diff --git a/flashrom.8 b/flashrom.8
index 5ca14fc..87dd69b 100644
--- a/flashrom.8
+++ b/flashrom.8
@@ -152,6 +152,10 @@
 .sp
 .BR "* nic3com" " (for flash ROMs on 3COM network cards)"
 .sp
+.BR "* nicrealtek" " (for flash ROMs on Realtek network cards)"
+.sp
+.BR "* nicsmc1211" " (for flash ROMs on RTL8139-compatible SMC2 network cards)"
+.sp
 .BR "* gfxnvidia" " (for flash ROMs on NVIDIA graphics cards)"
 .sp
 .BR "* drkaiser" " (for flash ROMs on Dr. Kaiser PC-Waechter PCI cards)"
@@ -276,7 +280,7 @@
 Example:
 .B "flashrom -p dummy:lpc,fwh"
 .TP
-.BR "nic3com" , " gfxnvidia" , " satasii " and " atahpt " programmers
+.BR "nic3com" , " nicrealtek" , " nicsmc1211" , " gfxnvidia" , " satasii " and " atahpt " programmers
 These programmers have an option to specify the PCI address of the card
 your want to use, which must be specified if more than one card supported
 by the selected programmer is installed in your system. The syntax is
diff --git a/nicrealtek.c b/nicrealtek.c
index 6f0097f..80291f1 100644
--- a/nicrealtek.c
+++ b/nicrealtek.c
@@ -30,34 +30,34 @@
 #define BIOS_ROM_DATA		0xD7
 
 struct pcidev_status nics_realtek[] = {
-	{0x10ec, 0x8139, OK, "Realtek","rtl8139b/c PCI 10/100 Mbps"},
+	{0x10ec, 0x8139, OK, "Realtek", "RTL8139/8139C/8139C+"},
 	{},
 };
 
 struct pcidev_status nics_realteksmc1211[] = {
-	{0x1113, 0x1211, OK, "SMC", "SMC 1211TX rtl8139 clone 10/100 Mbps"},
-	{}
+	{0x1113, 0x1211, OK, "SMC2", "1211TX"}, /* RTL8139 clone */
+	{},
 };
 
-
 int nicrealtek_init(void)
 {
 	get_io_perms();
+
 	io_base_addr = pcidev_init(PCI_VENDOR_ID_REALTEK, PCI_BASE_ADDRESS_0,
-			nics_realtek, programmer_param);
-	
+				   nics_realtek, programmer_param);
+
 	buses_supported = CHIP_BUSTYPE_PARALLEL;
 
 	return 0;
 }
 
-
 int nicsmc1211_init(void)
 {
 	get_io_perms();
+
 	io_base_addr = pcidev_init(PCI_VENDOR_ID_SMC1211, PCI_BASE_ADDRESS_0,
-			nics_realteksmc1211, programmer_param);
-	
+				   nics_realteksmc1211, programmer_param);
+
 	buses_supported = CHIP_BUSTYPE_PARALLEL;
 
 	return 0;
@@ -73,17 +73,23 @@
 
 void nicrealtek_chip_writeb(uint8_t val, chipaddr addr)
 {
-	OUTL(((uint32_t)addr &0x01FFFF)|0x0A0000| (val << 24), io_base_addr + BIOS_ROM_ADDR);
-	OUTL(((uint32_t)addr &0x01FFFF)|0x1E0000| (val << 24), io_base_addr + BIOS_ROM_ADDR);
+	OUTL(((uint32_t)addr & 0x01FFFF) | 0x0A0000 | (val << 24),
+	     io_base_addr + BIOS_ROM_ADDR);
+	OUTL(((uint32_t)addr & 0x01FFFF) | 0x1E0000 | (val << 24),
+	     io_base_addr + BIOS_ROM_ADDR);
 }
 
 uint8_t nicrealtek_chip_readb(const chipaddr addr)
-
 {
-	uint8_t val=INB(io_base_addr + BIOS_ROM_DATA);
-	OUTL(((uint32_t)addr & 0x01FFFF) | 0x060000 | (val << 24), io_base_addr + BIOS_ROM_ADDR);
-	val=INB(io_base_addr + BIOS_ROM_DATA);
-	OUTL(((uint32_t)addr & 0x01FFFF) | 0x1E0000 | (val << 24), io_base_addr + BIOS_ROM_ADDR);
-	return val ;
+	uint8_t val;
 
+	val = INB(io_base_addr + BIOS_ROM_DATA);
+	OUTL(((uint32_t)addr & 0x01FFFF) | 0x060000 | (val << 24),
+	     io_base_addr + BIOS_ROM_ADDR);
+
+	val = INB(io_base_addr + BIOS_ROM_DATA);
+	OUTL(((uint32_t)addr & 0x01FFFF) | 0x1E0000 | (val << 24),
+	     io_base_addr + BIOS_ROM_ADDR);
+
+	return val;
 }
diff --git a/print.c b/print.c
index abc1209..4d91d33 100644
--- a/print.c
+++ b/print.c
@@ -238,6 +238,10 @@
 #if NIC3COM_SUPPORT == 1
 		print_supported_pcidevs(nics_3com);
 #endif
+#if NICREALTEK_SUPPORT == 1
+		print_supported_pcidevs(nics_realtek);
+		print_supported_pcidevs(nics_realteksmc1211);
+#endif
 #if GFXNVIDIA_SUPPORT == 1
 		print_supported_pcidevs(gfx_nvidia);
 #endif
diff --git a/print_wiki.c b/print_wiki.c
index f80248f..4d7f3ef 100644
--- a/print_wiki.c
+++ b/print_wiki.c
@@ -592,6 +592,10 @@
 #if NIC3COM_SUPPORT == 1
 	print_supported_pcidevs_wiki(nics_3com);
 #endif
+#if NICREALTEK_SUPPORT == 1
+	print_supported_pcidevs_wiki(nics_realtek);
+	print_supported_pcidevs_wiki(nics_realteksmc1211);
+#endif
 #if GFXNVIDIA_SUPPORT == 1
 	print_supported_pcidevs_wiki(gfx_nvidia);
 #endif