 
 	result = spi_send_multicommand(flash, cmds);
-	if (result) {
-		msg_cerr("%s failed during start command execution\n",
-			 __func__);
-		/* FIXME: Should we send WRDI here as well to make sure the chip
-		 * is not in AAI mode?
-		 */
-		return result;
+	if (result != 0) {
+		msg_cerr("%s failed during start command execution: %d\n", __func__, result);
+		goto bailout;
 	}
 	while (spi_read_status_register(flash) & SPI_SR_WIP)
 		programmer_delay(10);
@@ -1146,8 +1142,11 @@
 	while (pos < start + len - 1) {
 		cmd[1] = buf[pos++ - start];
 		cmd[2] = buf[pos++ - start];
-		spi_send_command(flash, JEDEC_AAI_WORD_PROGRAM_CONT_OUTSIZE, 0,
-				 cmd, NULL);
+		result = spi_send_command(flash, JEDEC_AAI_WORD_PROGRAM_CONT_OUTSIZE, 0, cmd, NULL);
+		if (result != 0) {
+			msg_cerr("%s failed during followup AAI command execution: %d\n", __func__, result);
+			goto bailout;
+		}
 		while (spi_read_status_register(flash) & SPI_SR_WIP)
 			programmer_delay(10);
 	}
@@ -1165,4 +1164,8 @@
 	}
 
 	return 0;
+
+bailout:
+	spi_write_disable(flash);
+	return SPI_GENERIC_ERROR;
 }